General Description
The CS2300-CP is an extremely versatile system clocking device that utilizes a programmable phase lock loop. The CS2300-CP is based on a hybrid analog-digital PLL architecture comprised of a unique combination of a Delta-Sigma Fractional-N Frequency Synthesizer and a Digital PLL. This architecture allows for generation of a low-jitter clock relative to an external noisy synchronization clock at frequencies as low as 50 Hz. The CS2300-CP supports both I²C and SPI for full software control.

Features
♦ Clock Multiplier / Jitter Reduction
    – Generates a Low Jitter 6 - 75 MHz Clock from a Jittery or Intermittent 50 Hz to 30 MHz Clock Source
♦ Internal LC Oscillator for Timing Reference
♦ Highly Accurate PLL Multiplication Factor
    – Maximum Error less than 1 PPM in High Resolution Mode
♦ I²C™ / SPI™ Control Port
♦ Configurable Auxiliary Output
♦ Minimal Board Space Required
    – No External Analog Loop-filter Components