1622-A3-RV Price, Reseller, Stock

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 500 MHz to 40 GHz 2.92mm Bias Tee Rated to 1000 mA and 50 Volts DC. PE1622 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1622 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,660.0
5 : $2,606.8
10 : $2,553.6

PE3C2162-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Female Bulkhead Low Loss Cable 24 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 24 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 24 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE3C2162-24, can also be known as a low loss SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-24 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 24 inch length using PE-P142LL coax, RoHS.

1 : $263.99
25 : $250.79
50 : $237.59

PE3W16222

Pasternack Enterprises

PE3W16228

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Cable Using LMR-LW195 Coax. PE3W16228 is a reverse polarity SMA male to reverse polarity SMA female cable using LMR-LW195 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16228 SMA reverse polarity male to SMA reverse polarity female cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16224

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG174 Coax. PE3W16224 is a N male right angle to N male right angle cable using RG174 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16224 N male right angle to N male right angle cable assembly is constructed with RG174 coax.

PE38162-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to QMA Female Bulkhead Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to QMA female bulkhead cable 24 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to QMA female bulkhead cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and QMA bulkhead cable connection on the other. Our SMA to QMA cable assembly has male gender on end 1 and female on end 2. PE38162-24 can also be known as a SMA plug to QMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to QMA jack cable assembly PE38162-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38162-24 RF cable are available on our downloadable PDF datasheet.PE38162-24 can also be used in the other direction and will be QMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to QMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PE3C2162-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C2162-200CM, can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS.

1 : $363.99
25 : $345.79
50 : $327.59

PE3W16225

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using LMR-LW195 Coax. PE3W16225 is a SMA male right angle to SMA female bulkhead cable using LMR-LW195 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16225 SMA male right angle to SMA female bulkhead cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE34162-24

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male to BNC Male Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly BNC male to BNC male cable 24 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34162-24, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34162-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 24 inch length using PE-SR405AL coax.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3W11622

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 1.85mm Female Bulkhead to SSMA Male Right Angle Cable Using RG405 Coax. PE3W11622 is a 1.85mm female bulkhead to SSMA male right angle cable using RG405 coax. This Pasternack 1.85mm female bulkhead to SSMA male right angle cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm SSMA for connector 2. 1.85mm to SSMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 1.85mm bulkhead to male SSMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11622 1.85mm female bulkhead to SSMA male right angle cable assembly is constructed with RG405 coax.

PE3W16224LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W16224LF/HS is a N male right angle to N male right angle cable using RG174 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16224LF/HS N male right angle to N male right angle cable assembly is constructed with RG174 coax.

PE3W01622/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using PE-P195 Coax with HeatShrink. PE3W01622/HS is a N male right angle to N male cable using PE-P195 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01622/HS N male right angle to N male cable assembly is constructed with PE-P195 coax.

PE3C1622

Pasternack Enterprises

PE3W16220LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to Black FAKRA Jack Cable Using LMR-100 Coax, LF Solder. PE3W16220LF is a MCX jack to FAKRA jack cable using LMR-100A coax. This Pasternack MCX jack to FAKRA jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack MCX to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16220LF MCX jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W01622LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using PE-P195 Coax with HeatShrink, LF Solder. PE3W01622LF/HS is a N male right angle to N male cable using PE-P195 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01622LF/HS N male right angle to N male cable assembly is constructed with PE-P195 coax.

Venkel Ltd.

MELFC0102-RE-1622CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;16.2K;�0.25%
RoHS : Compliant

MELFC0102-UE-1622FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;16.2K;�1%
RoHS : Compliant

MELFC0204-TC-1622DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;16.2K;�0.5%
RoHS : Compliant

MELFC0204-ZC-1622BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;16.2K;�0.1%
RoHS : Compliant

MELFC0207-XN-1622BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�10PPM;16.2K;�0.1%
RoHS : Compliant

UPTF0603-16W-E-1622AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;16.2K;�0.05%
RoHS : Compliant

UPTF0805-10W-P-1622DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;16.2K;�0.5%
RoHS : Compliant

HPTF0603-QN-1622FT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;16.2K;�1%
RoHS : Compliant

HPTF2010-UE-1622AT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;16.2K;�0.05%
RoHS : Compliant

MELFC0102-RK-1622FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�100PPM;16.2K;�1%
RoHS : Compliant

MELFC0207-VE-1622DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;16.2K;�0.5%
RoHS : Compliant

MELFM0207-XC-1622DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;16.2K;�0.5%
RoHS : Not Compliant

TFCR0603-10W-C-1622FT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;16.2K;�1%
RoHS : Compliant

TFCR0603-10W-K-1622CT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;16.2K;�0.25%
RoHS : Compliant

TFCR1206-4W-C-1622BT

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;16.2K;�0.1%
RoHS : Compliant

Vyrian

SN74ABT162245DGG

Texas Instruments

Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO48
RoHS : Compliant

9,621

74LVTH162241DLG4

Texas Instruments

Bus Driver, LVT Series, 4-Func, 4-Bit, True Output, BICMOS, PDSO48
RoHS : Compliant

9,266

74LVT162240DGVRE4

Texas Instruments

Bus Driver, LVT Series, 4-Func, 4-Bit, Inverted Output, BICMOS, PDSO48
RoHS : Compliant

8,983

SN54LVT162244WD

Texas Instruments

Bus Driver, LVT Series, 4-Func, 4-Bit, True Output, BICMOS, CDFP48
RoHS : Not Compliant

8,488

SN54LVTH162245WD

Texas Instruments

Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP48

8,349

CY74FCT162240CTPACT

Texas Instruments

Bus Driver, FCT Series, 4-Func, 4-Bit, Inverted Output, CMOS, PDSO48

8,038

SN74ALVCH162244ADGVR

Texas Instruments

8,007

74VCXH162245TTR

STMicroelectronics

Bus Transceiver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48
RoHS : Compliant

7,017

SN54ALVTH162244WD

Texas Instruments

Bus Driver, ALVT Series, 4-Func, 4-Bit, True Output, BICMOS, CDFP48

6,492

SN74LVCH162244AG-P

Texas Instruments

6,459

74LVTH162245DLRG4

Texas Instruments

Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO48
RoHS : Compliant

5,012

74LVCH162245ADGG:1

Nexperia

Bus Transceiver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48
RoHS : Compliant

4,888

SN74ALVC162268DLR

Texas Instruments

Bus Exchanger, ALVC/VCX/A Series, 1-Func, 12-Bit, True Output, CMOS, PDSO56
RoHS : Not Compliant

4,245

74ALVT162241DL,118

NXP Semiconductors

Bus Driver, ALVT Series, 4-Func, 4-Bit, True Output, BICMOS, PDSO48
RoHS : Compliant

4,199

22-16-2236

Molex

Board Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, Solder Terminal

691

Waytek, Inc.

12162280

Aptiv PLC

Aptiv 12162280 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. It is suited for space-limited in-line connections and low-energy electronic circuits, with a pull-to-seat design for high-demand sealed applications.
RoHS : Compliant

5 : $2.1018
50 : $1.7778
100 : $1.683
200 : $1.5802
500 : $1.517

2,298

12162279

Aptiv PLC

Aptiv 12162279 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. Designed for space-limited in-line connections and low-energy electronic circuits, it uses a pull-to-seat connection and is made for high-demand sealed applications.

5 : $2.3027
50 : $1.9478
100 : $1.8439
200 : $1.7314
500 : $1.6621

2,202

Win Source Electronics

SDCW3216-2-222TF

Sunlord

CMC 200MA 2LN 2.2K OHM SMD
RoHS : Compliant

5,425 : $0.0619
4,055 : $0.0691
3,135 : $0.0715
2,280 : $0.0738
1,470 : $0.0763
605 : $0.0928

227,719

OPA1622IDRCT

Texas Instruments

IC OPAMP AUDIO 10VSON
RoHS : Compliant

163 : $2.0717
130 : $2.1559
100 : $2.24
70 : $2.4084
45 : $2.4927
22 : $2.6611

17,260

OPA1622IDRCR

Texas Instruments

IC AUDIO 2 CIRCUIT 10VSON / Audio Amplifier 2 Circuit 10-VSON (3x3)
RoHS : Compliant

139 : $2.1667
104 : $2.4167
80 : $2.5
59 : $2.5834
38 : $2.6667
16 : $3.2501

16,390

SN74LVC162244ADGGR

Texas Instruments

IC BUFF/DVR TRI-ST 16BIT 48TSSOP
RoHS : Compliant

234 : $1.4382
188 : $1.4967
145 : $1.5551
101 : $1.672
65 : $1.7305
31 : $1.8473

12,940

SN74ABT162245DLR

Texas Instruments

Bus XCVR Dual 16-CH 3-ST 48-Pin SSOP T/R / IC BUS TRANSCVR 16BIT 48SSOP
RoHS : Compliant

380 : $0.8902
285 : $0.9929
220 : $1.027
160 : $1.0613
105 : $1.0956
45 : $1.3352

11,552

74LVC162244ADGG

Nexperia

16-bit buffer/line driver; with 30ohm series termination resistors, 5V input/output tolerant 3-State
RoHS : Compliant

265 : $1.1527
195 : $1.2856
155 : $1.33
110 : $1.3743
75 : $1.4186
30 : $1.729

7,000

IDT54FCT162245ATEB

Integrated Device Technology Inc

FAST CMOS 16-BIT BIDIRECTIONAL TRANSCEIVERS
RoHS : Not Compliant

8 : $39.8647
6 : $44.4645
5 : $45.9978
4 : $47.531
3 : $49.0643
1 : $59.7971

6,000

74LVCH162245ADL

Nexperia

16-bit bus transceiver with direction pin; 30ohm series termination resistors; 5V Input/Outputs tolerant 3-State
RoHS : Compliant

104 : $3.2596
78 : $3.6359
60 : $3.7612
44 : $3.8865
28 : $4.012
12 : $4.8896

5,085

74LVCH162245ADL112

Nexperia

BUS TRANSCVR, LVC/LCX/Z SERIES / Element Bit per Element Output

105 : $3.2117
79 : $3.5823
61 : $3.7059
44 : $3.8294
29 : $3.9529
12 : $4.8176

5,085

SN74LVTH162245DGGR

Texas Instruments

IC BUS TRANSCVR 16BIT 48TSSOP
RoHS : Compliant

305 : $1.1081
230 : $1.2359
180 : $1.2786
130 : $1.3212
85 : $1.3638
35 : $1.6621

3,810

SN74LVTH162245DGGRG4

Texas Instruments

305 : $1.1081
230 : $1.2359
180 : $1.2786
130 : $1.3212
85 : $1.3638
35 : $1.6621

3,720

SN74LVTH162244DGGR

Texas Instruments

IC BUFF/DVR TRI-ST 16BIT 48TSSOP
RoHS : Compliant

265 : $1.1413
200 : $1.273
155 : $1.3168
115 : $1.3607
75 : $1.4046
30 : $1.7119

2,929

IDT54FCT162244ATEB

Integrated Device Technology Inc

FAST CMOS 16-BIT BUFFER/LINE DRIVER
RoHS : Not Compliant

7 : $57.6576
6 : $64.3105
4 : $66.528
3 : $68.7457
2 : $70.9633
1 : $86.4865

1,080

DS92LX1622SQX/NOPB

Texas Instruments

IC SER/DESER 40WQFN / LVDS Deserializer 0.412V 40-Pin WQFN EP T/R
RoHS : Compliant

39 : $7.8273
31 : $8.1455
24 : $8.4637
17 : $9.1
11 : $9.4182
5 : $10.0546

950

DS92LX1622SQ/NOPB

Texas Instruments

IC SER/DESER 40WQFN
RoHS : Compliant

39 : $7.8273
31 : $8.1455
24 : $8.4637
17 : $9.1
11 : $9.4182
5 : $10.0546

940

1622-A3-RV Reseller

Link URL