133R-R2 Price, Reseller, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This N type to 7/16 DIN cable is a female to male coax assembly, PE3C4133-60, can also be known as a low PIM type N jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-60 can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM type N jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder.

1 : $193.99
25 : $184.29
50 : $174.59

PE2CP1133-10

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: 2.92mm, Connector Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 40 GHz, Maximum Input Power: 30 Watt, Coupling Value: 10 dB. Directional 10 dB 2.92mm Coupler From 2 GHz to 40 GHz Rated to 30 Watts. RF coupler part number PE2CP1133-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with 2.92mm ports. Our directional coupler design uses 2.92mm ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 40 GHz. Directional coupler part # PE2CP1133-10 is constructed with a coupling value of 10 dB and a coupler directivity of 10 dB. This female 2.92mm directional coupler is built with a maximum insertion loss of 2.2 dB and a maximum input power of 30 watts. Our directional coupler design with 2.92mm connector is rated for a maximum insertion loss of 2.2 dB and a maximum VSWR of 1.6. Additional female 2.92mm coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1133-10 directional 10 dB 2.92mm coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $1,970.0
5 : $1,891.2
10 : $1,812.4
25 : $1,733.6

PE3C6133

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG8X Coax., Radio frequency assembly N male to TNC male cable using RG8X coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to TNC male cable using RG8X coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C6133, can also be known as a N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C6133 is built with RG8X which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6133 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable using RG8X coax.

PE3M0113-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 SMA Female Bulkhead to TNC Male Cable 36 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA female bulkhead to TNC male cable 36 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA female bulkhead to TNC male cable 36 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/59-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/59-3026 SMA bulkhead cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/59-3026 SMA to M39012/26-0018 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/59-3026 SMA to M39012/26-0018 TNC cable is a female to male coax assembly, PE3M0113-36, can also be known as a MIL-DTL-17/MIL-C-17 M39012/59-3026 SMA jack to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/59-3026 SMA jack to M39012/26-0018 TNC plug cable assembly PE3M0113-36 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/59-3026 SMA cable assembly is manufactured with M39012/59-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/59-3026 SMA female bulkhead to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0113-36 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/59-3026 SMA female bulkhead cable assembly if the opposite connectivity is required. M39012/59-3026 SMA jack bulkhead to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/59-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/59-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA female bulkhead to TNC male cable 36 inch length using M17/119-RG174 coax.

1 : $323.99
25 : $307.79
50 : $291.59

PE3W00133

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA. PE3W00133 is a reverse polarity SMA male to reverse polarity SMA female bulkhead cable using LMR-100A coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00133 SMA reverse polarity male to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12133-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SHV Jack Bulkhead to SHV Plug Cable 48 Inch Length Using RG214 Coax., Radio frequency assembly SHV jack bulkhead to SHV plug cable 48 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV plug cable 48 inch length using RG214 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and plug on end 2. PE3W12133-48 can also be known as a SHV female to SHV male cable assembly and will be shipped same-day as it is purchased. SHV female to SHV male cable assembly PE3W12133-48 is built with RG214 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SHV jack bulkhead to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12133-48 can also be used in the other direction and will be SHV plug to SHV jack bulkhead cable assembly if the opposite connectivity is required. SHV female bulkhead to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV plug cable 48 inch length using RG214 coax.

1 : $335.99
25 : $319.19
50 : $302.39
100 : $288.95

PE3W13340/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male to BNC Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W13340/HS is a reverse polarity BNC male to BNC male cable using LMR-100A-UF coax. This Pasternack reverse polarity BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13340/HS BNC reverse polarity male to BNC male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13346

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female to D-Sub Receptacle Cable Using RG174 Coax. PE3W13346 is a SMA female to D-Sub receptacle cable using RG174 coax. This Pasternack SMA female to D-Sub receptacle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm D-Sub for connector 2. Our female SMA to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13346 SMA female to D-Sub receptacle cable assembly is constructed with RG174 coax.

PE3W13391

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. MMCX Jack to BNC Female Cable Using RG405 Coax. PE3W13391 is a MMCX jack to BNC female cable using RG405 coax. This Pasternack MMCX jack to BNC female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BNC for connector 2. Our jack MMCX to female BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W13391 MMCX jack to BNC female cable assembly is constructed with RG405 coax.

PE3C7133

Pasternack Enterprises

PE3W01133

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. QD SMA Male to MCX Plug Right Angle Cable Using RG400 Coax. PE3W01133 is a SMA male to MCX plug right angle cable using RG400 coax. This Pasternack SMA male to MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01133 SMA male to MCX plug right angle cable assembly is constructed with RG400 coax.

PE3W13329

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Jack to D-Sub Receptacle Cable Using RG316 Coax. PE3W13329 is a MMCX jack to D-Sub receptacle cable using RG316 coax. This Pasternack MMCX jack to D-Sub receptacle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm D-Sub for connector 2. Our jack MMCX to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13329 MMCX jack to D-Sub receptacle cable assembly is constructed with RG316 coax.

PE3W13343LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using LMR-LW195 Coax, LF Solder. PE3W13343LF is a 7/16 DIN male to 7/16 DIN male right angle cable using LMR-LW195 coax. This Pasternack 7/16 DIN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13343LF 7/16 DIN male to 7/16 DIN male right angle cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13352/SP

Pasternack Enterprises

PE3W13374

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Bulkhead Cable Using LMR-195 Coax. PE3W13374 is a reverse polarity TNC male to reverse polarity TNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13374 TNC reverse polarity male to TNC reverse polarity female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

Venkel Ltd.

C0402C0G101-330JNP

VENKEL LTD

Chip Capacitor;0402;C0G;100V;33pF;�5%
RoHS : Compliant

C1206X7R101-333KNP

VENKEL LTD

Chip Capacitor;1206;X7R;100V;0.033uF;�10%
RoHS : Compliant

C1210C0G201-330JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;200V;33pF;�5%
RoHS : Compliant

C1210X7R501-331KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;500V;330pF;�10%
RoHS : Compliant

C1812C0G251-331JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;250V;330pF;�5%
RoHS : Compliant

C1825C0G201-332JNE

VENKEL LTD

HV Chip Capacitor;1825;C0G;200V;3300pF;�5%
RoHS : Compliant

C1825X7R501-333KNE

VENKEL LTD

HV Chip Capacitor;1825;X7R;500V;0.033uF;�10%
RoHS : Compliant

SWCR0603-UK-133JT

VENKEL LTD

Surge Withstanding CR;0603;1/3W;�100PPM;13K;�5%
RoHS : Compliant

SWCR1206-UK-133JT

VENKEL LTD

Surge Withstanding CR;1206;1/3W;�100PPM;13K;�5%
RoHS : Compliant

CR0603-10W-1333DT

VENKEL LTD

Chip Resistor;0603;1/10W;133K ;�0.5%
RoHS : Compliant

CR0805-8W-1334DT

VENKEL LTD

Chip Resistor;0805;1/8W;1.33M;�0.5%
RoHS : Compliant

CR1210-4W-1333FT

VENKEL LTD

Chip Resistor;1210;1/4W;133K ;�1%
RoHS : Compliant

CRG2010-V-1332FT

VENKEL LTD

RoHS 10/10 Green CR;2010;1/2W;13.3K;�1%
RoHS : Compliant

MELFC0102-RE-1333FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;133K;�1%
RoHS : Compliant

MELFC0102-UC-1330FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;133R;�1%
RoHS : Compliant

Vyrian

78613/3C

Murata Manufacturing

Pulse Transformer, GENERAL PURPOSE Application(s), 1CT:1

15,562

11_QMA-50-2-1/133_NH

Huber+suhner Ag

RF Connector, Male, Cable Mount, Crimp Terminal, Plug

11,553

5962-01-332-0572

Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, Hybrid, MBCY8
RoHS : Not Compliant

10,064

LTC6905CS5-133-TRPBF

Analog Devices Inc

9,752

LTC1335ISW#TRPBF

Analog Devices Inc

Line Driver/Receiver, 2 Driver, CMOS, PDSO24
RoHS : Compliant

9,581

78Q2133-DB

Analog Devices (Maxim Integrated)

8,743

LTC1335ISW#TR

Analog Devices Inc

Line Driver/Receiver, 2 Driver, CMOS, PDSO24
RoHS : Not Compliant

7,667

LT1336CN#PBF

Analog Devices Inc

Half Bridge Based MOSFET Driver, 1.5A, BIPolar, PDIP16
RoHS : Compliant

6,896

5962-01-330-8729

Analog Devices Inc

Operational Amplifier, 4 Func, 1200uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant

6,598

LTC1335CSW-TRPBF

Analog Devices Inc

6,479

LT1133ACSW#PBF

Analog Devices Inc

Line Transceiver, 1 Func, 3 Driver, 5 Rcvr, BIPolar, PDSO24
RoHS : Compliant

6,389

LTC1338CG#TR

Analog Devices Inc

Line Transceiver, 1 Func, 5 Driver, 3 Rcvr, CMOS, PDSO28
RoHS : Not Compliant

6,076

LT1133AISW-PBF

Analog Devices Inc

5,165

LTC1338INW#PBF

Analog Devices Inc

Line Transceiver, 5 Func, 5 Driver, 3 Rcvr, CMOS, PDIP28
RoHS : Compliant

5,059

TV06RW13-32SDLC

Amphenol Corporation

MIL Series Connector, 32 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug
RoHS : Not Compliant

811

Waytek, Inc.

1331-BK

Anderson Power Products

16-12 GA Powerpole Contact 30 AMP, Anderson ANDERSON 1331-BK

40 : $0.3947
50 : $0.352
100 : $0.3205
200 : $0.3094
500 : $0.2984
1,000 : $0.2873

8,392

33471-3301

Molex

The Molex 33471-0301 is an MX150 1.5 mm sealed female connector housing designed for reliable wire-to-wire connections in automotive and harsh environments. Featuring a 3-circuit (3-pin), single-row design with keying option A, it ensures proper mating and prevents misconnection. Constructed from durable thermoplastic, it provides environmental sealing (when used with terminals and seals) to protect against moisture, dirt, and vibration. Designed for use with MX150 male pin terminals, it delivers compact, high-performance connectivity in automotive, marine, and industrial applications.
RoHS : Compliant

1 : $0.7791
10 : $0.7695
50 : $0.7432
100 : $0.6742
200 : $0.6397
500 : $0.6282

6,147

1332-BK

Anderson Power Products

20-16GA Power Pole Connector 1332-BK 15 AMP, Anderson ANDERON 1332-BK

40 : $0.3693
50 : $0.3291
100 : $0.2982
200 : $0.289
500 : $0.2781
1,000 : $0.2689

3,818

MS21333-5

UMPCO Inc

3/8" Metal Cable Clamp 1/2 inch wide MS21333-5

25 : $0.3645
50 : $0.3254
100 : $0.295
200 : $0.2853
500 : $0.2755
1,000 : $0.2647

3,310

MS21333-3

UMPCO Inc

1/4" Metal Cable Clamp 1/2 inch wide MS21333-3

25 : $0.509
50 : $0.4545
100 : $0.4121
200 : $0.3984
500 : $0.3848
1,000 : $0.3697

2,345

1339G5-BK

Anderson Power Products

SBS50 & SBSX75 Series Silver Plated Contact Termail 8Ga, Use 455 Crimp Tool

1 : $2.5603
50 : $2.1831
100 : $1.9202
200 : $1.8059
500 : $1.7374

773

MS21333-7

UMPCO Inc

1/2" Metal Cable Clamp 1/2 inch wide MS21333-7

20 : $0.4985
50 : $0.4451
100 : $0.4036
200 : $0.3902
500 : $0.3768
1,000 : $0.362

726

AT11-337-1205

Amphenol Sine Systems

Amphenol Sine Systems AT11-337-1205 contact removal tool is an orange terminal removal tool for size 12, 14-12 Ga. contacts. It is compatible with Amphenol AHD, AHDP and AHDM connectors as well as Deutsch HD, HDP and HDM connector families.

5 : $1.3925
10 : $1.2826

490

1339G2-BK

Anderson Power Products

SBS50 & SBSX75 Series, Silver Plated Contact Terminal 6Ga, Use 455 Crimp Tool

1 : $2.3318
50 : $1.9883
100 : $1.7593
200 : $1.6448
500 : $1.5823

455

MS21333-4

UMPCO Inc

5/16" Metal Cable Clamp 1/2 inch wide MS21333-4

25 : $0.6448
50 : $0.5757
100 : $0.522
200 : $0.5047
500 : $0.4874
1,000 : $0.4682

442