Eight 8-Bit Voltage Output DACs
3-V Single Supply Operation
Serial Interface
High-Impedance Reference Inputs
Programmable for 1 or 2 Times Output
Range
Simultaneous Update Facility
Internal Power-On Reset
Low Power Consumption
Half-Buffered Output

applications
Programmable Voltage Sources
Digitally Controlled Amplifiers/Attenuators
Mobile Communications
Automatic Test Equipment
Process Monitoring and Control
Signal Synthesis

description
The TLV5628C and TLV5628I are octal 8-bit voltage output digital-to-analog converters (DACs) with buffered
reference inputs (high impedance). The DACs produce an output voltage that varies between one or two times
the reference voltages and GND, and the DACs are monotonic. The device is simple to use, running from a
single supply of 3 to 3.6 V. A power-on reset function is incorporated to ensure repeatable start-up conditions.
Digital control of the TLV5628C and TLV5628I is over a simple 3-wire serial bus that is CMOS compatible and
easily interfaced to all popular microprocessor and microcontroller devices. The 12-bit command word
comprises 8 bits of data, 3 DAC select bits and a range bit, the latter allowing selection between the times 1
or times 2 output range. The DAC registers are double buffered, allowing a complete set of new values to be
written to the device, then all DAC outputs are updated simultaneously through control of the LDAC terminal.
The digital inputs feature Schmitt triggers for high noise immunity.
The 16-terminal small-outline D package allows digital control of analog functions in space-critical applications.
The TLV5628C is characterized for operation from 0°C to 70°C. The TLV5628I is characterized for operation
from –40°C to 85°C. The TLV5628C and TLV5628I do not require external trimming.