4CH LOW INPUT ACTIVE HIGH−CURRENT DARLINGTON SINK DRIVER

The TD62318AP and TD62318AF are non-inverting transistor arrays which are comprised of four NPN darlington output stages and PNP input stages.
These devices can be operated by source input voltage and are suitable for operation with a 5−V general pourposed logic IC such as TTL, 5−V CMOS and 5−V Microprocessor which have sink current output drivers.
Applications include relay, hammer, lamp and stepping moter drivers.
Please observe the thermal condition for using.

FEATURES
● Output current (single output) 700 mA (Max)
● High sustaining voltage output 50 V (Min)
● Output clamp diodes
● Input compatible with TTL and 5−V CMOS
● Low level active inputs
● Standard supply voltage
● Two VCC terminals VCC1, VCC2 (separated)
● GND and SUB terminal = heat sink
● Package type-AP: DIP-16 pin
● Package type-AF: HSOP-16 pin