Description
Pericom Semiconductor’s PI3C3245 is a 2.5 volt or 3.3 volt 8-bit, 2-port bus switch designed with a low On-Resistance (5-ohm) allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. It is very useful in switching signals that have high bandwidth (>400 MHz).

Features
• Near-Zero propagation delay
• 5-ohm switches connect inputs to outputs
• High Bandwidth Operation (>400 MHz)
• Permits Hot Insertion
• 5V I/O Tolerant
• Rail-to-Rail 3.3V or 2.5V Switching
• 2.5V Supply Voltage Operation
• Packaging (Pb-free & Green available):
    – 20-pin 150 mil wide plastic QSOP (Q)
    – 20-pin 173 mil wide plastic TSSOP (L)