DESCRIPTION:
The 16-Bit Buffer/Line Driver is for bus interface or signal buffering applications requiring high speed and low power dissipation. These devices have a flow through pin organization, and shrink packaging to simplify board layout. All inputs are designed with hysteresis for improved noise margin. The three-state controls allow independent 4-bit, 8-bit or combined 16-bit operation. These parts are plug in replacements for 54/74ABT16244 where higher speed, lower noise or lower power dissipation levels are desired.

FEATURES:
• Common features:
    – 0.5 MICRON CMOS Technology
    – High-speed, low-power CMOS replacement for ABT functions
    – Typical tSK(o) (Output Skew) < 250ps
    – Low input and output leakage ≤ 1µA (max.)
    – ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
    – Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
    – Extended commercial range of -40°C to +85°C
• Features for FCT16244T/AT/CT/ET:
    – High drive outputs (-32mA IOH, 64mA IOL)
    – Power off disable outputs permit “live insertion”
    – Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V, TA = 25°C
• Features for FCT162244T/AT/CT/ET:
    – Balanced Output Drivers: ±24mA (commercial), ±16mA (military)
    – Reduced system switching noise
    – Typical VOLP (Output Ground Bounce) < 0.6V at VCC = 5V,TA = 25°C
• Features for FCT166244T/AT/CT:
    – Light Drive Balanced Output: ±8mA (commercial), ±6mA (military)
    – Minimal system switching noise
    – Typical VOLP (Output Ground Bounce) < 0.25V at VCC = 5V,TA = 25°C
• Features for FCT162H244T/AT/CT/ET:
    – Bus-Hold retains last active bus state during 3-state
    – Eliminates the need for external pull up resistors