1 Features
1• Integrated Shielded Inductor
• Simple PCB Layout
• Fixed Switching Frequency (350 kHz)
• Flexible Start-up Sequencing Using External Soft-
Start, Tracking and Precision Enable
• Protection Against Inrush Currents and Faults
Such as Input UVLO and Output Short Circuit
• Junction Temperature Range –40°C to 125°C
• Single Exposed Pad and Standard Pinout for Easy
Mounting and Manufacturing
• Fully Enabled for WEBENCH® Power Designer
• Pin Compatible With LMZ22010/08,
LMZ12010/08, LMZ23610/08/06H, and
LMZ13608/06H
• Performance Benefits
– High Efficiency Reduces System Heat
Generation
– Low Radiated Emissions (EMI) Tested to
EN55022 Class B Standard
– Only 7 External Components
– Low Output Voltage Ripple
– No External Heat Sink Required
• Electrical Specifications
– 50-W Maximum Total Output Power
– Up to 10-A Output Current
– Input Voltage Range 6 V to 36 V
– Output Voltage Range 0.8 V to 6 V
– Efficiency up to 92%
NOTE: EN 55022:2006, +A1:2007, FCC Part 15 Subpart B,
Tested on Evaluation Board with EMI Configuration

2 Applications
• Point-of-load Conversions from 12-V and 24-V
Input Rail
• Time-Critical Projects
• Space Constrained / High Thermal Requirement
Applications
• Negative Output Voltage Applications
(See AN-2027 SNVA425)

3 Description
The LMZ13610 SIMPLE SWITCHER® power module
is an easy-to-use step-down DC-DC solution capable
of driving up to 10-A load. The LMZ13610 is available
in an innovative package that enhances thermal
performance and allows for hand or machine
soldering.
The LMZ13610 can accept an input voltage rail
between 6 V and 36 V and can deliver an adjustable
and highly accurate output voltage as low as 0.8 V. The LMZ13610 only requires two external resistors
and three external capacitors to complete the power
solution. The LMZ13610 is a reliable and robust
design with the following protection features: thermal
shutdown, input undervoltage lockout, output over- voltage protection, short circuit protection, output
current limit, and allows start-up into a prebiased
output.