 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
206HG-10AF5-R Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
 ComSIT USA | LI1206H121R10 | STEWARD/LAIRD TECHNOLOGIES | AVAILABLE EU | 284 | ||
ComSIT USA | V33MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 33V, 0.8J, Surface Mount RoHS : Compliant | 100,000 | ||
| V42MLA1206H | Littelfuse Inc | Varistor RoHS : Compliant | 60,000 | |||
| LI1206H121R10 | Qnity Laird | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 27,202 | |||
| V14MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 14V, 0.05J, Surface Mount RoHS : Compliant | 17,500 | |||
| VJ1206H333KXABE31 | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X8R, 15% TC, 0.033uF, Surface Mount, 1206 RoHS : Compliant | 6,000 | |||
| V56MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 56V, 1J, Surface Mount RoHS : Compliant | 2,500 | |||
| V68MLA1206H | Littelfuse Inc | SURFACE MOUNT MULTILAYER VARISTOR Varistor, 68V, 1J, Surface Mount RoHS : Compliant | 1,630 | |||
 NexGen Digital | P1206H2005BGT | Vishay Huntington | 71 | |||
 PEI Genesis | 71-533722-06H | Amphenol Corporation |
| 53 | ||
| 75-068232-06H | Amphenol Corporation |
| 0 | |||
 PUI | 4172-06HB | 1,000 | ||||
 Chip 1 Exchange | SF-1206HIA200M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 15,600 | ||
| P1206HB 8K66 1% | Vishay Intertechnologies | INSTOCK | 9,000 | |||
| V56MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,927 | |||
| V68MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,000 | |||
| NPO1206HTTD152F | INSTOCK | 3,748 | ||||
| V5.5MLA1206H | INSTOCK | 2,450 | ||||
| SAA7206H/C2 | INSTOCK | 2,374 | ||||
| CC1206HNPO470J | TDK Corporation | INSTOCK | 2,000 | |||
| V68MLA1206H | INSTOCK | 2,000 | ||||
| V14MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 2,000 | |||
| FCP1206H103JH2 | INSTOCK | 1,396 | ||||
| SAA7206H | INSTOCK | 528 | ||||
| SF-1206HI075M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 211 | |||
| V26MLA1206H | INSTOCK | 100 | ||||
| FCP1206H332J-H1 | INSTOCK | 90 | ||||
 Avnet Asia | F1206HD30A0TM-NV3 | AEM Inc | (Alt: F1206HD30A0TM-NV3) RoHS : Compliant |
| 15,000 | |
| F1206HI2500V032TM | AEM Inc | (Alt: F1206HI2500V032TM) RoHS : Compliant | 15,000 | |||
| F1206HI3500V032TM | AEM Inc | (Alt: F1206HI3500V032TM) RoHS : Compliant |
| 15,000 | ||
| F1206HC25A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 25 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC25A0TM) RoHS : Compliant | 12,000 | |||
| F1206HA12V024T | AEM Inc | (Alt: F1206HA12V024T) RoHS : Compliant |
| 3,000 | ||
| F1206HA15V024TM | AEM Inc | (Alt: F1206HA15V024TM) RoHS : Compliant |
| 3,000 | ||
| F1206HI2000V063TM | AEM Inc | (Alt: F1206HI2000V063TM) RoHS : Compliant | 3,000 | |||
| F1206HI6000V024TM | AEM Inc | (Alt: F1206HI6000V024TM) RoHS : Compliant | 3,000 | |||
| F1206HB10V024TM | AEM Inc | (Alt: F1206HB10V024TM) RoHS : Compliant | 0 | |||
| F1206HB20V024TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 20 A, 24 VDC, 1206 [3216 Metric], SolidMatrix HB (Alt: F1206HB20V024TM) RoHS : Compliant | 0 | |||
| F1206HC12A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 12 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC12A0TM) RoHS : Compliant | 0 | |||
| F1206HA10V024T | AEM Inc | (Alt: F1206HA10V024T) RoHS : Compliant | 0 | |||
| F1206HB15V024T | AEM Inc | (Alt: F1206HB15V024T) RoHS : Compliant | 0 | |||
| F1206HC10A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 10 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC10A0TM) RoHS : Compliant | 0 | |||
| F1206HI1500V063T | AEM Inc | (Alt: F1206HI1500V063T) RoHS : Compliant | 0 | |||
 Avnet Silica | MPP4203-206-HS | Microchip Technology Inc | Diode PIN Switch 50V 2Pin Style 206 (Alt: MPP4203-206-HS) RoHS : Compliant | 0 | ||
| MPP4201-206-HS | Microchip Technology Inc | MSWMPP4201206HS (Alt: MPP4201-206-HS) RoHS : Compliant | 0 | |||
| MPV2100-206-HS | Microchip Technology Inc | Diode VAR Cap Single 22V 09pF 2Pin Style 206 (Alt: MPV2100-206-HS) RoHS : Not Compliant | 0 | |||
PIC24EP512GP206-H/PT | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMCV-1206H-380-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AMCV-1206H-560-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-480-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-180-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-101-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-600-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-850-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-300-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 DB Roberts | NAS1352-06H12P | Military Specifications |
| 500 | ||
 EBV Elektronik | MMDP-67206HV-15-E | Microchip Technology Inc | FIFO Mem Async Dual DepthWidth BiDir 16K X 9 28Pin FPAK (Alt: MMDP-67206HV-15-E) RoHS : Not Compliant | 0 | ||
| PIC24EP512GP206-H/PT | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
 Master Electronics | AMCV-1206H-380-T | Abracon Corporation | SMD Multilayer Chip Varistor - 50 Volts - 250 Amps - -55°C to 125°C - 1206 RoHS : Compliant |
| 3,000 | |
| CW1K-32HE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| MTMM-112-06-H-D-145 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-06-H-D-190-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-06-H-D-435-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FN9222-12-06HI | TE Connectivity | IEC Inlet Filter 250VAC 12A Faston IEC Inlet C MOQ Reduction RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-290-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-330-100-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CW4K-33DE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| TW-22-06-H-D-375-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-06-H-D-410-SM-A-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FN9233EU-12-06HI | TE Connectivity | IEC Inlet AP Filter 250VAC 12A Faston Earth Li MOQ Reduction RoHS : Compliant |
| 0 | ||
| CW4K-31GE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| SF-1206HI075M-2 | Bourns Inc | 1206 High-Inrush Multilayer 0.75A /Tape & Reel - 7 Reel |Bourns SF-1206HI075M-2 RoHS : Compliant |
| 0 | ||
| SF-1206HI200M-2 | Bourns Inc | 1206 SMD High-Inrush Multilayer 2.0A RoHS : Compliant |
| 0 | ||
 Neutron USA | SF-1206HV40M-2 | Bourns Inc | Surface Mount Fuses 40A Single blow fuse 1206 SinglFuse RoHS : Compliant |
| 50 | |
| FN9222R-12-06HI | Schaffner | AC Power Entry Modules 12A RoHS : Compliant |
| 50 | ||
 Pasternack Enterprises US | PE3W10206/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type F plug cable assembly PE3W10206/HS is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this N type male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS can also be used in the other direction and will be type F male to type N male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to F type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable using 75 Ohm RG187 coax with heatshrink. | 25 | ||
| PE3W10206/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm N Male to 75 Ohm F Male Cable 60 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-60 can also be known as a type N plug to F type plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3W10206/HS-60 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-60 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W10206/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm N Male to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and F type cable connection on the other. Our type N to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-36 can also be known as a N type plug to F type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type F plug cable assembly PE3W10206/HS-36 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-36 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W10206/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm N Male to 75 Ohm F Male Cable 24 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-24 can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. N type plug to F type plug cable assembly PE3W10206/HS-24 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-24 can also be used in the other direction and will be F type male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 24 inch length using 75 Ohm RG187 coax with heatshrink. |
| 5 | ||
| PE3W01206/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W01206/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MCX Jack to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-100CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-100CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W15206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to MCX Jack Cable Using RG316 Coax with HeatShrink. PE3W15206/HS is a FAKRA jack to MCX jack cable using RG316 coax. This Pasternack FAKRA jack to MCX jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MCX for connector 2. Our jack FAKRA to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15206/HS FAKRA jack to MCX jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W05206/HS | Pasternack Enterprises | 0 | ||||
| PE3C0206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Female Cable Using RG400 Coax with HeatShrink. PE3C0206/HS is a Mini UHF male to N female cable using RG400 coax. This Pasternack Mini UHF male to N female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0206/HS Mini UHF male to N female cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W03206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using RG58 Coax with HeatShrink. PE3W03206/HS is a N female bulkhead to SMA male cable using RG58 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03206/HS N female bulkhead to SMA male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W22206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 10KV Male Cable Using RG58 Coax with HeatShrink. PE3W22206/HS is a 1.0/2.3 male right angle to 10KV male cable using RG58 coax. This Pasternack 1.0/2.3 male right angle to 10KV male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10KV for connector 2. 1.0/2.3 right angle to 10KV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22206/HS 1.0/2.3 male right angle to 10KV male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W01206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-48 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-48 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to BNC Female Bulkhead Cable Using LMR-195 Coax with HeatShrink. PE3W07206/HS is a reverse polarity TNC male to BNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity TNC male to BNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male TNC to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07206/HS TNC reverse polarity male to BNC female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01206/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-24 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-24 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | P1206H4221BBW | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 13,943 | ||
| P1206H4321BBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 12,931 | |||
| P1206H4221BBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 12,883 | |||
| PHT1206H2491FNT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 2490ohm, 200V, 1% +/-Tol, 55ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 12,707 | |||
| P1206H1332DBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 13300ohm, 200V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 8,936 | |||
| P1206H1005BGT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 10000000ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 8,611 | |||
| QLMP-K206-HH0ED | Broadcom Limited | 6,908 | ||||
PT78NR206H | Texas Instruments | Switching Regulator, Voltage-mode, 700kHz Switching Freq-Max, Hybrid RoHS : Compliant | 3,928 | |||
| P1206H4221BBTA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 | 884 | |||
| P1206H4321BBTA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 | 788 | |||
| P-1206H4221BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 786 | |||
| P1206H4221BBWA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 | 783 | |||
| P-1206H4321BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 729 | |||
| P1206H4221BBT100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 701 | |||
| MPL4700-206-HS | Microchip Technology Inc | Pin Diode, 25V V(BR), Silicon RoHS : Compliant | 593 | |||
 Win Source Electronics | V26MLA1206H | Littelfuse Inc | VARISTOR 34V 150A 1206 / Varistor Products Surface Mount Multilayer Varistors (MLVs) > MLA Series RoHS : Compliant |
| 3,438 | |
| V5.5MLA1206H | Littelfuse Inc | VARISTOR 8.2V 150A 1206 RoHS : Compliant |
| 1,410 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand