08WL-CB2-R Price, Reseller, Stock

AnywhereUSB 8 Plus with Wi-Fi, 8 port USB over IP Remote USB 3.1 Hub with 8 type A USB connectors, 100-240VAC Power, 10/100/1000/10G Ethernet, Wi-Fi, support for optional SFP+ module, and optional cel

1 : $2,250.0

Maritex

MLJ1608WR16JT000

TDK Corporation

SMD Inductors; MLJ1608WR16JT000; TDK; 160 nH; 25 MHz; 160 m?; 800 �m
RoHS : Compliant

4,000 : $0.037
1 : $0.053

13,942

RC-ML08W102JT

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x1k; 1/16W; 5%; 4x0603; 1206

5,000 : $0.004
2,500 : $0.006
500 : $0.007
1 : $0.008

13,310

RC-ML08W101JT

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x100R; 1/16W; 5%; 4x0603; 1206

5,000 : $0.005
2,500 : $0.007
500 : $0.009
1 : $0.009

9,300

RC-ML08W104JT

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x100k; 1/16W; 5%; 4x0603; 1206

5,000 : $0.005
2,500 : $0.007
500 : $0.009
1 : $0.009

8,770

M24C08-WDW6TP

STMicroelectronics

EEPROM (Electrically Erasable PROM); M24C08-WDW6TP; STMICROELECTRONICS; I2C; 400 kHz; EEPROM; 2.5 V
RoHS : Compliant

500 : $0.133
100 : $0.15
30 : $0.167
10 : $0.196
1 : $0.242

3,962

M24C08-WMN6TP

STMicroelectronics

EEPROM (Electrically Erasable PROM); M24C08-WMN6TP; STMICROELECTRONICS; I2C; 400 kHz; EEPROM; 2.5 V
RoHS : Compliant

5,000 : $0.13
2,500 : $0.142
500 : $0.167
150 : $0.21
50 : $0.248
5 : $0.345
1 : $1.079

2,365

SYS1308-1808-W2E-2.1

Sunny Electronics Corp

Power Supply; wall-mounted; 18W; 7.5V; 0-2.4A

20 : $9.556
10 : $10.292
5 : $10.66
1 : $11.026

ACC-FPC-08WPM-01R

Avalue Technology

Mounting kit FPC-08W

1 : $44.997

XPEWHT-L1-0000-008W6

Cree, Inc.

LED XPEWHT-L1-0000-008W6, warm white 3500K, CRI typ. 80, flux min. 73.9lm/350mA

1,000 : $1.676
500 : $1.833
100 : $1.922
50 : $2.008
10 : $2.125
1 : $2.234

Pasternack Enterprises US

PE3C8508/WP

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

336

PE3C8508/WP-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1

PE3C8508/WP-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-50CM can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-50CM can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3C8508/WP-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 24 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 24 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-24 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C8508/WP-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

PE34808/WH

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59-WHITE, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm Mini SMB Plug Cable Using 75 Ohm RG59-WHITE White Coax. PE34808/WH is a N male to Mini SMB plug cable using RG59 coax. This Pasternack N male to Mini SMB plug cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm Mini SMB for connector 2. Our male N to plug Mini SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE34808/WH N male to Mini SMB plug cable assembly is constructed with RG59 coax.

TE Connectivity

CONN008-W

TE Connectivity

N Type Plug 50 Ohm Panel Mount Crimp RF Interface: N Type RF Connector Style: Jack Impedance: 50 Ω Compatible With RF Cable Type: RG 400 RG 55 RG 223 RG 142 RF Connector Coupling Mechanism: Threaded N Type Jack 50 Ω RG 400 | Coax Connector | Part Number: CONN008-W | Internal Number: CONN008-W | TE Connectivity
RoHS : Compliant

1,000 : $14.24
500 : $14.65
250 : $15.1
100 : $15.61
50 : $16.06
1 : $17.63

171

Teledyne HiRel

DM5408W/883

Teledyne HiRel

QUAD 2-INPUT AND GATES

08WL-CB2-R Reseller

Link URL