1. INTRODUCTION
TERMI-FOIL Hand Crimping Tool 68026 is designed
to crimp the tab end of TERMI-FOIL terminals and
splices (reference part numbers are listed in Figure 1)
onto foil with a maximum thickness of 0.76 mm
[.020 in.]. This tool is a member of the CERTI-CRIMP*
hand crimping tool family. The ratchet on these tools
ensures full crimping of the product. Once engaged,
the ratchet will not release until the handles have been
FULLY closed.

2. DESCRIPTION
The tool consists of two handles, a ratchet, and two
jaws each with a crimping die. The crimping dies have
flat faces which squeeze the lance-faced tab end of
the terminal or splice into the foil.
The dies bottom before the r