 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
13520-R0075 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
 ECCO | NB13542001-INCHES | TE Connectivity | 2,640 | |||
 Pasternack Enterprises US | PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,106 | |
| PE3FCA113-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to SC UPC, MM OM5, 2.0mm Riser cable, Lime Green-5M. Pasternack’s PE3FCA113-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with simplex LC/UPC to SC/UPC connectors. Our lime green fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA113-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 160 | ||
| PE3C8513-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to N Female Cable Using SPO-375 Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly outdoor rated 7/16 DIN male to N female cable using SPO-375 coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female cable using SPO-375 coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8513-50CM, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8513-50CM is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8513-50CM can also be used in the other direction and will be type N female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female cable using SPO-375 coax using Times Microwave parts in 50 CM. |
| 73 | ||
| PE3C1354/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to SMB Plug Cable Using LMR-100 Coax with HeatShrink. PE3C1354/HS is a N male to SMB plug cable using LMR-100A coax. This Pasternack N male to SMB plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. Our male N to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1354/HS N male to SMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3FCA135-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: FC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC APC, NK to FC APC, NK, SM OS2, 2.0mm LSZH, Yellow-1M. Pasternack’s PE3FCA135-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex FC/APC to FC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA135-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of FC/APC to FC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W01350LF/HS | Pasternack Enterprises | 0 | ||||
| PE3W11353 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Female to BNC Female Cable Using LMR-240-UF Coax. PE3W11353 is a BNC female to BNC female cable using LMR-240-UF coax. This Pasternack BNC female to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11353 BNC female to BNC female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13135 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMB Plug Cable Using RG405 Coax. PE3W13135 is a 2.92mm male to SMB plug cable using RG405 coax. This Pasternack 2.92mm male to SMB plug cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMB for connector 2. Our male 2.92mm to plug SMB cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W13135 2.92mm male to SMB plug cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W13504 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Low Loss Cable Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable using LMR-200 coax. | 0 | |||
| PE3W13508/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to 2.92mm Male Cable Using RG405 Coax with HeatShrink. PE3W13508/HS is a SMP male bulkhead to 2.92mm male cable using RG405 coax. This Pasternack SMP male bulkhead to 2.92mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMP bulkhead to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W13508/HS SMP male bulkhead to 2.92mm male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W13586 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using SPO-250 Coax. PE3W13586 is a N male right angle to N male right angle cable using SPO-250 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W13586 N male right angle to N male right angle cable assembly is constructed with SPO-250 coax. | 0 | |||
| PE3W15135/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug to 75 Ohm F Male Cable Using 75 Ohm RG59 Coax with HeatShrink. PE3W15135/HS is a SMB plug to F male cable using RG59 coax. This Pasternack SMB plug to F male cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm F for connector 2. Our plug SMB to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W15135/HS SMB plug to F male cable assembly is constructed with RG59 coax. | 0 | |||
| PE3C0823LF/PH135 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using LMR-100 Coax with 135 Deg. Clock, LF Solder. PE3C0823LF/PH135 is a SMA male right angle to SMA male right angle cable using LMR-100A coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0823LF/PH135 SMA male right angle to SMA male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C6135 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using PE-P086 Coax., Radio frequency assembly N female to N female cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to N female cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly, PE3C6135, can also be known as a type N jack to N type jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3C6135 is built with PE-P086 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female cable using PE-P086 coax. | 0 | |||
| PE3FCA713-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: MPO (w/o pins), Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. MPO/UPC Female (w/o pins) to MPO/UPC Female (w/o pins), 12 Fiber, Type B, Single Mode OS2, OFNR Jacket-5M. Pasternack’s PE3FCA713-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with MPO (w/o pins)/UPC key up to MPO (w/o pins)/UPC key up connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions.This cable comes with 12-fiber high-density MPO connectivity that supports efficient backbone, current and next-generation 40G/100G/400G optical networks and trunk cabling. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as backbone trunk connections between network switches and fiber enclosures, 40G/100G data center cabling using parallel optic transceivers, MPO cassette connectivity for LC duplex breakout applications, telecommunications room and equipment room interconnects, enterprise and campus network fiber distribution systems, switch-to-switch and SAN infrastructure connections in server environments and future-ready single mode infrastructure for higher-speed network upgrades. With the flexibility of custom lengths, the PE3FCA713-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA713-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to MPO (w/o pins)/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
 Venkel Ltd. | UPTF0603-16W-N-1350DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;135R;�0.5% RoHS : Compliant | 0 | ||
| UPTF0805-10W-N-1350UT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;135R;�0.01% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-1352CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;13.5K;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1351DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;1.35K;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1135DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;11.3M;�0.5% RoHS : Compliant | 0 | |||
| CRG1210-U-135JT | VENKEL LTD | RoHS 10/10 Green CR;1210;1/3W;1.3M;�5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1350CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;135R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1351AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.35K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-1352AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;13.5K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-1350UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;135R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-1353AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;135K ;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1350CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;135R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1351AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.35K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-1352AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;13.5K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-1352FT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;13.5K;�1% RoHS : Compliant | 0 | |||
 Vyrian | BZT52H-C3V9,135 | Nexperia | Zener Diode, 3.9V V(Z), 5.13%, 0.375W, Silicon, Unidirectional RoHS : Compliant | 11,648 | ||
| BAS40W,135 | Nexperia | Rectifier Diode, Schottky, 1 Phase, 1 Element, 0.12A, Silicon RoHS : Compliant | 10,701 | |||
| 5962-01-351-4924 | Analog Devices Inc | Voltage Reference, 10V, BIPolar, CDIP8 RoHS : Not Compliant | 10,521 | |||
| BZT52H-C51,135 | Nexperia | Zener Diode, 51V V(Z), 5.88%, 0.375W, Silicon, Unidirectional RoHS : Unknown | 10,431 | |||
| 1-350777-4 | TE Connectivity | Combination Line Connector, 2 Contact(s), Female, Crimp Terminal, Plug RoHS : Compliant | 7,312 | |||
| 1513583 | Phoenix Contact | Circular Connector, 5 Contact(s), Male RoHS : Compliant | 6,570 | |||
BB135,135 | NXP Semiconductors | Variable Capacitance Diode, Ultra High Frequency, 19.25pF C(T), 30V, Silicon RoHS : Compliant | 6,215 | |||
| 21135295 | Broadcom Limited | 5,648 | ||||
| PRTR5V0U2D,135 | Nexperia | Trans Voltage Suppressor Diode | 4,214 | |||
| 5962-01-357-3163 | Texas Instruments | OT PLD, PAL-Type, TTL, PDIP24 RoHS : Not Compliant | 3,056 | |||
| 115101-35-180 | Amphenol Corporation | Cable Assembly RoHS : Compliant | 871 | |||
| 135D566X9125K6 | Vishay Intertechnologies | Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 56uF, Through Hole Mount RoHS : Not Compliant | 861 | |||
| 135104-03-12.00 | Amphenol Corporation | Interconnection Device RoHS : Compliant | 797 | |||
| 135101-R2-03.00 | Amphenol Corporation | Cable Assembly, 1 Conductor(s), 500V, Communication Cable RoHS : Compliant | 449 | |||
| 135110-01-24.00 | Amphenol Corporation | Interconnection Device RoHS : Compliant | 198 | |||
 Wuhan P&S | TCPT1350X01 | Vishay Intertechnologies | Subminiature Transmissive Optical Sensor with Transistor Output RoHS : Compliant |
| 44,000 | |
| AR0135CS2C00SUEA0-DPBR | onsemi | 1.2MP Global Shutter CMOS Image Sensor RoHS : Compliant |
| 2,182 | ||
| LM135Z | STMicroelectronics | - RoHS : Compliant |
| 5 | ||
| AR0135CS2M00SUEAH3-GEVB | onsemi | - RoHS : Compliant |
| 2 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand