The HA-5004 current feedback amplifier is a video/wideband amplifier optimized for low gain applications. The design is based on current-mode feedback which allows the amplifier to achieve higher closed loop bandwidth than voltage-mode feedback operational amplifiers. Since feedback is employed, the HA-5004 can offer better gain accuracy and lower distortion than open loop buffers. Unlike conventional op amps, the bandwidth and rise time of the HA-5004 are nearly independent of closed loop gain. The 100MHz bandwidth at unity gain reduces to only 65MHz at a gain of 10. The HA-5004 may be used in place of a conventional op amp with a significant improvement in speed power product.

Features
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200V/µs
• Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100mA
• Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±9V into 100Ω
• VSUPPLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5V to ±18V
• Thermal Overload Protection and Output Flag
• Bandwidth Nearly Independent of Gain
• Output Enable/Disable

Applications
• Unity Gain Video/Wideband Buffer
• Video Gain Block
• High Speed Peak Detector
• Fiber Optic Transmitters
• Zero Insertion Loss Transmission Line Drivers
• Current to Voltage Converter
• Radar Systems