DESCRIPTION
The µPort Saver memories need no serial ports or special hardware and connect to the processor memory bus. Replacing bytewide data memory, the µPort Saver uses bytewide memory control functions, takes a fraction of the board space and consumes much less power. Replacing serial memories, the µPort Saver provides all the serial benefits, such as low cost, low power, low voltage, and small package size while releasing I/Os for more important uses.

FEATURES
• Up to 15MHz data transfer rate
• 20ns Read Access Time
• Direct Interface to Microprocessors and Microcontrollers
    —Eliminates I/O port requirements
    —No interface glue logic required
    —Eliminates need for parallel to serial converters
• Low Power CMOS
    —1.8V–3.6V, 2.5V–5.5V and 5V ± 10% Versions
    —Standby Current Less than 1µA
    —Active Current Less than 1mA
• Byte or Page Write Capable
    —32-Byte Page Write Mode
• New Programmable Block Lock™ Protection
    —Software Write Protection
    —Programmable Hardware Write Protection
• Block Lock (0, 1/4, 1/2, or all of the array)
• Typical Nonvolatile Write Cycle Time: 3ms
• High Reliability
    —100,000 Endurance Cycles
    —Guaranteed Data Retention: 100 Years
• Small Package Options
    —8-Lead Mini-DIP Package
    —8, 14-Lead SOIC Packages
    —8, 20, 28-Lead TSSOP Packages
    —8-Lead XBGA Packages