Features and benefits
• Narrow slots suitable for small-diameter wires
• Smooth, burr-free edges protect installers from injury and wires
from damage
• Fingers can be removed with no sharp edges at pre-notched
snap-off points
• Further pre-notched snap-off point at base of sidewall allow cutting
out and removing sections of sidewall with no sharp edges
• Raised mounting points for easily and securely fastening wire
retainers and other accessores prior to cabling
• Wire retainers and accessories leave no protruding parts below
surface of duct
• Duct covers are easy to mount and remove, yet hold securely even in
a vertical position and under vibration
• Cover is flush with side of duct, allowing for tight, contiguous
placement of ducts
• Additional retainer nub on fingers on ducts height 80 and above to
prevent cables from slipping
• Base perforation according to DIN EN 50085