GENERAL DESCRIPTION
The AD9230-11 is an 11-bit monolithic sampling analog-to-digital converter (ADC) optimized for high performance, low power, and ease of use. The product operates at up to a 200 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) amplifier and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES
   SNR = 62.5 dBFS @ fIN up to 70 MHz @ 200 MSPS
   ENOB of 10.2 @ fIN up to 70 MHz @ 200 MSPS (−1.0 dBFS)
   SFDR = −77 dBc @ fIN up to 70 MHz @ 200 MSPS (−1.0 dBFS)
   Excellent linearity
      DNL = ±0.15 LSB typical
      INL = ±0.5 LSB typical
   LVDS at 200 MSPS (ANSI-644 levels)
   700 MHz full power analog bandwidth
   On-chip reference, no external decoupling required
   Integrated input buffer and track-and-hold amplifier
   Low power dissipation
      373 mW @ 200 MSPS (LVDS SDR mode)
      328 mW @ 200 MSPS (LVDS DDR mode)
   Programmable input voltage range
      1.0 V to 1.5 V, 1.25 V nominal
   1.8 V analog and digital supply operation
   Selectable output data format (offset binary, twos
      complement, gray code)
   Clock duty cycle stabilizer
   Integrated data capture clock
  
APPLICATIONS
   Wireless and wired broadband communications
   Cable reverse path
   Communications test equipment
   Radar and satellite subsystems
   Power amplifier linearization