0100Y-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. BNC Male to Straight Cut Lead Cable Using RG223 Coax In 100 CM Length., Radio frequency assembly BNC male to straight cut lead cable using RG223 coax in 100 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable using RG223 coax in 100 cm length, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This BNC to straight cut lead cable is a male to sexless coax assembly, PE3560-100CM, can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. BNC plug to straight cut lead sexless cable assembly PE3560-100CM is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3560-100CM can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to straight cut lead cable using RG223 coax in 100 cm length.

1 : $34.39
25 : $32.67
50 : $30.95
100 : $29.58

6,291

PE3C5030-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female Bulkhead to Reverse Polarity SMA Male Right Angle Cable 100 CM Length Using RG400 Coax., Radio frequency assembly N female bulkhead to reverse polarity SMA male right angle cable 100 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to reverse polarity SMA male right angle cable 100 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type bulkhead cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our type N to right angle reverse polarity SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to reverse polarity SMA cable is a female to male coax assembly, PE3C5030-100CM, can also be known as a N type jack to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to reverse polarity SMA plug cable assembly PE3C5030-100CM is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type female bulkhead to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5030-100CM can also be used in the other direction and will be right angle reverse polarity SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to reverse polarity SMA male right angle cable 100 cm length using RG400 coax.

1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67

565

PE3C5980-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Female Cable 100 cm Length Using RG141 Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA female cable 100 cm length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA female cable 100 cm length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to female coax assembly, PE3C5980-100CM, can also be known as a reverse polarity SMA plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA jack cable assembly PE3C5980-100CM is built with RG141 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency reverse polarity SMA male to reverse polarity SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5980-100CM can also be used in the other direction and will be reverse polarity SMA female to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to SMA reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA female cable 100 cm length using RG141 coax.

1 : $127.99
25 : $121.59
50 : $115.19
100 : $110.07

155

PE3C7720-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 10-32 Male Right Angle to Push-On SMP Female Flexible Cable 100 CM Length Using RG178 Coax., Radio frequency assembly 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to SMP cable assembly orders will ship same day as well. Pasternack RF coax flexible cable assembly is built with right angle 10-32 cable connection on one end and SMP cable connection on the other. Our flexible right angle 10-32 to SMP cable assemblies have a male gender on end 1 and female on end 2. This 10-32 to SMP cable is a male to female coax assembly, PE3C7720-100CM, can also be known as a flexible right angle 10-32 plug to SMP jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to SMP jack cable assembly PE3C7720-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 10-32 right angle male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7720-100CM can also be used in the other direction and will be SMP female to right angle 10-32 male cable assembly if the opposite connectivity is required. Flexible 10-32 right angle plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMP cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax.

1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09

PE3C7980-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.2-5, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 2.2-5 Male to 2.2-5 Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to 2.2-5 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to 2.2-5 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 2.2-5 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 2.2-5 cable connection on the other. Our low PIM 2.2-5 to 2.2-5 cable assembly has a male gender on end 1 and a male on end 2. PE3C7980-100CM can also be known as a low PIM 2.2-5 plug to 2.2-5 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.65-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 2.2-5 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7980-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to 2.2-5 male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7980-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 2.2-5 plug to 2.2-5 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 2.2-5 low PIM RF cable assembly as per your requirements.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3C8510-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using SPO-250 Coax Using Times Microwave Parts in 100 CM., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male right angle cable using SPO-250 coax using Times Microwave parts in 100 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male right angle cable using SPO-250 coax using Times Microwave parts in 100 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C8510-100CM, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C8510-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8510-100CM can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male right angle cable using SPO-250 coax using Times Microwave parts in 100 CM.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

PE3W08060-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 3.5mm Female to 2.92mm Male Cable 100 cm Using PE-SR402AL Coax., Radio frequency assembly 3.5mm female to 2.92mm male cable 100 cm using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to 2.92mm male cable 100 cm using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 2.92mm cable connection on the other. Our 3.5mm to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. This 3.5mm to 2.92mm cable is a female to male coax assembly, PE3W08060-100CM, can also be known as a 3.5mm jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 2.92mm plug cable assembly PE3W08060-100CM is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 36 GHz maximum frequency 3.5mm female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08060-100CM can also be used in the other direction and will be 2.92mm male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to 2.92mm male cable 100 cm using PE-SR402AL coax.

1 : $277.99
25 : $264.09
50 : $250.19
100 : $239.07

PE3C0406/PH270-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to MMCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to MMCX plug right angle low loss cable 100 cm length using LMR-100 coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MMCX plug right angle low loss cable 100 cm length using LMR-100 coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C0406/PH270-100CM can also be known as a low loss right angle SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0406/PH270-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C0406/PH270-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0406/PH270-100CM can also be used in the other direction and will be a right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $77.99
25 : $74.09
50 : $70.19
100 : $67.07

PE3C7630-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE3C7630-100CM can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C7630-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7630-100CM can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W01005/HS

Pasternack Enterprises

PE3W10100-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Female to 7/16 DIN Female Low Loss Cable 36 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN female to 7/16 DIN female low loss cable 36 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN female to 7/16 DIN female low loss cable 36 inch length using LMR-400-UF coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. PE3W10100-36 can also be known as a low loss 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to 7/16 DIN jack cable assembly PE3W10100-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN female to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN jack to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN female to 7/16 DIN female low loss cable 36 inch length using LMR-400-UF coax.

1 : $335.99
25 : $319.19
50 : $302.39
100 : $288.95

PE3C8240-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.1/9.5 Mini DIN Male to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle N type cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to type N cable is a male to male coax assembly, PE3C8240-100CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to N type plug cable assembly PE3C8240-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8240-100CM can also be used in the other direction and will be right angle type N male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to N male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components.

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

PE3W10100-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. 7/16 DIN Female to 7/16 DIN Female Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN female to 7/16 DIN female low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN female to 7/16 DIN female low loss cable 300 inch length using LMR-400-UF coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. PE3W10100-300 can also be known as a low loss 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to 7/16 DIN jack cable assembly PE3W10100-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN female to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN jack to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN female to 7/16 DIN female low loss cable 300 inch length using LMR-400-UF coax.

1 : $405.99
25 : $385.69
50 : $365.39
100 : $349.15

PE3W13910-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to Push-On SMP Female Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male right angle to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to push-on SMP female right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our low loss right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W13910-100CM can also be known as a low loss right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13910-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W13910-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13910-100CM can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $49.19
25 : $46.73
50 : $44.27
100 : $42.3

PE3W02390-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity SMA Male Right Angle to N Male Right Angle Cable 100 CM Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA male right angle to N male right angle cable 100 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity SMA male right angle to N male right angle cable 100 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss right angle reverse polarity SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to N type cable is a male to male coax assembly, PE3W02390-100CM, can also be known as a low loss right angle reverse polarity SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W02390-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02390-100CM can also be used in the other direction and will be right angle N type male to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male right angle to N male right angle cable 100 cm length using LMR-195 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

3560100RJT

TE Connectivity

3560 100R 5% Resistance Value: 100 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 6 W Surface Mount Resistor | 100 Ω Thick Metal Film Power Resistor 5 % | Part Number: 3560100RJT | Internal Number: 9-2176407-5 | TE Connectivity
RoHS : Compliant

1,000 : $1.92
500 : $1.98
250 : $2.04
100 : $2.09
50 : $2.15
25 : $2.21
10 : $2.27
1 : $2.33

1,953

T2010042101-000

TE Connectivity

HA-004-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 4+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 4+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010042101-000 | Internal Number: T2010042101-000 | TE Connectivity
RoHS : Compliant

50 : $10.0
25 : $10.59
10 : $11.17
1 : $11.76

511

T2010042201-000

TE Connectivity

HA-004-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 4+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 4+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010042201-000 | Internal Number: T2010042201-000 | TE Connectivity
RoHS : Compliant

50 : $10.47
25 : $11.09
10 : $11.71
1 : $12.32

167

T2010043201-000

TE Connectivity

HA-004-FS Contact Type: Socket Pole Configuration: 4+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Contact Current Rating (Max): 10 A Socket 4+PE 14 – 20 AWG .5 – 2.5 mm² | Rectangular Contact Insert | Part Number: T2010043201-000 | Internal Number: T2010043201-000 | TE Connectivity
RoHS : Compliant

50 : $15.93
25 : $16.87
10 : $17.8
1 : $18.74

135

FX1901-0001-0050-L

TE Connectivity

FX1901-0001-0050-L Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 50 lbf Operating Temperature Range: 0 – 50 °C Operating Temperature Range: 32 – 122 °F OEM Compression Load Cells | Compression Load Cell 10 - 200 Lbf | Part Number: FX1901-0001-0050-L | Internal Number: FX1901-0001-0050-L | TE Connectivity
RoHS : Compliant

1 : $44.0

129

T2010033201-000

TE Connectivity

HA-003-FS Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 3 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 3 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010033201-000 | Internal Number: T2010033201-000 | TE Connectivity
RoHS : Compliant

250 : $12.04
100 : $12.52
50 : $13.0
25 : $13.49
10 : $13.97
1 : $14.45

MTCC1P-010-010-01

TE Connectivity

MTCC1P-010-010-01 Connector & Housing Type: Plug Connector Product Type: Housing Assembly Mating Alignment: Without Mating Retention: With Mating Retention Type: Retainer Clip Plug Housing Assembly Without | Standard Rectangular Connector | Part Number: MTCC1P-010-010-01 | Internal Number: 364283-000 | Alias Number: 2-1192731-8 | TE Connectivity
RoHS : Compliant

1 : $148.91

FN2060-10-08

TE Connectivity

FN2060-10-08 Current Rating: 10 A Input Termination Type: Threaded Stud Output Termination Type: Threaded Stud Leakage Current (Max) (120VAC, 60Hz): .38 mA Leakage Current (Max) (250VAC, 50Hz): .66 mA High Performance Single Phase Filters Fn2060 & Multi Stage General Purpose Ac/dc Emc/rfi Filter | 10 A Threaded Stud .38 mA | Part Number: FN2060-10-08 | Internal Number: 817248-SF | FN2060-10-08 Current Rating: 10 A Input Termination Type: Threaded Stud Output Termination Type: Threaded Stud Leakage Current (Max) (120VAC, 60Hz): .38 mA Leakage Current (Max) (250VAC, 50Hz): .66 mA High Performance Single Phase Filters Fn2060 & Multi Stage General Purpose Ac/dc Emc/rfi Filter | 10 A Threaded Stud .38 mA | Part# FN2060-10-08
RoHS : Compliant

25 : $87.06
10 : $93.76
1 : $100.46

T2010032201-000

TE Connectivity

HA-003-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 3+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 3+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010032201-000 | Internal Number: T2010032201-000 | TE Connectivity
RoHS : Compliant

50 : $11.46
25 : $12.13
10 : $12.8
1 : $13.48

T2010043101-000

TE Connectivity

HA-004-MS Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 4+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 4+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010043101-000 | Internal Number: T2010043101-000 | TE Connectivity
RoHS : Compliant

50 : $15.93
25 : $16.87
10 : $17.8
1 : $18.74

CSTA263NN00440001000

TE Connectivity

940 PLUG Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 6 Circular Connector Shell Size: 40 Sealable: No Cable-to-Cable Circular Connector Plug 6 40 | Standard Circular Connector | Part Number: CSTA263NN00440001000 | Internal Number: CSA263N00440001000 | TE Connectivity
RoHS : Compliant

10 : $119.33
1 : $132.59

T2010032101-000

TE Connectivity

HA-003-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 3+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 3+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010032101-000 | Internal Number: T2010032101-000 | TE Connectivity
RoHS : Compliant

50 : $9.92
25 : $10.5
10 : $11.09
1 : $11.67

EEGA201NN00000501000

TE Connectivity

915 ITEC RECEPTACLE Number of Positions: 12 Connector Product Type: Connector Assembly Operating Voltage: 630 VDC 63 VDC Connector System: Cable-to-Panel Sealable: No Circular Power Connector | 12 Connector Assembly 630 VDC Cable-to-Panel | Part Number: EEGA201NN00000501000 | Internal Number: EEA201N00000501000 | TE Connectivity
RoHS : Compliant

25 : $30.56
10 : $32.91
1 : $35.26

T2010033101-000

TE Connectivity

HA-003-MS Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 3 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 3 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010033101-000 | Internal Number: T2010033101-000 | TE Connectivity
RoHS : Compliant

50 : $13.09
25 : $13.86
10 : $14.63
1 : $15.4

T1010062101-000

TE Connectivity

H6B-KDBM Connector Cover Type: Protective Cover Primary Product Color: Gray Primary Product Material: Die Cast Zinc Alloy Operating Temperature (Max): 125 °C Operating Temperature (Max): 257 °F Protective Cover Gray | Connector Cap & Cover | Part Number: T1010062101-000 | Internal Number: T1010062101-000 | Die Cast Zinc Alloy | TE Connectivity
RoHS : Compliant

50 : $14.58
25 : $15.44
10 : $16.29
1 : $17.15

Teledyne HiRel

M38510/01001BFA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

M38510/01001BEA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

Waytek, Inc.

50100

Hillsdale Terminal & Tool Inc

Vinyl Ring Terminal 16-14 Gauge, #10 Stud

100 : $0.0776
200 : $0.0704
500 : $0.0629
1,000 : $0.0571
5,000 : $0.0544

7,001

5701000BK0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $15.14
10 : $13.08
50 : $11.87
100 : $10.89
500 : $10.26

2,711

640067.01.003

Kalas Wire & Cable

2 GA EPDM Red Welding Cable 624/.010 Stranding 250' Spool -50C to 105C

250 : $3.6033
1,000 : $3.1867

1,750

4201000OR00R2

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a 1.000" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $1.7448
500 : $1.5975

600

5701000RD0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is red adhesive-lined polyolefin tubing with a 1.000" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $12.68
10 : $10.93
50 : $9.95
100 : $9.09
500 : $8.61

486

171-S0-100-2

100A Auto Reset 1/4" Studs Surface Mount Circuit Breaker HI AMP TYPE I 46935

1 : $24.27
5 : $21.66
10 : $20.3
50 : $19.17
100 : $18.26
200 : $17.35

159

V8D2S001-00000-000

Carling Technologies

V-Series Rocker Switch Body, SPDT, (ON)-OFF-(ON), 20A, 12VDC, Non-Illumination
RoHS : Compliant

1 : $13.2061
10 : $11.7512
20 : $11.6393
50 : $10.7999
100 : $10.4641
200 : $10.1844

V4D2S001-00000-000

Carling Technologies

V-Series Rocker Switch Body, SPDT, ON-NONE-ON, 20A, 12VDC, Non-Illumination
RoHS : Compliant

1 : $12.1423
10 : $10.8041
20 : $10.7016
50 : $9.9299
100 : $9.6213
200 : $9.3639

171-P0-100-2

100A Automatic Reset 1/4" Stud Panel Mount Circuit Breaker

1 : $24.75
5 : $22.09
10 : $20.7
50 : $19.55
100 : $18.62
200 : $17.7

V2D2AN01-00000-000

Carling Technologies

V-Series Rocker Switch Body, SPST-NO, OFF-(ON), 20A, 12VDC Illumination LED Amber

1 : $15.3738
10 : $14.771
20 : $14.3941
50 : $14.1681
100 : $13.1884
200 : $12.3594

V2D2AT01-00000-000

Carling Technologies

V-Series Rocker Switch Body, SPST-NO, OFF-(ON), 20A, 12VDC Illum. Superbright Red LED

1 : $15.7937
10 : $15.1743
20 : $14.7872
50 : $14.555
100 : $13.5485
200 : $12.6969

V4D2A601-00000-000

Carling Technologies

V-Series Rocker Switch Body, SPDT, ON-NONE-ON, 20A, 12VDC Illumination-Incandescent

1 : $16.2821
10 : $14.4883
20 : $14.3503
50 : $13.3155
100 : $12.9015
200 : $12.5565

211010-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211010-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69

0343401001

The Bosch Group

Glow-plug Starter Switch, 100A at 24V

1 : $178.51
5 : $171.39
10 : $164.29
25 : $154.53

64003-0100

Molex

Hand Crimp Tool Non-insulated Terminals 22-10 Ga
RoHS : Not Compliant

1 : $630.25
10 : $592.69

Win Source Electronics

SESD0402X1BN-0010-098

Littelfuse Inc

TVS DIODE 7VWM 10VC 0402
RoHS : Compliant

11,075 : $0.0271
8,280 : $0.0302
6,415 : $0.0312
4,645 : $0.0323
3,005 : $0.0333
1,235 : $0.0406

100,000

DA2J10100L

Panasonic Electronic Components

Rectifier Diode Switching 80V 0.1A 3ns 2-Pin SMini2-F5-B T/R / DIODE GEN PURP 80V 100MA SMINI2
RoHS : Compliant

7,675 : $0.0438
5,725 : $0.0489
4,425 : $0.0506
3,215 : $0.0523
2,075 : $0.054
855 : $0.0657

95,215

IRLML0100

Guangdong Kexin Industrial Co Ltd

N-Channel MOSFET

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

75,300

TPSC107M010R0100

Kyocera AVX Components

CAP TANT 100UF 20% 10V 2312
RoHS : Compliant

1,090 : $0.3084
875 : $0.321
675 : $0.3335
470 : $0.3586
305 : $0.3712
145 : $0.3963

60,000

DF40HC(3.0)-100DS-0.4V(55

Hirose Electric Co Ltd

CONN RECEPTACLE SMD

280 : $1.0752
210 : $1.1993
165 : $1.2407
120 : $1.282
80 : $1.3234
35 : $1.6128

47,670

DF40HC(3.0)-100DS-0.4V(58)

Hirose Electric Co Ltd

RoHS : Compliant

162 : $1.8567
121 : $2.0709
94 : $2.1423
68 : $2.2137
44 : $2.2851
18 : $2.785

47,630

HCPL-0601-000E

Broadcom Limited

OPTOISO 3.75KV OPN COLLECTOR 8SO
RoHS : Compliant

815 : $0.37
650 : $0.385
500 : $0.4
350 : $0.4301
225 : $0.4452
110 : $0.4752

34,580

FSV10100V

Fairchild Semiconductor Corporation

DIODE SCHOTTKY 100V 10A TO277-3 / Diode Schottky 100V 10A 3-Pin(2+Tab) TO-277 T/R
RoHS : Compliant

955 : $0.3522
765 : $0.3666
590 : $0.3808
415 : $0.4095
265 : $0.4238
125 : $0.4525

33,680

TPSE477K010R0100

Kyocera AVX Components

CAP TANT 470UF 10V 10% 2917
RoHS : Compliant

181 : $1.6625
135 : $1.8543
105 : $1.9183
76 : $1.9822
49 : $2.0462
21 : $2.4937

30,000

VB40100C-E3/8W

Vishay Huntington

DIODE ARRAY SCHOTTKY 100V TO263

325 : $1.0432
245 : $1.1636
190 : $1.2037
140 : $1.2438
90 : $1.2839
40 : $1.5648

23,117

SRR1260-100M

Bourns Inc

FIXED IND 10UH 5.5A 20 MOHM SMD
RoHS : Compliant

560 : $0.5366
420 : $0.5985
325 : $0.6191
235 : $0.6398
155 : $0.6604
65 : $0.8049

13,082

TPSE687K006R0100

Kyocera AVX Components

CAP TANT 680UF 10% 6.3V 2917 / 680 µF Molded Tantalum Capacitors 6.3 V 2917 (7343 Metric) 100mOhm
RoHS : Compliant

390 : $0.7786
290 : $0.8684
225 : $0.8983
165 : $0.9283
105 : $0.9582
45 : $1.1678

12,800

HCNW2201-000E

Broadcom Limited

OPTOISO 5KV PUSH PULL 8DIP
RoHS : Compliant

121 : $2.7835
91 : $3.1048
70 : $3.2118
51 : $3.3189
33 : $3.4259
14 : $4.1752

12,740

DA2S00100L

Panasonic Electronic Components

RF DIODE 40V 100MA SSMINI2
RoHS : Compliant

7,375 : $0.0407
5,510 : $0.0454
4,260 : $0.047
3,095 : $0.0485
2,000 : $0.0501
820 : $0.061

9,000

MBR60100CT

SMC Diode Solutions

Dual High-Voltage Schottky Rectifiers | DIODE ARRAY SCHOTTKY 100V TO220

770 : $0.391
575 : $0.4361
445 : $0.4512
325 : $0.4662
210 : $0.4813
90 : $0.5865

9,000

Wuhan P&S

V40100C-M3/4W

Vishay Intertechnologies

Dual High Voltage Trench MOS Barrier Schottky Rectifier
RoHS : Compliant

1 : $1.8
100 : $0.65
500 : $0.47
1,000 : $0.44

39,900

0100Y-R Reseller

Link URL