General description

The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D)

inputs, clock (CP) inputs, set (SD) and reset (RD) inputs, and complementary Q and Q

outputs.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing damaging backflow current through the device when it is powered down.

The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation.

Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and

fall times.

Features and benefits

 Wide supply voltage range from 1.65 V to 5.5 V

 5 V tolerant inputs for interfacing with 5 V logic

 High noise immunity

 Complies with JEDEC standard:

   JESD8-7 (1.65 V to 1.95 V)

   JESD8-5 (2.3 V to 2.7 V)

      JESD8-B/JESD36 (2.7 V to 3.6 V)

 ESD protection:

   HBM JESD22-A114F exceeds 2000 V

   MM JESD22-A115-A exceeds 200 V

±24 mA output drive (VCC=3.0V)

   CMOS low power consumption

Latch-up performance exceeds 250 mA

Direct interface with TTL levels

   Inputs accept voltages up to 5 V

Multiple package options

   Specified from -40F℃ to +85℃ and 40℃ to +125℃