General Description

The MAX6351–MAX6360 microprocessor (µP) supervisors with multiple reset voltages significantly improve system reliability and accuracy compared to separate ICs or discrete components. If any input supply voltage drops below its associated preset threshold, all reset outputs are asserted. In addition, the output(s) is valid as long as either input supply voltage remains greater than +1.0V.

Features

♦ Precision Monitoring of Multiple +2.5V, +3.0V, +3.3V, and +5V Power-Supply Voltages

♦ Precision Factory-Set Power-Supply Reset Thresholds

♦ 20µA Supply Current

♦ 100ms min Power-On Reset Pulse Width

♦ Fully Guaranteed Over Temperature

♦ Guaranteed RESET Valid to VCC5 = 1V or VCC3 = 1V

♦ Power-Supply Transient Immunity

♦ No External Components for Dual-Voltage Systems

♦ Small 5- and 6-Pin SOT23 Packages

♦ Debounced TTL/CMOS-Compatible Manual-Reset Input

♦ Watchdog Timer 46.4sec Start-Up Timeout 2.9sec Normal Timeout

♦ Low Cost

Applications

Computers

 Intelligent Instruments

Controllers

Multivoltage Systems

Portable/Battery-Powered Equipment