Description

These dual channel optocoup lers contain a pair of light emitting diodes and integrated photo-detec tors with electrical insulation between input and output. Separate connection for the photodiode bias and output transistor collectors increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

These dual channel optocouplers are available in an 8 Pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8 Pin DIP part number and the electrically equivalent SO-8 part number.

Features

• 15 kV/μs minimum common mode transient immunity at VCM = 1500 V (HCPL-4534/0534)

• TTL compatible

• Available in 8 pin DIP, SO-8, and 8 pin DIP – gull wing surface mount (option 020) packages

• High density packaging

• 3 MHz bandwidth

• Open collector outputs

• Safety approval

   UL Recognized – 3750 V rms for 1 minute (5000 V rms

   for 1 minute for Option 020) per UL1577

   CSA Approved

   IEC/EN/DIN EN 60747-5-2

   – VIORM = 630 Vpeak for HCPL-2530/2531/4534 0ption 060

   – VIORM = 560 Vpeak for HCPL-0530/0531/0534 0ption 060

• Single channel version available (4502/3, 0452/3)

• MIL-PRF-38534 hermetic version available

   (55XX/65XX/4N55)

Applications

• Line receivers – high common mode transient immunity (>1000 V/μs) and low input-output capacitance (0.6 pF)

• High speed logic ground isolation – TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL

• Replace pulse transformers – save board space and weight

• Analog signal ground isolation – integrated photon detector provides improved linearity over phototran sistor type

• Polarity sensing

• Isolated analog amplifer – dual channel packaging enhances thermal tracking