1 Features
• Available as an integrated-inductor power module:
TPSM8287A06, TPSM8287A10, TPSM8287A12,
TPSM8287A15
• Functional Safety-Capable
– Documentation available to aid functional safety
system design
• 2.7V to 6V input voltage range
• 6A, 9A, 12A, 15A pin-to-pin device family
• Four output voltage ranges:
– 0.4V to 0.71875V in 1.25mV steps
– 0.4V to 1.0375V in 2.5mV steps
– 0.4V to 1.675V in 5mV steps
– 0.8V to 3.35V in 10mV steps
• Output voltage accuracy ±1%
• Differential remote sensing
• 7mΩ and 4.5mΩ internal power MOSFETs
• Adjustable external compensation
• Power-save or forced-PWM operation
• Optional synchronization to external clock or
spread-spectrum operation
• I2C-compatible interface up to 1MHz
• Stackable for increased output current capability
• Thermal warning and thermal shutdown
• Active output discharge
• Power-good output with a window comparator
• Available in 2.55mm × 3.55mm × 1mm VQFN
package with wettable flanks
• –40°C to 125°C junction temperature, TJ

2 Applications
• Optical networks, storage
• FPGA, ASIC, and digital core supply
• DDR memory supply

3 Description
The TPS6287x is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with
differential remote sensing. For each current rating, there are full-featured device variants with I2C interface
and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use.
Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.
The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation
across multiple devices.
The TPS6287x family implements a fixed-frequency DCS-Control scheme that supports fast transients. The
devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient
performance and lowest output voltage ripple.
The remote sensing feature allows voltage regulation at the point-of-load, hence the device achieves better than
±1% DC voltage accuracy under all operating conditions.
The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to
1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.
The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring
and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption
of the load to the performance needs of the application through the I2C-compatible interface. The default start-up
voltage is resistor-selectable through the VSEL pin.