■ DESCRIPTION
The MBM30LV0128 device is a single 3.3 V 16 M × 8 bit NAND flash memory organized as 528 byte × 32 pages × 1024 blocks. Each 528 byte page contains 16 bytes of optionally selected spare area which may be used to store ECC code (Specifications indicated are on condition that ECC system would be combined) . Program and read data is transferred between the memory array and page register in 528 byte increments. A 528 byte page can be programmed in 200 µs and an 16 K byte block can be erased in 2 ms under typical conditions. An internal controller automates all programs and erases operations including the verification of data margins.

■ FEATURES
• 3.3 V-only operating voltage (2.7 V to 3.6 V)
    Minimizes system level power requirements
• Organization
    Memory Cell Array : (16 M + 512 K) × 8 bit
    Data Register : (512 + 16) × 8 bit
• Automatic Program and Erase
    Page Program : (512 + 16) Byte
    Block Erase : (16 K + 512) Byte
• 528 Byte Page Read Operation
    Random Access : 10 µs (Max.)
    Serial Access : 35 ns (Max.)
• Fast Program and Erase
    Program Time : 200 µs (Typ.) / page
    Block Erase Time : 2 ms (Typ.) / block
• Command/Address/Data Multiplexed I/O Port
• Hardware Data Protection
• 1,000,000 write/erase cycles guaranteed (ECC system required)
• Command Register Operation
• Package
    48-pin TSOP Type I (0.5 mm pitch)
    Normal/Reverse Type
• Data Retention : 10 years