|
Description The CXP825P40 is a highly integrated CMOS 8-bit single chip microcomputer which is mainly composed of an 8-bit CPU, PROM, RAM, and I/O ports. This microcomputer features many other high-performance circuits in a single chip CMOS design, including an A/D converter, serial interface, timer/counter, time base timer, capture timer/counter, fluorescent display tube controller/driver, remote control receiver. Also, the CXP825P40 provides the power-on reset function as well as the sleep/stop function which assures reduced power consumption. Features • Instruction set which supports a wide array of data types 213 types — 16-bit arithmetic instruction/multiplication and division instructions/boolean bit operation instruction • Minimum instruction cycle During operation 400ns/10MHz • Incorporated PROM capacity 40K bytes • Incorporated RAM capacity 1120 bytes (Including the fluorescent display data area) • Peripheral functions — A/D converter 8-bit, 8-channel, successive comparison type (conversion time: 32µs at 10MHz) — Serial interface 1-channel data interface with an 8-bit, 8-stage FIFO (1 to 8 bytes automatic transfer) 1 channel, 8-bit clock synchronized interface — Timers 8-bit timer 8-bit timer/counter 19-bit time-base timer 16-bit capture timer/counter — Fluorescent display tube controller/driver Display of up to 336 segments 1 to 16 digits dynamic display Dimmer function High voltage tolerance output (40V) Built-in pull-down resistor — Remote control receiver Built-in noise suppressor circuit Built-in 8-bit pulse counter and 6-stage FIFO • Interrupts 14 factors, 15 vectors, multiple interrupt processing • Standby mode Sleep/stop • Package 80-pin plastic QFP
|