Description
The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut-off current delay time, and restart delay are programmable. Cut-off current and cut-off current delay time, combined with thermal shutdown and automatic restart, protect the device against overload and short-circuit.

Features
• Supply voltage from 18 V to 32.5 V
• Programmable output stages: high-side, low-side or push-pull (< 2 Ω)
• Up to 500 mA L+ protected high-side driver
• COM1, COM2 and COM3 mode supported
• Additional IEC61131-2 type 1 input
• Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
• 3.3 V / 5 V, 50 mA linear regulator
• 5 mA IO-Link digital input
• Fast mode I2C for IC control, configuration and diagnostic
• Diagnostic dual LED sequence generator and driver
• 5 V and 3.3 V compatible I/Os
• Overvoltage protection (> 36 V)
• Overtemperature protection
• ESD protection
• Miniaturized VFQFPN 26L (3.5x5x1 mm) package

Applications
• Industrial sensors
• Factory automation
• Process control