 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
1603-R2 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
 Rutronik | MCT06030D1603BP500 | Vishay Intertechnologies | TF0603 160K 0,1% 0,1W TK25 RoHS : Compliant |
| 45,000 | |
| CR21-1603-FL | ASJ Holdings Limited | RC0805 160K 1% 0,125W TK100 RoHS : Compliant |
| 15,000 | ||
| CR16-1603-FL | ASJ Holdings Limited | RC0603 160K 1% 0,1W TK100 RoHS : Compliant |
| 10,000 | ||
 Chip-Germany GmbH | 2227MC160309 | SPC Multicomp | 34 | |||
| K2-M160/3 | Kraus & Naimer Limited | 4 | ||||
 EBV Elektronik | BAS1603WE6327HTSA1 | Infineon Technologies AG | (Alt: SP000010213) RoHS : Compliant | 168,000 | ||
MCP1603T-ADJI/OS | Microchip Technology Inc | Conv DCDC Single Step Down 27V to 55V 5Pin TSOT TR (Alt: MCP1603T-ADJI/OS) RoHS : Compliant | 3,000 | |||
| HERAF1603G | Taiwan Semiconductor | 50ns 16A 200V High Efficient Recovery Rectifier (Alt: HERAF1603G) RoHS : Compliant | 0 | |||
| LYT1603D-TL | Power Integrations | LED Driver ACDC Buck Step Down 90V to 308V Input 60V135mA Output Max 20kHz 1 Output SOIC8 (Alt: LYT1603D-TL) RoHS : Compliant | 0 | |||
| ACPL-5160-300 | Broadcom Limited | Optocoupler 16Pin CDIP SMD (Alt: ACPL-5160-300) RoHS : Not Compliant | 0 | |||
| MCP1603T-250I/OS | Microchip Technology Inc | Conv DCDC Single Step Down 27V to 55V 5Pin TSOT TR (Alt: MCP1603T-250I/OS) RoHS : Compliant | 0 | |||
| MCP1603T-330I/OS | Microchip Technology Inc | Conv DCDC Single Step Down 27V to 55V 5Pin TSOT TR (Alt: MCP1603T-330I/OS) RoHS : Compliant | 0 | |||
| MCP1603T-180I/OS | Microchip Technology Inc | Conv DCDC Single Step Down 27V to 55V 5Pin TSOT TR (Alt: MCP1603T-180I/OS) RoHS : Compliant | 0 | |||
| MCP1603BT-ADJI/OS | Microchip Technology Inc | Conv DC to DC Single Step Down 27V to 55V 5Pin TSOT23 TR (Alt: MCP1603BT-ADJI/OS) RoHS : Compliant | 0 | |||
| MCP1603LT-330I/OS | Microchip Technology Inc | Conv DCDC Single Step Down 27V to 55V 5Pin TSOT TR (Alt: MCP1603LT-330I/OS) RoHS : Compliant | 0 | |||
| MCP1603BT-330I/OS | Microchip Technology Inc | 20 MHZ 500 MA SYNCHROUS BUCK REGULATOR (Alt: MCP1603BT-330I/OS) RoHS : Compliant | 0 | |||
| CA16031_STRADA-SQ-C | LEDIL | Strada Series Lens for WideArea Lighting Square PMMA 25x25x99mm Clear Tray (Alt: CA16031_STRADA-SQ-C) RoHS : Compliant | 0 | |||
| C16039_STRADELLA-8-T3-PC | LEDIL | Single lenssquare1 Pos139mm D712 (Alt: C16039_STRADELLA-8-T3-PC) RoHS : Compliant | 0 | |||
| C16038_STRADELLA-8-T2-PC | LEDIL | Single lenssquare1 Pos139mm D712 (Alt: C16038_STRADELLA-8-T2-PC) RoHS : Compliant | 0 | |||
| CS16034_STRADELLA-IP-28-T2 | LEDIL | Lens Assembly Stradella Family Square PMMA Clear Screw Mount (Alt: CS16034_STRADELLA-IP-28-T2) RoHS : Compliant | 0 | |||
 Flip Electronics | XFC160-347/480-277 | Energy Recovery Products | Stock, Ship Today | 10 | ||
 Maritex | 512160300 | Molex | Rectangular Connector Housings; 512160300; MOLEX; 1; 3; Straight RoHS : Compliant |
| 36,102 | |
| 1-160301-9 | TE Connectivity | Quick Connect, Disconnect Terminals; 1-160301-9; TE CONNECTIVITY; Bronze; Tin; Non-Insulated; Receptacle RoHS : Compliant |
| 11,080 | ||
| RI0603L1603FT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 0603; 160KOhm; 1%; 1/10W |
| 9,700 | ||
| 2-1761603-3 | TE Connectivity | Male Pin Headers; 2-1761603-3; TE CONNECTIVITY; 2; Vertical; Gold, Tin; 10 RoHS : Compliant |
| 1,123 | ||
| 0603SAF1603T5E | Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 0603; 160K; 1%; 1/10W RoHS : Compliant |
| 550 | ||
| 2061-603/998-404 | WAGO Innovative Connections | Plug-in connector; in 6mm raster; snap-on with release button; 3-pin; horizontal; SMD; for 0.5-1.5mm2 conductors; UL: 10A/300V RoHS : Compliant |
| 396 | ||
| 1-160304-2 | TE Connectivity | Quick Connect, Disconnect Terminals; 1-160304-2; TE CONNECTIVITY; Brass; Tin; Non-Insulated; Receptacle RoHS : Compliant |
| 250 | ||
| AN1603-868 | RainSun Group | Antenna; chip; ISM; 868MHz; 0.5dBi; VSWR<2.0; linear; omni-directional; SMD; 16x3x1.7mm |
| 213 | ||
| AN1603-433 | RainSun Group | Antenna; Chip; ISM; 433MHz; 0.5dBi; VSWR<2.0; linear; SMD; 16x3.1x1.65mm |
| 90 | ||
| DK160302GB23A | NiViss | Body SP-DN90-BODY-6063, diameter: 80mm, height: 66,5mm, aluminium |
| 37 | ||
| M01603 | Visionox | Display LCM OLED; alphanumeric LCD; 3.08"; 20x2 characters; illuminated green; active area 77.3�11.85 mm; SPI; I2C; FFC to ZIF connector; 30 pins |
| 3 | ||
| DK160302GB22 | NiViss | Body SP-DN90-BODY-316L, diameter: 80mm, height: 66,5mm, steel 316L |
| 2 | ||
 Pasternack Enterprises US | PE34160-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 36 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 36 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 36 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34160-36, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34160-36 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34160-36 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 36 inch length using 75 Ohm RG59 coax. |
| 225 | |
| PE3FCA160-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC UPC to LC UPC, MM OM5, 2.0mm Plenum, Lime Green-3M. Pasternack’s PE3FCA160-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long duplex cable assembly is equipped with LC/UPC to LC/UPC connectors. Our lime green fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. As an OM5 fiber optic jumper, Pasternack’s PE3FCA160-3M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM3 and OM4 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA160-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA160-3M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual LC/UPC to dual LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 1 | ||
| PE3W16038 | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to Double Banana Plug Cable Using RG58 Coax. PE3W16038 is a D-Sub receptacle to Double Banana plug cable using RG58 coax. This Pasternack D-Sub receptacle to Double Banana plug cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm Double Banana for connector 2. Our receptacle D-Sub to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16038 D-Sub receptacle to Double Banana plug cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C1603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W16030 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using LMR-600-UF Coax. PE3W16030 is a N male to UHF male cable using LMR-600-UF coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16030 N male to UHF male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16036 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG142 Coax. PE3W16036 is a SHV jack bulkhead to SHV jack bulkhead cable using RG142 coax. This Pasternack SHV jack bulkhead to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16036 SHV jack bulkhead to SHV jack bulkhead cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W21603 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to SMA Female Cable Using LMR-195 Coax. PE3W21603 is a 1.0/2.3 plug to SMA female cable using LMR-195 coax. This Pasternack 1.0/2.3 plug to SMA female cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm SMA for connector 2. Our plug 1.0/2.3 to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21603 1.0/2.3 plug to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11603 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using LMR-240-DB Coax. PE3W11603 is a 7/16 DIN male to 7/16 DIN male cable using LMR-240-DB coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11603 7/16 DIN male to 7/16 DIN male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08160-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N female bulkhead to N male right angle low loss cable 36 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N male right angle low loss cable 36 inch length using LMR-600-DB coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a female gender on end 1 and male on end 2. PE3W08160-36 can also be known as a low loss type N jack to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N jack to type N plug cable assembly PE3W08160-36 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female bulkhead to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08160-36 can also be used in the other direction and will be right angle N type male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N male right angle low loss cable 36 inch length using LMR-600-DB coax. |
| 0 | ||
| PE3W16037 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG58 Coax. PE3W16037 is a SHV jack bulkhead to SHV jack bulkhead cable using RG58 coax. This Pasternack SHV jack bulkhead to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16037 SHV jack bulkhead to SHV jack bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
| PE36160-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMP Female to SMP Female Right Angle Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36160-36, can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36160-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 26.5 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36160-36 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax. |
| 0 | ||
| PE3C1603-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMP Female Right Angle to SMA Male Cable 48 Inch Length Using PE-P086 Coax., Radio frequency assembly SMP female right angle to SMA male cable 48 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male cable 48 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C1603-48 can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3C1603-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1603-48 can also be used in the other direction and will be SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA male cable 48 inch length using PE-P086 coax. |
| 0 | ||
| PE3C1603-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMP Female Right Angle to SMA Male Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly SMP female right angle to SMA male cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C1603-36 can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3C1603-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1603-36 can also be used in the other direction and will be SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA male cable 36 inch length using PE-P086 coax. |
| 0 | ||
| PE3C1603 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Male Cable Using PE-P086 Coax., Radio frequency assembly SMP female right angle to SMA male cable using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C1603 can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3C1603 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1603 can also be used in the other direction and will be SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA male cable using PE-P086 coax. | 0 | |||
| PE3W16034 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug to 75 Ohm F Male Cable Using 75 Ohm RG187 Coax. PE3W16034 is a SMB plug to F male cable using RG187 coax. This Pasternack SMB plug to F male cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm F for connector 2. Our plug SMB to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W16034 SMB plug to F male cable assembly is constructed with RG187 coax. | 0 | |||
 Relay Specialties | HD-816-03P | BlockMaster Blocks | Term Blk; 3-pos; 0.325"; PCB Pin; Ni; M3; NoEnds; 20A 300VAC; PA66; 5.00mm Pin |
| 57 | |
| EKMC1603112 | Panasonic Electronic Components | PANASONIC PASSIVE INFRARED MOT RoHS : Compliant |
| 29 | ||
 TE Connectivity | 1-160301-9 | TE Connectivity | 250 FASTON,REC.,10-12 AWG,PHBZ Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 10 – 12 AWG Wire Size: 4 – 6 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 10 – 12 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 1-160301-9 | Internal Number: 1-160301-9 | TE Connectivity RoHS : Compliant |
| 178,581 | |
| 164160-3 | TE Connectivity | M-SRS PIN ASSY 3+ Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Wire Size: .2 – .5 mm² Tin (Sn) Pin 24 – 20 AWG | Connector Contact | Part Number: 164160-3 | Internal Number: 164160-3 | TE Connectivity RoHS : Compliant |
| 100,380 | ||
| 9-160313-6 | TE Connectivity | 250 PIDG FASTON REC Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 17 – 13 AWG Wire Size: 1 – 2.5 mm² Wire Size: 1980 – 4914 CMA Receptacle Partially Insulated 17 – 13 AWG 1 – 2.5 mm² | Quick Disconnect | Part Number: 9-160313-6 | Internal Number: 9-160313-6 | TE Connectivity RoHS : Compliant |
| 29,022 | ||
| 160389-3 | TE Connectivity | 250 FASTON,REC.,24-17 AWG,PNST Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 24 – 18 AWG Wire Size: .3 – .8 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 24 – 18 AWG .3 – .8 mm² | Quick Disconnect | Part Number: 160389-3 | Internal Number: 160389-3 | TE Connectivity RoHS : Compliant |
| 24,801 | ||
| 5-160321-2 | TE Connectivity | FASTON 110 REC 22-20 AWG ELECTRO TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 20 AWG Wire Size: .32 – .51 mm² Wire Size: 642 – 1021 CMA Receptacle Uninsulated 22 – 20 AWG .32 – .51 mm² | Quick Disconnect | Part Number: 5-160321-2 | Internal Number: 5-160321-2 | Alias Number: CB1468-000 | TE Connectivity RoHS : Compliant |
| 24,534 | ||
| 141603-4 | TE Connectivity | MOD-4 REC.CONTACT Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 26 – 20 AWG Operating Voltage: 250 VAC Gold (Au) Receptacle Gold Flash 26 – 20 AWG | Connector Contact | Part Number: 141603-4 | Internal Number: 141603-4 | TE Connectivity RoHS : Compliant |
| 11,362 | ||
| 2-1761603-9 | TE Connectivity | IDC LOW PRO HDR 26P VERT BLUE Connector System: Wire-to-Board Number of Positions: 26 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 26 2.54 mm .1" | Ribbon Cable Connector | Part Number: 2-1761603-9 | Internal Number: 2-1761603-9 | TE Connectivity RoHS : Compliant |
| 2,264 | ||
| 1-160301-6 | TE Connectivity | 250 FASTON,REC.,10-12 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 10 – 12 AWG Wire Size: 4 – 6 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 10 – 12 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 1-160301-6 | Internal Number: 1-160301-6 | TE Connectivity RoHS : Compliant |
| 1,239 | ||
| 2-1761603-8 | TE Connectivity | IDC LOW PRO HDR 24P VERT BLUE Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 24 2.54 mm .1" | Ribbon Cable Connector | Part Number: 2-1761603-8 | Internal Number: 2-1761603-8 | TE Connectivity RoHS : Compliant |
| 714 | ||
| 3-1761603-5 | TE Connectivity | IDC LOW PRO HDR 50P VERT BLUE Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 3-1761603-5 | Internal Number: 3-1761603-5 | TE Connectivity RoHS : Compliant |
| 578 | ||
| 3-1761603-0 | TE Connectivity | IDC LOW PRO HDR 30P VERT BLUE Connector System: Wire-to-Board Number of Positions: 30 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 30 2.54 mm .1" | Ribbon Cable Connector | Part Number: 3-1761603-0 | Internal Number: 3-1761603-0 | TE Connectivity RoHS : Compliant |
| 428 | ||
| 3-1761603-1 | TE Connectivity | IDC LOW PRO HDR 34P VERT BLUE Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ribbon Cable Connector | Part Number: 3-1761603-1 | Internal Number: 3-1761603-1 | Alias Number: CF4306-000 | TE Connectivity RoHS : Compliant |
| 345 | ||
| 9-160313-5 | TE Connectivity | 250 PIDG FASTON REC Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 17 – 13 AWG Wire Size: 1 – 2.5 mm² Wire Size: 1980 – 4914 CMA Receptacle Partially Insulated 17 – 13 AWG 1 – 2.5 mm² | Quick Disconnect | Part Number: 9-160313-5 | Internal Number: 9-160313-5 | Alias Number: 635096-000 | TE Connectivity RoHS : Compliant |
| 131 | ||
| 5499160-3 | TE Connectivity | A/L UNIV HDR 16P VERT SHT LAT Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5499160-3 | Internal Number: 5499160-3 | TE Connectivity RoHS : Compliant |
| 85 | ||
| 6450160-3 | TE Connectivity | MBXL R/A RCPT 1P+24S+1P PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Co-Planar Number of Positions: 26 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 6450160-3 | Internal Number: 6450160-3 | TE Connectivity RoHS : Compliant |
| 7 | ||
 Teledyne HiRel | 5962-9160301MFA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN RoHS : Not Compliant | 0 | ||
| 5962-9160301MEA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN RoHS : Not Compliant | 0 | |||
M38510/31603BFA | Teledyne HiRel | LATCH, 8-BIT ADDRESSABLE RoHS : Not Compliant | 0 | |||
M38510/31603B2A | Teledyne HiRel | LATCH, 8-BIT ADDRESSABLE RoHS : Not Compliant | 0 | |||
| 5962-9160301M2A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN RoHS : Not Compliant | 0 | |||
M38510/31603BEA | Teledyne HiRel | LATCH, 8-BIT ADDRESSABLE RoHS : Not Compliant | 0 | |||
| M38510/31603BXA | Teledyne HiRel | LATCH, 8-BIT ADDRESSABLE RoHS : Not Compliant | 0 | |||
 Waytek, Inc. | 31-603 | Pollak | Pollak 31-603 2-position ignition switch is a universal die-cast ignition switch with momentary start action and a 0.75" mounting hole pattern. Designed for keyed vehicle starting circuits, it provides compact panel mounting for two-position ignition control. |
| 435 | |
| 9216-03 | Littelfuse Inc | Littelfuse 9216-03 momentary push button switch is an SPST normally off industrial starter switch rated 35A at 12VDC and 20A at 24VDC. It features an O-ring-sealed mounting stem, screw-on black rubber cap, silver contacts, and two screw terminals. |
| 389 | ||
| 624 1603 3 01 RT | Rennsteig Tools Inc | HES 2.4 (SIZE 12) Thin Wall Crimp Die Tool Delphi 13926172 USE WITH PN 385 |
| 5 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand