09HSI-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to SMA Male Cable 24 Inch Length Using PE-SR405AL Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male cable 24 inch length using PE-SR405AL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMA male cable 24 inch length using PE-SR405AL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W16309/HS-24 can also be known as a SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3W16309/HS-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16309/HS-24 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

258

PE3C0709/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG316 Coax with HeatShrink. PE3C0709/HS is a BNC male to SMA male cable using RG316 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0709/HS BNC male to SMA male cable assembly is constructed with RG316 coax.

PE3C1909/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using PE-P195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1909/HS-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1909/HS-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C1909/HS-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE3C2309/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2309/HS-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C2309/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE3W05509/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to TNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W05509/HS-48 can also be known as a low loss right angle SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05509/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3W05509/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05509/HS-48 can also be used in the other direction and will be a TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE3W05809/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Cable Using PE-SR402FL Coax with HeatShrink. PE3W05809/HS is a TNC male right angle to TNC female cable using PE-SR402FL coax. This Pasternack TNC male right angle to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W05809/HS TNC male right angle to TNC female cable assembly is constructed with PE-SR402FL coax.

PE3W14709/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated SSMC Plug to N Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-100-FR Coax with HeatShrink., Radio frequency assembly fire rated SSMC plug to N female bulkhead low loss cable 24 inch length using LMR-100-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SSMC plug to N female bulkhead low loss cable 24 inch length using LMR-100-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMC cable connection on one end and a type N bulkhead cable connection on the other. Our low loss SSMC to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W14709/HS-24 can also be known as a low loss SSMC male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14709/HS-24 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMC plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. SSMC male to type N jack cable assembly PE3W14709/HS-24 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14709/HS-24 can also be used in the other direction and will be a type N female bulkhead to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMC to type N cable assembly for quick shipment worldwide. Variations of SSMC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W12609/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm. 75 Ohm SMC Plug Right Angle to 75 Ohm SMC Jack Bulkhead Cable Using 75 Ohm PE-B150 Coax with HeatShrink. PE3W12609/HS is a SMC plug right angle to SMC jack bulkhead cable using PE-B150 coax. This Pasternack SMC plug right angle to SMC jack bulkhead cable assembly uses a 75 Ohm SMC for connector 1 and a 75 Ohm SMC for connector 2. SMC right angle to SMC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC right angle to jack SMC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W12609/HS SMC plug right angle to SMC jack bulkhead cable assembly is constructed with PE-B150 coax.

PE3W24709/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. SMB Plug to TNC Male Right Angle Cable Using LMR-195-FR Coax with HeatShrink. PE3W24709/HS is a SMB plug to TNC male right angle cable using LMR-195-FR coax. This Pasternack SMB plug to TNC male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm TNC for connector 2. SMB to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24709/HS SMB plug to TNC male right angle cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1209/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-36 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-36 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $80.99
25 : $76.94
50 : $72.89
100 : $69.65

PE3W11509/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W11509/HS is a SMA male to BNC male cable using LMR-240-UF coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11509/HS SMA male to BNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3809/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-100 Coax with HeatShrink. PE3C3809/HS is a BNC male to SMA male cable using LMR-100A coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3809/HS BNC male to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C4609/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE3C4609/HS-60 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C4609/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4609/HS-60 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 60 inch length using LMR-195 coax with heatshrink.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W02109/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W02109/HS is a TNC male to TNC male cable using LMR-240-UF coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02109/HS TNC male to TNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1109/HS2

Pasternack Enterprises

TE Connectivity

BMC-Q2A0009H

TE Connectivity

BMC-Q 0805 9R0 5~13R Tol. High Current Impedance: 9 Ω Current Rating (Max): 3000 mA DC Resistance: .03 Ω Package Size Code: 0805 Product Length: .078 in Automotive Grade Multilayer Chip Bead | 9 Ω 3000 mA .03 Ω 0805 | Part Number: BMC-Q2A0009H | Internal Number: 2176744-4 | TE Connectivity
RoHS : Compliant

5,000 : $0.22
2,500 : $0.22
1,000 : $0.23
500 : $0.23
250 : $0.24
100 : $0.24
50 : $0.25
25 : $0.26
10 : $0.26
1 : $0.27

7,990

2MM-HSP-D09-HT-02-H-TB

TE Connectivity

18P,2MM,PL HDR,DRRT,2.8,0.76AU,TB PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Board-to-Board Number of Positions: 18 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 18 | PCB Header & Receptacle | Part Number: 2MM-HSP-D09-HT-02-H-TB | Internal Number: 1-2823411-8 | TE Connectivity
RoHS : Compliant

5,000 : $7.14
2,500 : $7.31
1,000 : $7.49
500 : $7.66
250 : $7.83
100 : $8.01
50 : $8.18
25 : $8.36
10 : $8.53
1 : $8.71

1,188

Vyrian

MAX6509HAUK-GC1

Analog Devices (Maxim Integrated)

11,731

LTC6409HUDB-TRMPBF

Analog Devices Inc

10,956

111709-HMC463LH250

Analog Devices Inc

7,634

LT8309HS5-TRPBF

Analog Devices Inc

7,461

LT6109HMS-1#PBF

Analog Devices Inc

Operational Amplifier, 1 Func, 450uV Offset-Max, PDSO10
RoHS : Compliant

7,280

LTC6909HMS#TRPBF

Analog Devices Inc

Analog Circuit, 1 Func, PDSO16
RoHS : Compliant

6,120

MAX6709HUB

Maxim Integrated Products

Power Supply Support Circuit, Adjustable, 4 Channel, BICMOS, PDSO10
RoHS : Not Compliant

5,760

XC4085XLA-09HQG160C

AMD Xilinx

Field Programmable Gate Array, 3136 CLBs, 55000 Gates, 227MHz, CMOS, PQFP160
RoHS : Compliant

3,975

XC40110XV-09HQ240C

AMD Xilinx

Field Programmable Gate Array, 4096 CLBs, 75000 Gates, 225MHz, 4096-Cell, CMOS, PQFP240
RoHS : Not Compliant

3,187

XC4044XLA-09HQ304I

AMD Xilinx

Field Programmable Gate Array, 1600 CLBs, 27000 Gates, 227MHz, 1600-Cell, CMOS, PQFP304
RoHS : Not Compliant

2,828

XC4036XL-09HQG240C

AMD Xilinx

Field Programmable Gate Array, 1296 CLBs, 22000 Gates, 217MHz, CMOS, PQFP240

2,415

XC4028XL-09HQ208C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 217MHz, 1024-Cell, CMOS, PQFP208
RoHS : Not Compliant

1,937

XC4052XLA-09HQG160I

AMD Xilinx

Field Programmable Gate Array, 1936 CLBs, 33000 Gates, 227MHz, CMOS, PQFP160
RoHS : Compliant

1,790

XC4020XL-09HTG176C

AMD Xilinx

Field Programmable Gate Array, 784 CLBs, 13000 Gates, 217MHz, CMOS, PQFP176
RoHS : Compliant

1,344

KLDR009HXP

Littelfuse Inc

Electric Fuse, Time Delay Blow, 9A, 600VAC, 300VDC, 200000A (IR), Inline/holder
RoHS : Compliant

401

Win Source Electronics

LM3409HVMYX

National Semiconductor Corporation

PFET Buck Controller for High Power LED Drives
RoHS : Not Compliant

204 : $1.4773
152 : $1.6478
118 : $1.7046
86 : $1.7614
55 : $1.8182
23 : $2.216

35,474

LM3409HVMYX/NOPB

Texas Instruments

IC LED DRIVER CTRLR DIM 10MSOP / LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R
RoHS : Compliant

237 : $1.2673
190 : $1.3188
146 : $1.3704
102 : $1.4734
66 : $1.5249
31 : $1.6279

35,474

MCP9509HT-E/OT

Microchip Technology Inc

IC TEMP SWITCH OD 125C SOT23-5
RoHS : Compliant

280 : $1.0818
210 : $1.2066
165 : $1.2482
120 : $1.2898
80 : $1.3314
35 : $1.6226

35,368

LM3409HVMY

Texas Instruments

IC LED DRIVER CTRLR DIM 10MSOP / LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R

237 : $1.2673
190 : $1.3188
146 : $1.3704
102 : $1.4734
66 : $1.5249
31 : $1.6279

34,000

LM3409HVMY/NOPB

Texas Instruments

IC LED DRIVER CTRLR DIM 10MSOP / LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R
RoHS : Compliant

237 : $1.2673
190 : $1.3188
146 : $1.3704
102 : $1.4734
66 : $1.5249
31 : $1.6279

32,300

MAX6509HAUK+T

Maxim Integrated Products

Temp Sensor 5-Pin SOT-23 T/R / IC TEMP SWITCH RES-PROG SOT23-5
RoHS : Compliant

231 : $1.3023
173 : $1.4526
134 : $1.5027
97 : $1.5528
63 : $1.6029
26 : $1.9535

28,555

MAX6509HAUK

Maxim Integrated Products

RoHS : Not Compliant

213 : $1.5821
159 : $1.7647
123 : $1.8255
90 : $1.8863
58 : $1.9472
24 : $2.3732

24,000

FJP13009H2TU

Fairchild Semiconductor Corporation

TRANS NPN 400V 12A TO-220
RoHS : Compliant

405 : $0.8319
305 : $0.928
235 : $0.96
170 : $0.992
110 : $1.024
45 : $1.2479

16,630

HD64F36109HV

Renesas Electronics Corporation

24 : $14.3929
19 : $14.978
15 : $15.5631
11 : $16.7331
7 : $17.3182
4 : $18.4884

9,960

LTC2309HF#PBF

Analog Devices Inc

8-Channel Single ADC SAR 14ksps 12-bit Serial Automotive 20-Pin TSSOP Tube
RoHS : Compliant

26 : $11.8775
19 : $13.2479
15 : $13.7047
11 : $14.1616
7 : $14.6184
3 : $17.8162

2,620

LTC2309HF#TRPBF

Analog Devices Inc

IC ADC 12BIT SAR 20TSSOP / 12 Bit Analog to Digital Converter 8 Input 1 SAR 20-TSSOP
RoHS : Compliant

24 : $14.2316
18 : $15.8738
14 : $16.4211
10 : $16.9684
7 : $17.5158
3 : $21.3474

2,600

LTC6909HMS#TRPBF

Analog Devices Inc

IC OSC SILICON PROG 16-MSOP
RoHS : Compliant

15 : $22.69
12 : $23.6123
10 : $24.5346
7 : $26.3794
5 : $27.3017
2 : $29.1464

1,710

LTC6909HMS#PBF

Analog Devices Inc

IC OSC SILICON PROG 16-MSOP / Oscillator, Silicon IC 12.5kHz ~ 6.67MHz 16-MSOP
RoHS : Compliant

18 : $16.7381
14 : $18.6694
11 : $19.3132
8 : $19.957
5 : $20.6008
2 : $25.1072

1,660

MAX6509HAUK-T

Maxim Integrated Products

IC TEMP SWITCH RES-PROG SOT23-5
RoHS : Not Compliant

245 : $1.2323
185 : $1.3745
145 : $1.4219
105 : $1.4693
70 : $1.5167
30 : $1.8484

550

09HSI-R Reseller

Link URL