1 Features
• 4.5V to 60V operating voltage, 67V absolute
maximum
• Integrated 60V, 31mΩ RON hot-swap FET
• Reverse polarity protection and reverse current
blocking support with an external N-channel FET
• 0.6A to 6A adjustable current limit (±7%)
• Electrical fast transients (IEC61000-4-4) immunity
and load protection during surge (IEC 61000-4-5)
with Class-A system performance
• Fast reverse current blocking (0.17μs)
• Variants with adjustable output power limiting
(±6%)
• Adjustable UVLO, OVP cutoff, output slew rate
control for inrush current limiting
• Charges large and unknown capacitive loads
through thermal regulation during device power up
• Variants with 35V and 39V maximum overvoltage
clamp
• Power Good output (PGOOD)
• Selectable overcurrent fault response options
between auto-retry and latch-off (MODE)
• Variants with 2 times pulse overcurrent support
• Analog current monitor (IMON) output (±6%)
• UL 2367 recognized
– File No. E169910
– RILIM ≥ 3kΩ
• IEC 62368-1 certified

2 Applications
• Factory automation and control – PLC, DCS, HMI,
I/O modules, sensor hubs
• Motor drives – CNC, encoder supply
• Electronic circuit breakers

3 Description
The TPS2663x devices are easy to use, positive
60V and 6A eFuse with a 31mΩ integrated FET.
The device features a B-FET driver to control
an external N-channel FET in the system designs
that require protection from input reverse polarity
faults and reverse current blocking. The device
incorporates robust protection features that simplify
system designs requiring protection during system
tests like IEC61000-4-5 industrial surge tests. The
device features an adjustable output power limiting
(PLIM) functionality that simplifies the system design
requiring compliance in accordance to the standards
like IEC61010-1 and UL1310. Additional protection
features include adjustable overcurrent protection,
fast short-circuit protection, output slew rate control,
overvoltage protection, and undervoltage lockout.
For system status monitoring and downstream load
control, the device provides fault and a precise
current monitor output. PGOOD can be used for
enable and disable control of the downstream DCDC
converters. The MODE pin allows flexibility to
configure the device between the two current-limiting
fault responses (latch-off and auto-retry).