General Description
The MAX1201 is a 14-bit, monolithic, analog-to-digital converter (ADC) capable of conversion rates up to 2.2Msps. This integrated circuit, built on a CMOS process, uses a fully differential, pipelined architecture with digital error correction and a short self-calibration procedure that corrects for capacitor and gain mismatches and ensures 14-bit linearity at full sample rates. An on-chip track-and-hold (T/H) maintains superb dynamic performance up to the Nyquist frequency. The MAX1201 operates from a single +5V supply.

Features
♦ Monolithic 14-Bit, 2.2Msps ADC
♦ Signal-to-Noise Ratio of 83dB
♦ Spurious-Free Dynamic Range of 91dB
♦ Differential Nonlinearity Error: ±0.3LSB
♦ Integral Nonlinearity Error: ±1.2LSB
♦ Single +5V Analog Supply, +3V Digital Supply
♦ Low Power Dissipation: 269mW
♦ On-Demand Self-Calibration
♦ Three-State, Two’s Complement Output Data

Applications
    xDSL
    Instrumentation
    Medical Imaging
    Scanners
    IR Imaging
    Spectrum Analysis