DESCRIPTION
The MPM3683-10 is an easy-to-use, fully integrated, DC/DC step-down power module,
with 10A of continuous output current (IOUT). The MPM3683-10 integrates a DC/DC converter, power inductor, and passive components. It can deliver IOUT across a wide input voltage (VIN) supply range, with excellent load and line regulation.
The constant-on-time (COT) control scheme provides fast transient response and eases loop stabilization. The operating switching frequency fSW) can be easily set to 600kHz, 800kHz, or 1000kHz using the MODE configuration. This allows the MPM3683-10’s fSW to remain constant regardless of VIN and the output voltage (VOUT).
The MPM3683-10 features a configurable softstart time (tSS) with a capacitor. An open-drain power good (PG) signal indicates whether VOUT is within the nominal voltage range.
Fully integrated, non-latched protections include over-current protection (OCP), over-voltage protection (OVP), and over-temperature protection (OTP).
The MPM3683-10 is available in a compact FCM LGA-29 (7mmx7mmx4.4mm) package.

FEATURES
• Wide Input Voltage (VIN) Range
o 2.7V to 16V with External 3.3V Bias
o 4V to 16V with Internal Bias or External 3.3V Bias
• Output Voltage (VOUT) Range: 0.6V to 5.5V
• Differential VOUT Remote Sense
• Adaptive Constant-On-Time (COT) for Ultra-Fast Transient Response
• Stable with Zero-ESR Output Capacitor (COUT)
• Selectable Pulse-Skip Mode (PSM) or Forced Continuous Conduction Mode (FCCM)
• VOUT Tracking
• VOUT Discharge
• Power Good (PG) Active Clamped Low during Power Failure
• Configurable Soft-Start Time (tSS)
• Pre-Biased Start-Up
• Selectable Switching Frequency (fSW): 600kHz, 800kHz, and 1000kHz
• Non-Latch Over-Current Protection (OCP), Under-Voltage Lockout (UVLO), Thermal Shutdown, and Over-Voltage Protection (OVP)
• Available in an FCM LGA-29 (7mmx7mmx4.4mm) Package

APPLICATIONS
• Telecom and Networking Systems
• Base Stations
• Industrial Systems
• Servers and Storage
• FPGA and ASIC Cards