| Motore di ricerca datesheet componenti elettronici |
|
18RK-66A-R/ Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Master Electronics | RA73F2A118RBTD | TE Connectivity | RA73F 2A 118R 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | |
| 1SNA238018R0300 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| CJP300J18RJ | TE Connectivity | CJP 300W 18R 5% Lead RoHS : Compliant |
| 0 | ||
| AI-1-8-RD-B-3000 | Phoenix Contact | Ferrules - 1.0 mm² - taped - sleeve length: 8 mm - with plastic collar - galvanically tin-plated - color: red - color range according to DIN 46228-4 - CSA-certified RoHS : Compliant |
| 0 | ||
| RP73D2A18R7BTG | TE Connectivity | RP 2A 18R7 0.1% 15PPM CUT LENGTH Thin Film Precision SMD Higher Power Fixed Resistor RoHS : Compliant |
| 0 | ||
| RQ73C2B118RBTDF | TE Connectivity | RQ 1206 118R 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| RMCF0201JT18R0 | SEI Stackpole Electronics Inc | Thick Film Resistor - 18 ohm ±5% - 0.05W - SMD 0201 - Tape&Reel RoHS : Compliant |
| 0 | ||
| RMCF0603FT18R0 | SEI Stackpole Electronics Inc | Thick Film Resistor - 18 ohm ±1% - 0.1W - SMD 0603 - Tape&Reel RoHS : Compliant |
| 0 | ||
| RMCF1206FT18R0 | SEI Stackpole Electronics Inc | Thick Film Resistor - 18 ohm ±1% - 0.25W - SMD 1206 - Tape&Reel RoHS : Compliant |
| 0 | ||
| RNF12FTD18R2 | SEI Stackpole Electronics Inc | General Purpose Metal Film Resistor - 18.2 ohm ±1% - 0.5W - ±100ppm/°C - Axial Thru Hole - Tape&Reel RoHS : Compliant |
| 0 | ||
| H418R7BYA | TE Connectivity | H4 18R7 0.1% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H8118RBYA | TE Connectivity | H8 118R 0.1% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H818RFDA | TE Connectivity | H8 18R 1% 25PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| E2EX10MB218R2M | OMRON Industrial Automation | Inductive Proximity Sensor - 3-wire DC - M18 - Sensing Distance=10 mm - Unshielded - PNP - NC - Non IO-Link - SHORT BODY RoHS : Compliant |
| 0 | ||
| E2EX12C218R2M | OMRON Industrial Automation | Inductive Proximity Sensor - 3-wire DC - M18 - Sensing Distance=12 mm - Shielded - NPN - NC - Non IO-Link - SHORT BODY RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | CRCW040218R0FKED | Vishay Intertechnologies | SMD Chip Resistor, 18 ohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW040218R0FKED) RoHS : Compliant |
| 200,000 | |
| ERJ-3EKF18R2V | Panasonic Electronic Components | SMD Chip Resistor, 18.2 ohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film - Tape and Reel (Alt: ERJ-3EKF18R2V) |
| 125,000 | ||
| CRCW080518R0FKEAHP | Vishay Intertechnologies | CRCW0805-HP 100 18R 1% ET1 e3 - Tape and Reel (Alt: CRCW080518R0FKEAHP) RoHS : Compliant |
| 30,000 | ||
| CR0402-FX-18R2GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-18R2GLF) RoHS : Compliant |
| 20,000 | ||
| RMCF1206JG18R0 | SEI Stackpole Electronics Inc | - Tape and Reel (Alt: RMCF1206JG18R0) RoHS : Compliant |
| 20,000 | ||
| RC0603FR-0718RL | YAGEO Corporation | SMD Chip Resistor, 18 Ohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose, RC Series - Tape and Reel (Alt: RC0603FR-0718RL) RoHS : Compliant |
| 15,000 | ||
| LDLN025PU18R | STMicroelectronics | - Tape and Reel (Alt: LDLN025PU18R) RoHS : Compliant |
| 10,000 | ||
| ALSR0118R00JE12 | Vishay Intertechnologies | Resistor, 18 Ohm, ? 5%, 1 W, Axial Leaded, Wirewound, Power - Bulk (Alt: ALSR0118R00JE12) RoHS : Compliant |
| 8,300 | ||
STM1818RWX7F![]() | STMicroelectronics | - Tape and Reel (Alt: STM1818RWX7F) RoHS : Compliant |
| 6,000 | ||
| RC0603FR-0718R2L | YAGEO Corporation | SMD Chip Resistor, 18.2 Ohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: RC0603FR-0718R2L) RoHS : Compliant |
| 5,000 | ||
| CRCW060318R2FKEA | Vishay Intertechnologies | SMD Chip Resistor, 18.2 ohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW060318R2FKEA) RoHS : Compliant |
| 5,000 | ||
| RH05018R00FE02 | Vishay Intertechnologies | - Bulk (Alt: RH05018R00FE02) RoHS : Compliant |
| 52 | ||
| HV2818/R4X | Microchip Technology Inc | Analog Switch Low Harmonic Distortion 32-Channel 66MHz 5V 64-Pin QFN - Trays (Alt: HV2818/R4X) RoHS : Not Compliant |
| 20 | ||
| RLR32C18R0GRB14 | Vishay Intertechnologies | Through Hole Resistor, 18 ohm, RLR Series, 1 W, ? 2%, Axial Leaded, 500 V, Metal Film, ? 100ppm/?C - Bulk (Alt: RLR32C18R0GRB14) RoHS : Not Compliant |
| 10 | ||
| MS27511B18R | Glenair Inc | - Bulk (Alt: MS27511B18R) RoHS : Not Compliant |
| 5 | ||
![]() Newark | MFP1-8R2 JI | TT Electronics Welwyn Components | Res, 8R2, 5%, 1W, Axial, Metal Film; |Tt Electronics/welwyn MFP1-8R2 JI RoHS : Compliant |
| 6,534 | |
| RC0603FR-0718R2L | YAGEO Corporation | Chip Res Smd, 18R2, ±1%, 100Mw; |Yageo RC0603FR-0718R2L RoHS : Compliant |
| 5,088 | ||
| RC0603FR-0718R2L | YAGEO Corporation | Chip Res Smd, 18R2, ±1%, 100Mw; |Yageo RC0603FR-0718R2L RoHS : Compliant |
| 5,088 | ||
| MFR4-18RFI | TT Electronics Welwyn Components | Res, 18R, 1%, 500Mw, Axial, Metal Film; |Tt Electronics/welwyn MFR4-18RFI RoHS : Compliant |
| 3,460 | ||
| ADP151WAUJZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 0.2A, Tsot-5, 125Deg C; |Analog Devices, Inc. ADP151WAUJZ-1.8-R7 RoHS : Compliant |
| 2,852 | ||
| ADP151WAUJZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 0.2A, Tsot-5, 125Deg C; |Analog Devices, Inc. ADP151WAUJZ-1.8-R7 RoHS : Compliant |
| 2,852 | ||
| EP1WSS18RJ | TE Connectivity | Resistor, 18R, 5%, 1W, Axial; |Te Connectivity Neohm EP1WSS18RJ RoHS : Compliant |
| 2,240 | ||
| ADM7172ACPZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 2A, Lfcsp-Ep, 125Deg C; |Analog Devices, Inc. ADM7172ACPZ-1.8-R7 RoHS : Compliant |
| 1,104 | ||
| ADM7172ACPZ-1.8-R7 | Analog Devices Inc | Ldo, Fixed, 1.8V, 2A, Lfcsp-Ep, 125Deg C; |Analog Devices, Inc. ADM7172ACPZ-1.8-R7 RoHS : Compliant |
| 1,104 | ||
| MCWR04X18R0FTL | SPC Multicomp | Res, 18R, 1%, 0.0625W, 0402, Thick Film; |Multicomp Pro MCWR04X18R0FTL RoHS : Compliant |
| 471 | ||
| MCWR04X18R0FTL | SPC Multicomp | Res, 18R, 1%, 0.0625W, 0402, Thick Film; |Multicomp Pro MCWR04X18R0FTL RoHS : Compliant |
| 471 | ||
| MTSW-120-09-G-S-318-RA | Samtec Inc | Pin Header, Mtsw-120-09-G-S-318-Ra; |Samtec, Inc. MTSW-120-09-G-S-318-RA RoHS : Compliant |
| 151 | ||
| MTSW-140-07-L-S-118-RA | Samtec Inc | Pin Header, Mtsw-140-07-L-S-118-Ra; |Samtec, Inc. MTSW-140-07-L-S-118-RA RoHS : Compliant |
| 89 | ||
| NB18-RP10F | L-com Inc | Encl Replacement Plate For 1816Xx-10F; |L-Com NB18-RP10F RoHS : Not Compliant |
| 73 | ||
| NB18-RP1HF-1 | L-com Inc | Plate, Mnting; |L-Com NB18-RP1HF-1 RoHS : Compliant |
| 33 | ||
![]() RS | T18R0M4 | HellermannTyton | CABLE TIE, 4" LONG, UL RATED, 18LB TENSILE STRENGTH, PA66, BLACK |
| 108,830 | |
| 18RA-6F (70091862) | STA-KON | FORK TERMINAL, VINYL, HOLE #6, LENGTH .94", WIDTH .25", INSULATION .150, RED |
| 3,105 | ||
| 3241125 (AI 1 5 -18 RD) | Phoenix Contact | FERRULE; SLEEVE LENGTH; 18 MM; LENGTH; 24 MM; RED; AI1 5 -18 RD FERRULE SERIES |
| 500 | ||
| AGC-1/8-R (AGC-1-8-R) | Eaton Electronics | BUSS SMALL DIMENSION FUSE |
| 18 | ||
| S18RW3R (29825) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, RECEIVER, 20M, 20-250VAC, SSAC, CABLE, S18 |
| 11 | ||
| HDF-18RS | Lift Safety | HARD HAT REPLACEMENT SUSPENSION DAX |
| 5 | ||
| GM9236S018-R1 | Pittman Motors | GEARMOTOR, BRUSH, 12VDC, 19.7:1 RATIO, 153 OZ-IN TORQUE |
| 4 | ||
| BI5U-M18-RP6X-H1141 (1635156) | TURCK Inc | PROXIMITY SENSOR, UPROX, 5MM SENSING DISTANCE, NPN, NC, FLUSH MOUNT, |
| 4 | ||
| T18RP6LPQ (44387) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, RECEIVER, 2M, 10-30 VDC, QD, T18 SERIES |
| 3 | ||
| 1SVR405618R3000 | ABB Low Voltage Products and Systems | CR-M230AC4G PLUGGABLE INTERFACE REL |
| 2 | ||
| NB3-CAXL-14U-18RP | Omega Engineering | THERMOCOUPLES, T/C'S MOUNTED IN HEADS |
| 2 | ||
| S18RW3DLQ1 (35150) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 300MM, 20-250VAC, SSAC, QD, S18 |
| 2 | ||
| BI5-M18-RN6X-H1143 (4614603) | TURCK Inc | PROXIMITY SENSOR, 5MM SENSING DISTANCE, NPN, NC, FLUSH MOUNT |
| 2 | ||
| BI5-G18-RDZ30X2-B1331 (4208196) | TURCK Inc | PROXIMITY SENSOR, 5MM SENSING DISTANCE, 2WIRE, DC, NC, FLUSH MOUNT, |
| 2 | ||
| 0803976 (MM-EML (EX18)R C1 SR/BK) | Phoenix Contact | LABELING;LABEL MARKER CASSETTE;0803976 |
| 1 | ||
![]() STMicroelectronics | LDLN025M18R | STMicroelectronics | 250 mA ultra-low noise LDO RoHS : Compliant |
| 12,910 | |
| LDK120M18R | STMicroelectronics | 200 mA low quiescent current very low noise LDO RoHS : Compliant |
| 8,367 | ||
ST1S12G18R![]() | STMicroelectronics | Synchronous rectification with enable, 0.7 A, 1.7 MHz fixed or adjustable step-down switching regulator in TSOT23-5L RoHS : Compliant |
| 5,639 | ||
| STLQ020J18R | STMicroelectronics | 200 mA ultra-low quiescent current LDO RoHS : Compliant |
| 5,530 | ||
| LD49100PU18RY | STMicroelectronics | 1 A, low quiescent current, low-noise voltage regulator with soft start - Automotive grade RoHS : Compliant |
| 3,963 | ||
LDK320M18R![]() | STMicroelectronics | 200 mA low quiescent current and high PSRR voltage regulator RoHS : Compliant |
| 1,846 | ||
| LDK130C18R | STMicroelectronics | 300 mA low quiescent current very low noise LDO (automotive for SOT23-5L package) RoHS : Compliant |
| 235 | ||
| LD39100PU18RY | STMicroelectronics | 1 A low quiescent current low noise voltage regulator RoHS : Compliant |
| 230 | ||
| LDL112D18R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| LDBL20D-18R | STMicroelectronics | 200 mA very low quiescent current linear regulator IC in (0.47x0.47) mm² ST STAMP™ package RoHS : Compliant |
| 0 | ||
| LDL112PU18R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| LD59030DTPU18R | STMicroelectronics | 300 mA very low dropout linear regulator IC RoHS : Compliant |
| 0 | ||
| ST1S15J18R | STMicroelectronics | 500 mA, 6 MHz synchronous step-down converter RoHS : Compliant |
| 0 | ||
STLQ50C18R![]() | STMicroelectronics | 50mA, 3uA Supply current low drop linear regulator RoHS : Compliant |
| 0 | ||
| LD39030ADTPU18R | STMicroelectronics | 300 mA very low quiescent current linear regulator IC RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | EV18R03A | Microchip Technology Inc | IEEE802.3at/bt Type 2 PD EVB PD70201, w/isolated low-profile flyback 24V 1.05A, Projected EOL: |
| 19 | |
| 1N6818R | Microchip Technology Inc | Power Schottky _ Thinkey4, Projected EOL: 2049-02-05 - Contact for Pricing RoHS : Compliant | 0 | |||
| 1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N3318RA | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| HV2818/R4X | Microchip Technology Inc | 16 2:1 multiplexer/demultiplexer, HV analog switches without HV supplies, QFN, Projected EOL: 2046-06-19 RoHS : Compliant |
| 0 | ||
| HV2918/R4X | Microchip Technology Inc | 17 2:1 multiplexer/demultiplexer, HV analog switches without HV supplies, QFN, Projected EOL: 2046-06-19 RoHS : Compliant |
| 0 | ||
| JAN1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTX1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTX1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Sager | MTSW-106-08-T-D-118-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 403 | |
| MTSW-120-09-G-S-318-RA | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 151 | ||
| MTSW-140-07-L-S-118-RA | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 89 | ||
| 1SNA238018R0300 | TE Connectivity | DIN Rail Terminal Blocks RoHS : Compliant | 0 | |||
| S02-18-R-94 | TE Connectivity | TE Connectivity | 0 | |||
| F20718R | ABB Group | UPPER SHELL OF THE 60 AMP CONNECTOR |
| 0 | ||
| HMTSW-102-22-S-S-318-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HMTSW-110-10-T-T-118-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MCL2012V1-8R2-R | Eaton Bussmann | RF Inductors - SMD 8.2 UH 20% |
| 0 | ||
| MTSW-109-23-T-S-118-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-150-09-T-S-318-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| C-300-D-218-RH-LH | General Devices | General Devices |
| 0 | ||
| BK/AHCA-18-R | Eaton Bussmann | Cartridge Fuses AHCA H.V. 3AB fuse, 18A, 100 pack |
| 0 | ||
| AI-4228-P-C18-R | PUI Audio | Piezo Buzzers & Audio Indicators 12VDC 2900Hz 107dBA |
| 0 | ||
| ESE-18R61B | Panasonic Electronic Components | Detector Switches SPST-NC w/boss Right Std lvr J-Ter |
| 0 | ||
![]() PEI Genesis | ACC00E20-18RY-003-LC | Amphenol Corporation |
| 99 | ||
| ACC00AF20-18RX-003 | Amphenol Corporation |
| 0 | |||
| ACC00CF20-18R-003 | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| ACC01E20-18RW-003 | Amphenol Corporation |
| 0 | |||
| ACC01F20-18R-003-LC | Amphenol Corporation |
| 0 | |||
| ACC04E20-18RX-003 | Amphenol Corporation |
| 0 | |||
| ACC05A20-18RY-025 | Amphenol Corporation |
| 0 | |||
| ACC06A20-18RZ-003 | Amphenol Corporation |
| 0 | |||
| ACC06AD20-18RZ-003 | Amphenol Corporation |
| 0 | |||
| ACC06CF20-18R-003-LC | Amphenol Corporation |
| 0 | |||
| ACC08A20-18R-003-LC | Amphenol Corporation |
| 0 | |||
| ACC08A20-18RX-003-LC | Amphenol Corporation |
| 0 | |||
| ACC08A20-18RZ-025 | Amphenol Corporation |
| 0 | |||
| ACC08AD20-18RZ-003 | Amphenol Corporation |
| 0 | |||
| ACC00E20-18RY-003 | Amphenol Corporation |
| 0 | |||
![]() PUI | LPR-03R-18R | 10,599 | ||||
| LPS-01B-18R | 8,318 | |||||
| LPR-05B-18R-LOOP | 4,276 | |||||
| LPM-01B-18R | OptiFuse | RoHS : Compliant | 3,558 | |||
| ANS-W-20A-18R | 1,064 | |||||
| LPA-01W-18R | 1,000 | |||||
| ANS-W-15A-18R | OptiFuse | 898 | ||||
| LPC-08B-18R | 841 | |||||
| ANR-W-10A-18R | 826 | |||||
| ANS-W-10A-18R | 823 | |||||
| ANM-W-20A-18R | 519 | |||||
| ANM-W-15A-18R | 401 | |||||
| LPS-02B-18R | 390 | |||||
| ANR-W-15A-18R | 168 | |||||
| ANR-W-20A-18R | 155 | |||||
![]() Avnet Abacus | RC0402FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-0718RL) RoHS : Compliant | 490,000 | ||
| BLM18RK102SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 1 kohm 200 mA EMIFIL BLM18RK Series 08 ohm 25 (Alt: BLM18RK102SN1D) RoHS : Compliant | 304,000 | |||
| RC0603FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0603FR-0718RL) RoHS : Compliant | 255,000 | |||
| RC0805JR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 5 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805JR-0718RL) RoHS : Compliant | 230,000 | |||
| CRCW080518R2FKEA | Vishay Intertechnologies | SMD Chip Resistor 182 ohm 1 250 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW080518R2FKEA) RoHS : Compliant | 200,000 | |||
| CRCW040218R0FKED | Vishay Intertechnologies | SMD Chip Resistor 18 ohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW040218R0FKED) RoHS : Compliant | 170,000 | |||
| RC0805FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805FR-0718RL) RoHS : Compliant | 75,000 | |||
| RC0402FR-0718R2L | YAGEO Corporation | SMD Chip Resistor 182 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-0718R2L) RoHS : Compliant | 50,000 | |||
| RC1206FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 250 mW 1206 3216 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC1206FR-0718RL) RoHS : Compliant | 30,000 | |||
| CRCW120618R0FKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120618R0FKEA) RoHS : Compliant | 30,000 | |||
| CRCW120618R0JNEAIF | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120618R0JNEAIF) RoHS : Compliant | 30,000 | |||
| RC0603FR-0718R2L | YAGEO Corporation | SMD Chip Resistor 182 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0603FR-0718R2L) RoHS : Compliant | 15,000 | |||
| RC0603JR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 5 100 mW 0603 1608 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0603JR-0718RL) RoHS : Compliant | 10,000 | |||
| RC0201FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 50 mW 0201 0603 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0201FR-0718RL) RoHS : Compliant | 10,000 | |||
| 1SNG610018R0000 | TE Connectivity | Dome Plug for Standard Industrial Application Cable Glands Polyamide 6 Black Bag (Alt: 1SNG610018R0000) RoHS : Compliant | 1,000 | |||
![]() Braemac Americas-Symmetry | AB308-25.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | ||
| AANE-BL-0018-R | Abracon Corporation |
| 0 | |||
| TR18RDM150-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
ASPI-7318-R33M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| TR18RDM180-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
| TR18RDM090-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
ASPI-7318-R82M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| TR18RDM240-01G03 BK-BK VI | Cincon Electronics Corporation | MEDICAL ADAPTER AC-DC |
| 0 | ||
ASPI-7318-R47M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-12.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | |||
ASPI-7318-R68M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-10.000MHZ-18-R60 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-10.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | |||
| ABM10-25.000MHZ-18-R60-4-D30-T | Abracon Corporation | CRYSTAL 25.000MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| TR18RDM050-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
![]() Component Electronics, Inc | CR1206F18R0P05Z | IN STOCK SHIP TODAY |
| 56,000 | ||
| RM04F18R2CT | Cal-Chip Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,900 | ||
| MF25C18R2FT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 8,800 | ||
| MF25C18R7FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 5,000 | ||
| MDL-1/8-R | Eaton Bussmann | IN STOCK SHIP TODAY |
| 760 | ||
| AI10-18RD | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 747 | ||
| CR0402F18R2T1 | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 550 | ||
| RK73H1ETTP18R7F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 297 | ||
| RK73H2BT18R2F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| ERJ-2RKF18R7X | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 170 | ||
| MDA-1/8-R | Eaton Bussmann | IN STOCK SHIP TODAY |
| 95 | ||
MFR-25FBF52-118R![]() | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| BST-132-09-T-D-318-RA | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 8 | |||
MK74CB218R![]() | Integrated Device Technology Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| RS-5-.18R-3% | Vishay Dale | IN STOCK SHIP TODAY |
| 3 | ||
![]() EBV Elektronik | 1N5818RLG![]() | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818RLG) RoHS : Compliant | 5,000 | ||
| LDK120M18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT23 TR (Alt: LDK120M18R) RoHS : Compliant | 3,000 | |||
ST1S12G18R![]() | STMicroelectronics | DCDC Switching Regulator Fixed Synchronous Buck Step Down Single Output 18 V 700 mA 17 MHz 5 Pins TSOT23 (Alt: ST1S12G18R) RoHS : Compliant | 3,000 | |||
| LDLN025M18R | STMicroelectronics | POWER MANAGEMENT (Alt: LDLN025M18R) RoHS : Compliant | 3,000 | |||
| STLQ020J18R | STMicroelectronics | LDO Regulator Pos 18V 02A 4Pin FlipChip TR (Alt: STLQ020J18R) RoHS : Compliant | 3,000 | |||
| LDK130PU18R | STMicroelectronics | LDO Regulator Pos 18V 03A 6Pin VFDFPN TR (Alt: LDK130PU18R) RoHS : Compliant | 3,000 | |||
| 19-218/R6C-FM2P1B7Y/3T | Everlight Electronics Co Ltd | LED Single Chip Red 631nm 25mA 2Pin SMD TR (Alt: 35R60198CD) RoHS : Compliant | 3,000 | |||
LD29080DT18R![]() | STMicroelectronics | LDO Regulator Pos 18V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT18R) RoHS : Compliant | 2,500 | |||
NCP1117DT18RKG![]() | onsemi | LDO Regulator 1 A Fixed and Adjustable Positive Vout 18 V ONSSPCLDO (Alt: NCP1117DT18RKG) RoHS : Compliant | 2,500 | |||
| FOD8318R2 | onsemi | 25 A Output Current IGBT Drive Optocoupler With Active Miller Clamp (Alt: FOD8318R2) RoHS : Compliant | 0 | |||
LDK320M18R![]() | STMicroelectronics | POWER MANAGEMENT (Alt: LDK320M18R) RoHS : Compliant | 0 | |||
| LDK120C18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT323 TR (Alt: LDK120C18R) RoHS : Compliant | 0 | |||
| LDBL20D-18R | STMicroelectronics | 200 mA very low quiescent current linear regulator IC in 047x047 mm STSTAMP package (Alt: LDBL20D-18R) RoHS : Compliant | 0 | |||
| LDL112PU18R | STMicroelectronics | LDO Regulator Positive 18V 12A 6Pin DFN TR (Alt: LDL112PU18R) RoHS : Compliant | 0 | |||
| LD59030DTPU18R | STMicroelectronics | LDO Regulator Pos 18V 03A 4Pin DFN TR (Alt: LD59030DTPU18R) RoHS : Compliant | 0 | |||
![]() ECCO | 9794-18R/R | Amphenol Industrial Operations |
| 2,829 | ||
![]() Flip Electronics | EFC6618R-A-TF | onsemi | Stock, Ship Today | 185,000 | ||
NCV1117DT18RKG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 57,200 | ||
| MK65FN2M0VMI18R | NXP Semiconductors | Stock RoHS : Compliant | 6,000 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,976 | ||
NCP1117DT18RKG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
NCP5663DS18R4G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| KK65FX1M0CAC18R | NXP Semiconductors | Stock | 1,500 | |||
| MK65FX1M0CAC18R | NXP Semiconductors | Stock RoHS : Compliant | 1,500 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
MK74CB218RLF![]() | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 49 | ||
| MK65FN2M0CAC18R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 9 | |||
![]() Maritex | RCA0318RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0318RFLF; HKR |
| 150,000 | |
| RC1206JR-0718RL | YAGEO Corporation | Chip Resistor; SMD; 1206; 18R; 5%; 1/4W RoHS : Compliant |
| 49,108 | ||
| RCA0618RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0618RFLF; HKR |
| 40,000 | ||
| RCA0318RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0318RJLF; HKR |
| 35,000 | ||
| RCA0218RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0218RJLF; HKR |
| 30,000 | ||
| RC0402JR-0718RL | YAGEO Corporation | Resistor; Thick Film; 0402; 18R; 5%; 1/16W RoHS : Compliant |
| 10,000 | ||
| CRCW120618R0FKTABC | Vishay Intertechnologies | Resistor; thick film; SMD; 1206; 18Ohm; 1%; 0.25W; -55+125 deg.C RoHS : Compliant |
| 7,740 | ||
| BZT52-C18_R1_00001 | PanJit Semiconductor | Zener Diodes; BZT52-C18_R1_00001; PANJIT; 2; 18 V; 100 nA; 410 mW RoHS : Compliant |
| 545 | ||
| PB18R-CT | CONNTHERM | Pin Header; pitch 2.54mm; 1x18 pins; assembly: THT; female; angled; single row |
| 430 | ||
| PWH18R-CT | CONNTHERM | Header for PCB; pitch 3.00mm; 18-contacts [2x9]; THT; male; side entry; 2 rows; 250V/5A |
| 360 | ||
| PBD18R-CT | CONNTHERM | Pin Header; pitch 2.54mm; 2x9 pins; assembly: THT; female; angled; double row |
| 344 | ||
| ADP7156ACPZ-1.8-R7 | Analog Devices Inc | LDO Regulators; ADP7156ACPZ-1.8-R7; ANALOG DEVICES; 1.2 A; 1; 120 mV RoHS : Compliant |
| 261 | ||
ADP3338AKCZ-1.8-R7![]() | Analog Devices Inc | LDO Regulators; ADP3338AKCZ-1.8-R7; ANALOG DEVICES; 3; 1; 1 A; 1.8 V RoHS : Compliant |
| 206 | ||
| RC0805JR-0718RL 18R | YAGEO Corporation | Chip Resistor; SMD; 0805; 18R; 5%; 1/8W |
| 50 | ||
ADP151AUJZ-1.8-R7![]() | Analog Devices Inc | LDO Regulators; ADP151AUJZ-1.8-R7; ANALOG DEVICES; 200 mA; 1; Fixed; 150 mV RoHS : Compliant |
| 4 | ||
![]() Neutron USA | TR18RDM150-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount AC Adapters 18W 15V 1.2A 2.1mm r/angle med |
| 32 | |
| PL-118-RC001 | Littelfuse Inc | Industrial Panel Mount Indicators / Switch Indicators PILOT LIGHT |
| 22 | ||
| S18RW3R | Banner Engineering Corp | Sensor, Opposed Sensing Mode, DO, 20 m, Infrared LED, 950 nm, 20 mA (Avg.) |
| 17 | ||
| T18RW3DQ1, 34925 | Banner Engineering Corp | Photoelectric Sensor, Diffuse, 300mm, 20-25-VAC, SSAC, QD, T18 |
| 16 | ||
| T18RW3R | Banner Engineering Corp | EZ-Beam, Receiver, R: 20m, 20-250Vac, SSAC DO, 2m cable, 33407 |
| 8 | ||
| BI5-G18-RZ3X 7M | TURCK Inc | ProXimity Sensor; 5mm Sensing Distance; AC/DC; NC; Flush Mount |
| 5 | ||
| QS18RP6LVBQ3-18329 | Banner Engineering Corp | Photoelectric Sensor, Retro, Blue, 6.5m, 10-30VDC, PNP, QD, QS18 |
| 0 | ||
| NI10-G18-RZ3X | TURCK Inc | Inductive Sensor, M18 Barrel Non-Flush, R: 10mm, 2wire AC/DC, NC, 20-250VAC/10-300VDC, 2m Cable, T4330700 |
| 0 | ||
| EZ240A18R | Crydom Inc | Solid State Relay, Panel Mt, Load: 24-280Vac 18A, Control: 90-140Vac, Quick Connect - 0.250" RoHS : Compliant |
| 0 | ||
| EZE480D18R | Crydom Inc | Solid State Relay, Panel Mt, Load: 48-660Vac18A , Control: 15-32Vdc, RN, Quick Connect - 0.250" RoHS : Compliant |
| 0 | ||
| S18RW3FF50Q1 | Banner Engineering Corp | Photoelectric Sensor, Fixed Field, 50mm, 20-250VAC, SSAC, QD, S18 |
| 0 | ||
| 1SVR405618R3000 | ABB Low Voltage Products and Systems | CR-M230AC4G PLUGGABLE INTERFACE REL |
| 0 | ||
| KF436C18RB2A/32 | Kingston Technology Company | 32GB 3600MT/S DDR4 CL18 DIMM FURY RENEGADE RGB |
| 0 | ||
| BI5-P18-RZ3X-B2331 | TURCK Inc | Inductive ProXimity Sensor, M18 Barrel, R: 5mm flush, 2wire AC/DC, NC, 7/8"-16UN Conn |
| 0 | ||
| MYPMA01218RCF-CAB | Murata Power Solutions | Non-Isolated DC/DC Converters |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8818/RD | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax. | 368 | ||
| PE3C8818/RD-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-12 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax. |
| 105 | ||
| PE3C8818/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-36 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax. |
| 105 | ||
| PE3C8818/RD-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-72 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax. |
| 86 | ||
| PE3C8818/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 52 | ||
| PE3C8818/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE9933-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Mini Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Mini Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9933-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a mini alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to mini alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9933-18-R Banana plug to mini alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to mini alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to mini alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9931-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9931-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9931-18-R Banana plug to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9930-18-R | Pasternack Enterprises | STACKING BANANA PLUG TO STACKING BANANA PLUG - 18" RED RATED AT 2500 VOLTS, 5 AMPS & + 50 DEGREE C. | 0 | |||
| PE9932-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-18-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9935-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9935-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a spade connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and lug for side 2. Alligator clip to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9935-18-R Alligator clip to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9936-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9936-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a spade connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and lug for side 2. Banana plug to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9936-18-R Banana plug to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
![]() Venkel Ltd. | PWCR0805-RK-18R7FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;18.7R;�1% RoHS : Compliant | 0 | ||
| PWCR0805-VL-18R0FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�200PPM;18R;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UL-18R7FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�200PPM;18.7R;�1% RoHS : Compliant | 0 | |||
| PWCR2010-YK-18R0FT | VENKEL LTD | Pulse Withstanding CR;2010;1.25W;�100PPM;18R;�1% RoHS : Compliant | 0 | |||
| PWCR2512-JK-18R0DT | VENKEL LTD | Pulse Withstanding CR;2512;2W;�100PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-18R2FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;18.2R;�1% RoHS : Compliant | 0 | |||
| C0805HQN101-8R0CNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;100V;8pF;�0.25pF RoHS : Compliant | 0 | |||
| C0805HQN251-8R8CNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;250V;8.8pF;�0.25pF RoHS : Compliant | 0 | |||
| AGCR2512-2XK-18R0DT | VENKEL LTD | Auto Grade Resistor;2512;2W;�100PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| HPTF0603-QN-18R7DT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;18.7R;�0.5% RoHS : Compliant | 0 | |||
| HPTF0603-SC-18R2BT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;18.2R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-RE-18R0AT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�25PPM;18R;�0.05% RoHS : Compliant | 0 | |||
| HPTF1206-TE-18R2AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�25PPM;18.2R;�0.05% RoHS : Compliant | 0 | |||
| HPTF1206-TN-18R0DT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| HPTF2010-UE-18R2DT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;18.2R;�0.5% RoHS : Compliant | 0 | |||
![]() Waytek, Inc. | T18R0M4 111-01841 | HellermannTyton | HellermannTyton T18R0M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 212,000 | |
| T18R0C2 111-00405 | HellermannTyton | HellermannTyton T18R0C2 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 41,000 | ||
| T18R9M4 111-01872 | HellermannTyton | HellermannTyton T18R9M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 27,000 | ||
| LPR-02B-18R | OptiFuse | InLine Fuse Holder ATO ATC 10A 18GA Tinned UL1015 4" Leads RED WIRE AND BLACK BASE |
| 11,314 | ||
| T18R0UVM4 | HellermannTyton | HellermannTyton T18R0UVM4 UV-resistant cable tie is a black self-locking nylon tie with a 4" length for outdoor and exposed-environment bundling. Its UV-stabilized construction supports durable wire, cable, hose, and tubing fastening where sunlight resistance and long-term retention matter. |
| 4,000 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |