1 Features
• N-channel H-bridge motor driver
– MOSFET on-resistance: HS + LS 280 mΩ
– Drives one bidirectional brushed DC motor
– One single- or dual-coil latching relay
• 1.65-V to 11-V operating supply voltage range
• High output current capability: 4-A peak
• Standard PWM Interface (IN1/IN2)
• Supports 1.8-V, 3.3-V, and 5-V logic inputs
• Ultra low-power sleep mode
– <84.5 nA @ VVM = 5 V, VVCC = 3.3 V, TJ = 25°C
– Pin-to-pin with DRV8837 & DRV8837C
• Protection features
– Undervoltage lockout (UVLO)
– Overcurrent protection (OCP)
– Thermal shutdown (TSD)
• Family of devices. See Section 5 for details.
– DRV8210: 1.65-11 V, 1 Ω, multiple interfaces
– DRV8210P: Sleep pin, PWM interface
– DRV8212: 1.65-11 V, 280 mΩ, multiple
interfaces
– DRV8212P: Sleep pin, PWM interface
– DRV8220: 4.5-18 V, 1 Ω, multiple interfaces

2 Applications
• Brushed DC motor, solenoid, & relay driving
• Water, gas, & electricity meters
• IP network camera IR cut filter
• Video doorbell
• Machine vision camera
• Electronic smart lock
• Electronic and robotic toys
• Blood pressure monitors
• Infusion pumps
• Electric toothbrush
• Beauty & grooming

3 Description
The DRV8212P is an integrated motor driver with
four N-channel power FETs, charge pump regulator,
and protection circuitry. The tripler charge pump
architecture allows the device to operate down to 1.65
V to accommodate 1.8-V supply rails and low-battery
conditions. The charge pump integrates all capacitors
to reduce the overall solution size of the motor driver
on a PCB and allows for 100% duty cycle operation.
The DRV8212P supports an industry standard PWM
(IN1/IN2) control interface. The nSLEEP pin controls
a low-power sleep mode which achieves ultra-low
quiescent current draw by disabling the internal
circuitry.
The device can supply up to 4-A peak output current.
It operates with a supply voltage from 1.65 V to 5.5 V.
The driver offers robust internal protection features
include supply undervoltage lockout (UVLO), output
overcurrent (OCP), and device overtemperature
(TSD).
The DRV8212P is part of a family of devices which
come in pin-to-pin scalable RDS(on) and supply voltage
options to support various loads and supply rails
with minimal design changes. See Section 5 for
information on the devices in this family. View our full
portfolio of brushed motor drivers on ti.com.