Key Features:
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument
enclosure.
Two piece “tongue & groove” construction with a replaceable one-piece silicone rubber
gasket provides protection against access of dust and water. Gasket supplied loose
inside the enclosure (not pre-installed).
Gasket has a temperature rating of -40C to +150C
Ideal for repetitive opening and closing.
Four recessed stainless steel machine screws secure lid into tapped holes.
Easy to wall mount using “through box - blind hole” construction, outside of gasket
protection.
Lid screws are self captivating (lid holes are threaded with the first installation of lid
screws). (NOTE: Except for 1590Z060, 1590Z061, 1590Z062, and 1590Z063)
Designed to meet IP68.
North American Mark of Safety - cUL & UL listed. Certified to Type 4, 4X, 6, 6P.
All sizes except 1590Z060** carry an impact rating of IK08 per IEC62262
16ga galvanized steel inner panels are available for most sizes, and are sold separately
(refer to table below).
Painted versions are painted inside and out with a tough powder paint. Choice of textured
black or smooth gray (RAL 7001).
For non-metallic (glass reinforced polyester) versions of these enclosures, see series
1590ZGRP