| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty.
BuyNow |
Pasternack Enterprises US | PEANFP1021
| Pasternack Enterprises | Key Specifications. Antenna Type Flat Panel Polarization RHCP Minimum Frequency 902 MHz Maximum Frequency 928 MHz Connector 1 Polarity Standard Connector Series N Connector Gender Female Impedance 50 Ohm Maximum Input VSWR 1.3:1, Pasternack's PEANFP1021 is a Directional RFID flat panel RHCP antenna. The PEANFP1021 with a 12 dBi gain nominal is a Directional antenna. Our 902-928 MHz N-Type female connector, flat panel antenna has a gain of 12 dBi. With an impedance of 50 Ohms and max input power of 20 Watts, the PEANFP1021 RFID flat panel is well suited for Radio Frequency Identification tag reading applications. Contact Pasternack's antenna experts for any assistance on 902-928 MHz, 12 dBi N-Type female connector antennas. This 12 dBi gain RFID antenna is highly directional providing the reader radio the capabilities of simultaneously reading a multitude of RFID tags with a high degree of accuracy. Pasternack's RFID PEANFP1021 has a radome made of ABS in White color and comes from a facility certified to ISO 9001:2015. RHCP flat panel antenna comes with mounting hardware and ABS radome. The included hardware along with Threaded female connector and ABS radome, makes installation effortless. This N-Type connectized Antenna has an overall length of 15 in, width of 15 in, and weighs 4. lbs. Use our on-line ordering system to purchase your PEANFP1021 RFID Directional RHCP antenna 24 hours a day with same-day shipping and no MOQs (minimum order quantities). | 1 : $247.99
25 : $235.59
50 : $223.19
100 : $213.27
|
| 94
 |
PE3CA1029-3
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: WMCX 1.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Male to WMCX 1.6 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA male to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to WMCX 1.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and WMCX 1.6 cable connection on the other. Our SMA to WMCX 1.6 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to WMCX 1.6 cable is a male to plug coax assembly, PE3CA1029-3, can also be known as a SMA plug to WMCX 1.6 male cable assembly and will be shipped same-day as it is purchased. SMA plug to WMCX 1.6 male cable assembly PE3CA1029-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to WMCX 1.6 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to WMCX 1.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1029-3 can also be used in the other direction and will be WMCX 1.6 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to WMCX 1.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to WMCX 1.6 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS. | 1 : $14.79
25 : $14.05
50 : $13.31
100 : $12.72
|
| 76
|
PE3C10274-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum N Male to N Male Low Loss Cable 48 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10274-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10274-48 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3C10274-48 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $103.99
10 : $101.91
25 : $99.83
100 : $97.75
|
| 47
|
PE1V11024
| Pasternack Enterprises | | 1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51
|
| 13
|
PEWAN1026
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-6, Frequency, Min: 110 GHz, Frequency, Max: 170 GHz, Beam Width V: 33, Beam Width H: 31. WR-6 Waveguide Standard Gain Horn Antenna Operating from 110 GHz to 170 GHz with a Nominal 15 dBi Gain with UG-387/U-Mod Round Cover Flange. Pasternack’s PEWAN1026 WR-6 waveguide horn is also known as a waveguide horn antenna. This WR-6 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 110 to 170 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.15:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 1.34 inches, a width of 0.75 inches, and a weight of 0.04 lbs. Our WR-6 waveguide horn antenna has a typical vertical beam width of 33 degrees and a horizontal beam width of 31 degrees at 3 dB. Our antenna comes with a UG-387/U-M round cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-6 standard gain horn antenna has a brass body with gold plating. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-6 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,960.0
5 : $1,920.8
10 : $1,881.6
|
| 1
|
PE3C10219
| Pasternack Enterprises | | | 0
|
PE3C1026
| Pasternack Enterprises | | | 0
|
PE3C10264
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assembly has male gender on end 1 and male on end 2. PE3C10264 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10264 RF cable has a PE jacket of 0.240-inch diameter. The RF cable has an in-series connection. Type N plug to N type plug cable assembly PE3C10264 is built with LMR-240-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with type N to type N cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N and N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3C1028LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400-UF Coax, LF Solder. PE3C1028LF is a N male to N male right angle cable using LMR-400-UF coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1028LF N male to N male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3C11029
| Pasternack Enterprises | | | 0
|
PE3C6102
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to Straight Cut Lead Cable Using LMR-400 Coax., Radio frequency assembly TNC male to straight cut lead cable using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to straight cut lead cable using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and straight cut lead cable connection on the other. Our TNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This TNC to straight cut lead cable is a male to sexless coax assembly, PE3C6102, can also be known as a TNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. TNC plug to straight cut lead sexless cable assembly PE3C6102 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6102 can also be used in the other direction and will be straight cut lead sexless to TNC male cable assembly if the opposite connectivity is required. TNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to straight cut lead cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to straight cut lead cable using LMR-400 coax. | | 0
|
PE3W00102
| Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm F Female Bulkhead to 75 Ohm MCX Plug Cable Using 75 Ohm RG187 Coax. PE3W00102 is a F female bulkhead to MCX plug cable using RG187 coax. This Pasternack F female bulkhead to MCX plug cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm MCX for connector 2. Our female F bulkhead to plug MCX cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W00102 F female bulkhead to MCX plug cable assembly is constructed with RG187 coax. | | 0
|
PE3W10228
| Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. D-Sub Plug Right Angle to D-Sub Receptacle Cable Using RG223 Coax. PE3W10228 is a D-Sub plug right angle to D-Sub receptacle cable using RG223 coax. This Pasternack D-Sub plug right angle to D-Sub receptacle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. D-Sub right angle to D-Sub coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug D-Sub right angle to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10228 D-Sub plug right angle to D-Sub receptacle cable assembly is constructed with RG223 coax. | | 0
|
PE3W10233/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using RG178 Coax with HeatShrink. PE3W10233/HS is a SMA male to BNC female bulkhead cable using RG178 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10233/HS SMA male to BNC female bulkhead cable assembly is constructed with RG178 coax. | | 0
|
PE3C11028
| Pasternack Enterprises | | | 0
|
TE Connectivity | 63610-2
| TE Connectivity | SPRING SPADE TERMINAL 14-10 AWG TPBR Spade Terminal Type: Spade Tongue Terminal Wire Size: 14 – 10 AWG Wire Size: 2 – 6 mm² Wire Size: 4106 – 10382 CMA Stud Size: #10 Spade Tongue Terminal 14 – 10 AWG 2 – 6 mm² 4106 – 10382 CMA | Spade Terminal | Part Number: 63610-2 | Internal Number: 63610-2 | TE Connectivity
RoHS : Compliant | 1,000 : $0.2
100 : $0.27
10 : $0.33
1 : $0.43
|
| 154,061
|
RN102-1-02-3M0
| TE Connectivity | RN102-1-02-3M0 Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN102-1-02-3M0 | Internal Number: 816487-SF | TE Connectivity
RoHS : Compliant | 25 : $3.24
10 : $3.49
1 : $3.74
|
| 26,194
|
1028-041-0205
| TE Connectivity | BKSHL, 2P, BLK, PLG, ST, NW 8.5 Number of Positions: 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PBT Cable Exit Angle: 180 ° Backshell & Deutsch Dtm | 2 Black Backshell PBT | Part Number: 1028-041-0205 | Internal Number: 1028-041-0205 | Alias Number: ZPF000000000133666 | TE Connectivity
RoHS : Compliant | | 10,689
|
102095-3
| TE Connectivity | MOD IV PIN PLTD 30 SEL Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 26 – 22 AWG Operating Voltage: 250 VAC Gold (Au) Pin Gold Flash 26 – 22 AWG | Connector Contact | Part Number: 102095-3 | Internal Number: 102095-3 | TE Connectivity
RoHS : Compliant | 10,000 : $0.41
5,000 : $0.42
2,500 : $0.43
1,000 : $0.44
500 : $0.45
250 : $0.46
100 : $0.47
50 : $0.47
25 : $0.48
10 : $0.49
1 : $0.5
|
| 8,401
|
1028-021-0205
| TE Connectivity | BKSHL, 2P, BLK, REC, ST, NW 7.5/8.5 Number of Positions: 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PA 6 Cable Exit Angle: 180 ° Backshell & Deutsch Dtm | 2 Black Backshell PA 6 | Part Number: 1028-021-0205 | Internal Number: 1028-021-0205 | TE Connectivity
RoHS : Compliant | | 2,972
|
5-102618-4
| TE Connectivity | 12 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 12 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-4 | Internal Number: 5-102618-4 | TE Connectivity
RoHS : Compliant | 2,500 : $3.46
1,000 : $3.55
500 : $3.64
250 : $3.74
100 : $3.83
50 : $3.92
25 : $4.02
10 : $4.11
1 : $4.2
|
| 1,992
|
5102156-4
| TE Connectivity | A/L UNIV HDR 20P VERT Connector System: Wire-to-Board Number of Positions: 20 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 20 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102156-4 | Internal Number: 5102156-4 | TE Connectivity
RoHS : Compliant | 1,000 : $2.54
500 : $2.62
250 : $2.7
100 : $2.79
50 : $2.87
1 : $3.15
|
| 1,468
|
6-102570-1
| TE Connectivity | 26 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 26 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 26 | PCB Header & Receptacle | Part Number: 6-102570-1 | Internal Number: 6-102570-1 | TE Connectivity
RoHS : Compliant | 1,000 : $9.77
500 : $10.07
250 : $10.37
100 : $10.66
50 : $10.96
25 : $11.26
10 : $11.55
1 : $11.85
|
| 678
|
102681-2
| TE Connectivity | 14 AMPMODU MT COVER DR .100CL Connector Cover Type: Latching Cover Primary Product Color: Black Primary Product Material: Thermoplastic Number of Positions: 14 Operating Temperature (Max): 105 °C Latching Cover Black | Connector Cap & Cover | Part Number: 102681-2 | Internal Number: 102681-2 | Thermoplastic | TE Connectivity
RoHS : Compliant | 2,500 : $2.96
1,000 : $3.04
500 : $3.12
250 : $3.2
100 : $3.28
50 : $3.36
25 : $3.44
10 : $3.52
1 : $3.6
|
| 511
|
5102322-8
| TE Connectivity | A/L UNIV HDR 34P RA LAT Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102322-8 | Internal Number: 5102322-8 | TE Connectivity
RoHS : Compliant | 1,000 : $9.24
500 : $9.51
250 : $9.8
100 : $10.13
50 : $10.42
1 : $11.44
|
| 274
|
5102154-5
| TE Connectivity | A/L UNIV HDR 24P VERT Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 24 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102154-5 | Internal Number: 5102154-5 | TE Connectivity
RoHS : Compliant | 1,000 : $2.52
500 : $2.59
250 : $2.67
100 : $2.76
50 : $2.84
1 : $3.12
|
| 176
|
5208010-2
| TE Connectivity | HD-20 PLUG 50P VERT Number of Positions: 50 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 5 D-Shaped Connector | 50 Plug Board-to-Board Board Mount | Part Number: 5208010-2 | Internal Number: 5208010-2 | TE Connectivity
RoHS : Compliant | 1,000 : $18.93
500 : $19.46
250 : $20.07
100 : $20.74
50 : $21.34
1 : $23.43
|
| 103
|
T4110501021-000
| TE Connectivity | M12,FEMALE,STRAIGHT,D CODE,2P,PG7,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 2 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 2 20 | M12 Field Installable Unshielded | Part Number: T4110501021-000 | Internal Number: T4110501021-000 | TE Connectivity
RoHS : Compliant | 500 : $15.55
250 : $16.08
100 : $16.61
50 : $17.15
25 : $17.69
10 : $18.22
1 : $18.76
|
| 97
|
2102352-1
| TE Connectivity | CeeLok FAS-T, Receptacle Kit, Ni Connector System: Wire-to-Wire Circular Connector Type: Circular Connector Receptacle Number of Positions: 8 Circular Connector Shell Size: 8 Shell Plating Material: Electroless Nickel Wire-to-Wire Circular Connector Receptacle 8 | Standard Circular Connector | Part Number: 2102352-1 | Internal Number: 2102352-1 | Electroless Nickel | TE Connectivity
RoHS : Compliant | | 62
|
5102160-8
| TE Connectivity | A/L UNIV HDR 34P RA Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102160-8 | Internal Number: 5102160-8 | TE Connectivity
RoHS : Compliant | 1,000 : $4.72
500 : $4.85
250 : $5.0
100 : $5.17
50 : $5.32
1 : $5.84
|
| 26
|
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand