18RK-36A-R/ Price, Reseller, Stock

1 : $30.514
5 : $30.514
10 : $26.924
25 : $25.429
50 : $25.429
100 : $24.52
250 : $23.675
500 : $23.675
1,000 : $22.886
2,500 : $22.886
10,000 : $22.147

MS27511C18R

SPI Connects

Backshells & Ac

1 : $13.411
5 : $13.411
10 : $11.833
25 : $11.176
50 : $11.176
100 : $10.776
250 : $10.405
500 : $10.405
1,000 : $10.058
2,500 : $10.058
10,000 : $9.734

MS3180-18RA

SPI Connects

Connector 26482

1 : $10.778
5 : $10.047
10 : $8.982
25 : $8.847
50 : $8.847
100 : $8.717
250 : $8.468
500 : $8.233
1,000 : $8.12
2,500 : $8.12
10,000 : $8.12

MWDM1L-9P-6E5-18R

Glenair Inc

Connector MIL M
RoHS : Not Compliant

M83723/59-118RN

Amphenol PCD

Backshells & Ac

M83723/60-118RN

Amphenol PCD

Backshells & Ac

MS3181-8RA

SPI Connects

Connector 26482

1 : $9.533
5 : $8.886
10 : $7.944
25 : $7.825
50 : $7.825
100 : $7.71
250 : $7.49
500 : $7.282
1,000 : $7.182
2,500 : $7.182
10,000 : $7.182

MS3181-18RW

SPI Connects

Connector 26482

1 : $12.529
5 : $11.679
10 : $10.441
25 : $10.285
50 : $10.285
100 : $10.134
250 : $9.844
500 : $9.571
1,000 : $9.439
2,500 : $9.439
10,000 : $9.439

Flip Electronics

EFC6618R-A-TF

onsemi

Stock, Ship Today

185,000

NCV1117DT18RKG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.11

57,200

MK65FN2M0VMI18R

NXP Semiconductors

Stock
RoHS : Compliant

6,000

NCV59151DS18R4G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.59

2,976

NCP1117DT18RKG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.03

2,500

NCP5663DS18R4G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.52

2,400

KK65FX1M0CAC18R

NXP Semiconductors

Stock

1,500

MK65FX1M0CAC18R

NXP Semiconductors

Stock
RoHS : Compliant

1,500

NCP59151DS18R4G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.58

800

NCP59301DS18R4G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $1.16

700

MK74CB218RLF

Integrated Device Technology Inc

Stock, Ship Today
RoHS : Compliant

1 : $12.14

MK65FN2M0CAC18R

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

Maritex

RCA0318RFLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA0318RFLF; HKR

10,000 : $0.001
5,000 : $0.001
1,000 : $0.001
100 : $0.002
1 : $0.005

150,000

RC1206JR-0718RL

YAGEO Corporation

Chip Resistor; SMD; 1206; 18R; 5%; 1/4W
RoHS : Compliant

25,000 : $0.005
10,000 : $0.006
5,000 : $0.007
1,000 : $0.011
100 : $0.013
10 : $0.019
1 : $0.085

49,108

RCA0618RFLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA0618RFLF; HKR

60,000 : $0.003
10,000 : $0.003
3,000 : $0.004
1,000 : $0.004
100 : $0.006
1 : $0.018

40,000

RCA0318RJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA0318RJLF; HKR

5,000 : $0.001
1,000 : $0.001
100 : $0.001
1 : $0.004

35,000

RCA0218RJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA0218RJLF; HKR

1,000 : $0.001
100 : $0.001
1 : $0.003

30,000

RC0402JR-0718RL

YAGEO Corporation

Resistor; Thick Film; 0402; 18R; 5%; 1/16W
RoHS : Compliant

1,000,000 : $0.001
300,000 : $0.001
150,000 : $0.001
100,000 : $0.001
70,000 : $0.001
50,000 : $0.001
30,000 : $0.001
10,000 : $0.001
100 : $0.002
1 : $0.003

10,000

CRCW120618R0FKTABC

Vishay Intertechnologies

Resistor; thick film; SMD; 1206; 18Ohm; 1%; 0.25W; -55+125 deg.C
RoHS : Compliant

10,000 : $0.006
5,000 : $0.006
1,000 : $0.009
500 : $0.013
100 : $0.022
1 : $0.084

7,740

BZT52-C18_R1_00001

PanJit Semiconductor

Zener Diodes; BZT52-C18_R1_00001; PANJIT; 2; 18 V; 100 nA; 410 mW
RoHS : Compliant

5,000 : $0.012
3,000 : $0.013
1,000 : $0.015
300 : $0.017
100 : $0.022
10 : $0.029
1 : $0.092

545

PB18R-CT

CONNTHERM

Pin Header; pitch 2.54mm; 1x18 pins; assembly: THT; female; angled; single row

1,000 : $0.146
500 : $0.161
250 : $0.176
1 : $0.185

430

PWH18R-CT

CONNTHERM

Header for PCB; pitch 3.00mm; 18-contacts [2x9]; THT; male; side entry; 2 rows; 250V/5A

648 : $0.239
324 : $0.26
108 : $0.278
25 : $0.303
1 : $0.339

360

PBD18R-CT

CONNTHERM

Pin Header; pitch 2.54mm; 2x9 pins; assembly: THT; female; angled; double row

1,000 : $0.158
500 : $0.168
100 : $0.178
1 : $0.191

344

ADP7156ACPZ-1.8-R7

Analog Devices Inc

LDO Regulators; ADP7156ACPZ-1.8-R7; ANALOG DEVICES; 1.2 A; 1; 120 mV
RoHS : Compliant

100 : $11.202
30 : $12.688
10 : $15.042
1 : $18.542

261

ADP3338AKCZ-1.8-R7

Analog Devices Inc

LDO Regulators; ADP3338AKCZ-1.8-R7; ANALOG DEVICES; 3; 1; 1 A; 1.8 V
RoHS : Compliant

300 : $4.828
100 : $5.409
30 : $6.558
10 : $7.628
1 : $10.211

206

RC0805JR-0718RL 18R

YAGEO Corporation

Chip Resistor; SMD; 0805; 18R; 5%; 1/8W

20,000 : $0.006
1,000 : $0.015
500 : $0.02
1 : $0.026

ADP151AUJZ-1.8-R7

Analog Devices Inc

LDO Regulators; ADP151AUJZ-1.8-R7; ANALOG DEVICES; 200 mA; 1; Fixed; 150 mV
RoHS : Compliant

300 : $0.945
100 : $1.09
30 : $1.337
10 : $1.605
1 : $2.181

Neutron USA

TR18RDM150-01G03 BK-BK VI

Cincon Electronics Corporation

Wall Mount AC Adapters 18W 15V 1.2A 2.1mm r/angle med

1 : $54.99

PL-118-RC001

Littelfuse Inc

Industrial Panel Mount Indicators / Switch Indicators PILOT LIGHT

1 : $64.99

S18RW3R

Banner Engineering Corp

Sensor, Opposed Sensing Mode, DO, 20 m, Infrared LED, 950 nm, 20 mA (Avg.)

1 : $144.04

T18RW3DQ1, 34925

Banner Engineering Corp

Photoelectric Sensor, Diffuse, 300mm, 20-25-VAC, SSAC, QD, T18

1 : $254.99

T18RW3R

Banner Engineering Corp

EZ-Beam, Receiver, R: 20m, 20-250Vac, SSAC DO, 2m cable, 33407

1 : $209.99

BI5-G18-RZ3X 7M

TURCK Inc

ProXimity Sensor; 5mm Sensing Distance; AC/DC; NC; Flush Mount

1 : $314.99

QS18RP6LVBQ3-18329

Banner Engineering Corp

Photoelectric Sensor, Retro, Blue, 6.5m, 10-30VDC, PNP, QD, QS18

1 : $426.8

NI10-G18-RZ3X

TURCK Inc

Inductive Sensor, M18 Barrel Non-Flush, R: 10mm, 2wire AC/DC, NC, 20-250VAC/10-300VDC, 2m Cable, T4330700

1 : $276.13

EZ240A18R

Crydom Inc

Solid State Relay, Panel Mt, Load: 24-280Vac 18A, Control: 90-140Vac, Quick Connect - 0.250"
RoHS : Compliant

1 : $138.17

EZE480D18R

Crydom Inc

Solid State Relay, Panel Mt, Load: 48-660Vac18A , Control: 15-32Vdc, RN, Quick Connect - 0.250"
RoHS : Compliant

1 : $205.54

S18RW3FF50Q1

Banner Engineering Corp

Photoelectric Sensor, Fixed Field, 50mm, 20-250VAC, SSAC, QD, S18

1 : $449.99

1SVR405618R3000

ABB Low Voltage Products and Systems

CR-M230AC4G PLUGGABLE INTERFACE REL

1 : $136.71

KF436C18RB2A/32

Kingston Technology Company

32GB 3600MT/S DDR4 CL18 DIMM FURY RENEGADE RGB

1 : $599.99

BI5-P18-RZ3X-B2331

TURCK Inc

Inductive ProXimity Sensor, M18 Barrel, R: 5mm flush, 2wire AC/DC, NC, 7/8"-16UN Conn

1 : $412.79

MYPMA01218RCF-CAB

Murata Power Solutions

Non-Isolated DC/DC Converters

1 : $81.19

Pasternack Enterprises US

PE3C8818/RD

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax.

368

PE3C8818/RD-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-12 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

105

PE3C8818/RD-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-36 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

105

PE3C8818/RD-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-72 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3C8818/RD-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C8818/RD-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE9933-18-R

Pasternack Enterprises

Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Mini Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Mini Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9933-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a mini alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to mini alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9933-18-R Banana plug to mini alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to mini alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to mini alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

PE9931-18-R

Pasternack Enterprises

Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9931-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9931-18-R Banana plug to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

PE9930-18-R

Pasternack Enterprises

STACKING BANANA PLUG TO STACKING BANANA PLUG - 18" RED RATED AT 2500 VOLTS, 5 AMPS & + 50 DEGREE C.

PE9932-18-R

Pasternack Enterprises

Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-18-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

PE9935-18-R

Pasternack Enterprises

Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9935-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a spade connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and lug for side 2. Alligator clip to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9935-18-R Alligator clip to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

PE9936-18-R

Pasternack Enterprises

Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9936-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a spade connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and lug for side 2. Banana plug to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9936-18-R Banana plug to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

TE Connectivity

ROX05SJ18R

TE Connectivity

1/2W SM M/OX 5% 18R Resistance Value: 18 Ω Element Type: Metal Oxide Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Power Rating: .5 W Through-Hole Resistor | 18 Ω Metal Oxide Film General Purpose Resistor 5 % | Part Number: ROX05SJ18R | Internal Number: 3-1676123-3 | TE Connectivity
RoHS : Compliant

10,000 : $0.07
5,000 : $0.07
2,500 : $0.08
1,000 : $0.08
500 : $0.08
250 : $0.08
100 : $0.08
50 : $0.08
25 : $0.09
10 : $0.09
1 : $0.09

8,055

ROX2SJ18R

TE Connectivity

2W SM M/OX 5% 18R Resistance Value: 18 Ω Element Type: Metal Oxide Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 2 W Through-Hole Resistor | 18 Ω Metal Oxide Film Power Resistor 5 % | Part Number: ROX2SJ18R | Internal Number: 1-1625890-9 | TE Connectivity
RoHS : Compliant

10,000 : $0.15
5,000 : $0.15
2,500 : $0.16
1,000 : $0.16
500 : $0.16
250 : $0.17
100 : $0.17
50 : $0.17
25 : $0.18
10 : $0.18
1 : $0.18

7,771

354018RJT

TE Connectivity

3540 18R 5% Resistance Value: 18 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 4 W Surface Mount Resistor | 18 Ω Thick Metal Film Power Resistor 5 % | Part Number: 354018RJT | Internal Number: 8-2176401-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.99
1,000 : $1.02
500 : $1.05
250 : $1.07
100 : $1.1
50 : $1.13
25 : $1.15
10 : $1.18
1 : $1.21

6,401

350218RFT

TE Connectivity

3502 18R 1% Resistance Value: 18 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 18 Ω Thick Metal Film Power Resistor 1 % | Part Number: 350218RFT | Internal Number: 3-2176397-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

4,625

CPF0402B18RE1

TE Connectivity

CPF 0402 18R 0.1% 25PPM 1K RL Resistance Value: 18 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 18 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B18RE1 | Internal Number: 1879208-7 | TE Connectivity
RoHS : Compliant

500 : $0.35
250 : $0.36
100 : $0.37
50 : $0.38
25 : $0.39
10 : $0.41
1 : $0.42

3,630

CRGP1210F18R

TE Connectivity

CRGP 1210 18R 1% Resistance Value: 18 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1210 Surface Mount Resistor | 18 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP1210F18R | Internal Number: 2176329-4 | TE Connectivity
RoHS : Compliant

10,000 : $0.14
5,000 : $0.14
2,500 : $0.15
1,000 : $0.15
500 : $0.15
250 : $0.16
100 : $0.16
50 : $0.16
25 : $0.17
10 : $0.17
1 : $0.17

3,066

356018RJT

TE Connectivity

3560 18R 5% Resistance Value: 18 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 6 W Surface Mount Resistor | 18 Ω Thick Metal Film Power Resistor 5 % | Part Number: 356018RJT | Internal Number: 8-2176407-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.95
500 : $2.01
250 : $2.07
100 : $2.13
50 : $2.19
25 : $2.24
10 : $2.3
1 : $2.36

1,936

CPF0402B118RE1

TE Connectivity

CPF 0402 118R 0.1% 25PPM 1K RL Resistance Value: 118 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 118 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B118RE1 | Internal Number: 6-1879213-1 | TE Connectivity
RoHS : Compliant

500 : $0.35
250 : $0.36
100 : $0.37
50 : $0.38
25 : $0.39
10 : $0.41
1 : $0.42

1,588

RP73PF1J18R7BTDF

TE Connectivity

RP 1J 0.166W 18R7 0.1% 25PPM 1K RL Resistance Value: 18.7 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 18.7 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1J18R7BTDF | Internal Number: 4-1625867-7 | TE Connectivity
RoHS : Compliant

500 : $0.39
250 : $0.41
100 : $0.42
50 : $0.43
25 : $0.45
10 : $0.46
1 : $0.47

1,107

RP73PF2A18R2BTDF

TE Connectivity

RP 2A 0.25W 18R2 0.1% 25PPM 1K RL Resistance Value: 18.2 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 18.2 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A18R2BTDF | Internal Number: 5-1625868-2 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

718

SMW718RJT

TE Connectivity

SMW 7W 18R 5% Taped Resistance Value: 18 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Smd Power Resistor: 7 Watt & 0.10-500 Ohm | 18 Ω Wire Wound Power Resistor 5 % | Part Number: SMW718RJT | Internal Number: 5-2176459-5 | TE Connectivity
RoHS : Compliant

1,000 : $3.55
500 : $3.66
250 : $3.76
100 : $3.87
50 : $3.98
25 : $4.09
10 : $4.19
1 : $4.3

600

355018RJT

TE Connectivity

3550 18R 5% Resistance Value: 18 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 5 W Surface Mount Resistor | 18 Ω Thick Metal Film Power Resistor 5 % | Part Number: 355018RJT | Internal Number: 8-2176404-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.5
500 : $1.55
250 : $1.59
100 : $1.64
50 : $1.69
25 : $1.73
10 : $1.78
1 : $1.82

557

RP73PF2A118RBTDF

TE Connectivity

RP 2A 0.25W 118R 0.1% 25PPM 1K RL Resistance Value: 118 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 118 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A118RBTDF | Internal Number: 3-2176091-1 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

490

CRGP2512F18R

TE Connectivity

CRGP 2512 18R 1% Resistance Value: 18 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 2512 Surface Mount Resistor | 18 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP2512F18R | Internal Number: 2176331-4 | TE Connectivity
RoHS : Compliant

5,000 : $0.34
2,500 : $0.34
1,000 : $0.35
500 : $0.36
250 : $0.37
100 : $0.38
50 : $0.38
25 : $0.39
10 : $0.4
1 : $0.41

CJP300J18RJ

TE Connectivity

CJP 300W 18R 5% Lead Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 18 Ω Wire Wound 5 % Power Resistor | Part Number: CJP300J18RJ | Internal Number: 1-2176508-9 | TE Connectivity
RoHS : Compliant

1 : $117.0

Venkel Ltd.

PWCR0805-RK-18R7FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;18.7R;�1%
RoHS : Compliant

PWCR0805-VL-18R0FT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�200PPM;18R;�1%
RoHS : Compliant

PWCR1206-UL-18R7FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�200PPM;18.7R;�1%
RoHS : Compliant

PWCR2010-YK-18R0FT

VENKEL LTD

Pulse Withstanding CR;2010;1.25W;�100PPM;18R;�1%
RoHS : Compliant

PWCR2512-JK-18R0DT

VENKEL LTD

Pulse Withstanding CR;2512;2W;�100PPM;18R;�0.5%
RoHS : Compliant

PWCR2512-ZK-18R2FT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;18.2R;�1%
RoHS : Compliant

C0805HQN101-8R0CNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;100V;8pF;�0.25pF
RoHS : Compliant

C0805HQN251-8R8CNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;250V;8.8pF;�0.25pF
RoHS : Compliant

AGCR2512-2XK-18R0DT

VENKEL LTD

Auto Grade Resistor;2512;2W;�100PPM;18R;�0.5%
RoHS : Compliant

HPTF0603-QN-18R7DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;18.7R;�0.5%
RoHS : Compliant

HPTF0603-SC-18R2BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;18.2R;�0.1%
RoHS : Compliant

HPTF0805-RE-18R0AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�25PPM;18R;�0.05%
RoHS : Compliant

HPTF1206-TE-18R2AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�25PPM;18.2R;�0.05%
RoHS : Compliant

HPTF1206-TN-18R0DT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;18R;�0.5%
RoHS : Compliant

HPTF2010-UE-18R2DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;18.2R;�0.5%
RoHS : Compliant

Vyrian

LDL112D18R

STMicroelectronics

Fixed Positive LDO Regulator, 1.8V, PDSO8
RoHS : Compliant

12,586

ADP1711AUJZ-1-8-R7

Analog Devices Inc

12,052

ADM7172ACPZ-1.8-R7

Analog Devices Inc

Fixed Positive LDO Regulator, 1.8V, CMOS, PDCC8
RoHS : Compliant

11,817

LD29150PT18R

STMicroelectronics

Fixed Positive LDO Regulator, 1.8V, 0.7V Dropout, BIPolar, PSSO4
RoHS : Compliant

10,921

LD3985J18R

STMicroelectronics

Fixed Positive LDO Regulator, 1.8V, 0.1V Dropout, BICMOS, PBGA5
RoHS : Compliant

8,959

LDBL20D-18R

STMicroelectronics

RoHS : Compliant

8,882

ADP2166ACPZ-1.8-R7

Analog Devices Inc

Switching Regulator, Current-mode, 1400kHz Switching Freq-Max
RoHS : Compliant

8,067

ADP7118AUJZ-1-8-R7

Analog Devices Inc

5,667

MT6V8M18R1-3B

Micron Technology Inc

DRAM

5,390

ADP130AUJZ-1-8-R7

Analog Devices Inc

5,254

NCP59301DS18R4G

onsemi

Fixed Positive LDO Regulator, 1.8V, 0.5V Dropout, BIPolar, PSSO5
RoHS : Compliant

4,975

PLP5018RSMR

Texas Instruments

LED Driver

4,704

MT44K32M18RB-093E-IT-A-TR

Micron Technology Inc

4,409

LDK320M18R

STMicroelectronics

RoHS : Compliant

3,768

LDLN025M18R/BKN

STMicroelectronics

3,178

Waytek, Inc.

T18R0M4 111-01841

HellermannTyton

HellermannTyton T18R0M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.024
5,000 : $0.0224

212,000

T18R0C2 111-00405

HellermannTyton

HellermannTyton T18R0C2 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.04
200 : $0.0378
500 : $0.0349
1,000 : $0.0327
5,000 : $0.0311

41,000

T18R9M4 111-01872

HellermannTyton

HellermannTyton T18R9M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.0244
5,000 : $0.0228

27,000

LPR-02B-18R

OptiFuse

InLine Fuse Holder ATO ATC 10A 18GA Tinned UL1015 4" Leads RED WIRE AND BLACK BASE

5 : $1.7582
10 : $1.6455
50 : $1.5517
100 : $1.4454
200 : $1.389
500 : $1.3327

11,314

T18R0UVM4

HellermannTyton

HellermannTyton T18R0UVM4 UV-resistant cable tie is a black self-locking nylon tie with a 4" length for outdoor and exposed-environment bundling. Its UV-stabilized construction supports durable wire, cable, hose, and tubing fastening where sunlight resistance and long-term retention matter.

1,000 : $0.0948
5,000 : $0.087

4,000

18RK-36A-R/ Reseller

Link URL