Application Information
The TPMC683 is a standard single-width 32 bit PMC module offering 32 differential I/O lines using EIA-422 / EIA-485 compatible, ESD-protected line transceivers.
Each line is individually programmable as input or output. The receivers are always enabled, which allows determining the state of each I/O line at any time. This can be used as read back function for lines configured as outputs.
Each input can generate an interrupt. Signal edge handling is programmable to interrupt on rising and/or falling edge of an input signal. Interrupts can be enabled and disabled for each bit. For interrupt source detection, the status of each line can be read from interrupt status registers.
The TPMC683 provides front panel I/O via a HD68 SCSI-3 type connector and rear panel I/O via P14.
Software Support (TDRV012-SW-xx) for different operating systems is available.