Description
The CXP82316/82320/82324 microcomputer is composed of a CPU, ROM and RAM, and I/O ports. These chips feature many other high-performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time base timer, capture timer/counter, fluorescent display controller/driver, remote control receiver.
This device also includes a power-on reset function and sleep/stop functions which can be used to achieve low power consumption.

Features
• Instruction set which supports a wide array of data types
    — 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and boolean bit operations.
• Minimum instruction cycle 400ns for 10MHz operation
• On-chip ROM 16K bytes (CXP82316)
    20K bytes (CXP82320)
    24K bytes (CXP82324)
• On-chip RAM 704 bytes (Including fluorescent display data area)
• Peripheral functions:
    — A/D converter 8-bit, 8-channel, successive approximation system (conversion rate 32µs/10MHz)
    — Serial interface On-chip 8-bit, 8-stage FIFO (1 to 8 bytes auto transfer) 1 channel
                                  8-bit clock synchronized 1 channel
    — Timers 8-bit timer
                    8-bit timer/counter
                    19-bit time-base timer
                    16-bit capture timer/counter
    — Fluorescent display controller/driver
                     Maximum of 336 segment display available
                     1 to 16 digits dynamic display
                     Dimmer function
                     High voltage tolerant output (40V)
                     On-chip pull-down resistor (Mask option)
    — Remote control receiver circuit
                          On-chip noise elimination circuit
                          On-chip 6 stage FIFO 8-bit pulse measurement counter
• Interrupts 14 factors, 15 vectors multi-interruption possible
• Standby mode Sleep/stop
• Package 80-pin plastic QFP
• Piggyback/evaluator CXP82300 80-pin ceramic QFP