| Motore di ricerca datesheet componenti elettronici |
|
318K7-R Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Newark | BAR64-05W-E3-18 | Vishay Intertechnologies | RF DIODE, 100V, 0.1A, SOT-323; RoHS : Compliant |
| 9,975 | |
| BAR64-05W-E3-18 | Vishay Intertechnologies | RF DIODE, 100V, 0.1A, SOT-323; RoHS : Compliant |
| 9,975 | ||
| MAX31865ATP+ | Analog Devices Inc | TEMPERATURE SENSOR, 0.5DEG C, TQFN-20; RoHS : Compliant |
| 1,949 | ||
| 665104131822 | Wurth Elektronik | CONNECTOR, HEADER, 4POS, 2ROW, 2.54MM; RoHS : Compliant |
| 1,500 | ||
| HCPL-3180-300E | Broadcom Limited | OPTOCOUPLER, GATE DRIVE, 3750VRMS; RoHS : Compliant |
| 981 | ||
| AS-14.31818-18 | Raltron Electronics Corporation | CRYSTAL; FREQUENCY:14.31818MHZ; FREQUENC RoHS : Compliant |
| 480 | ||
| AS-14.31818-18 | Raltron Electronics Corporation | CRYSTAL; FREQUENCY:14.31818MHZ; FREQUENC RoHS : Compliant |
| 480 | ||
LM318P![]() | Texas Instruments | IC, OP AMP, SINGLE LIN, PDIP8, 318; RoHS : Compliant |
| 148 | ||
| AT13-18PB-BM03BK | Amphenol Sine Systems | AUTOMOTIVE CONN, R/A RCPT, 18POS, 13A; Product Range:Boardlock AT Series; Automotive Connector Shell Style:Right Angle Panel Mount Receptacle; No. of Contacts:18Contacts; Automotive Contact Type:PCB Pin; Contact Material:Copper AlloyRoHS Compliant: Yes RoHS : Compliant |
| 130 | ||
| MAX3182EEUK+T | Analog Devices Inc | RS232 RECEIVER, 1.5MBPS, -40 TO 85DEG C; RoHS : Compliant |
| 105 | ||
| MAX3182EEUK+T | Analog Devices Inc | RS232 RECEIVER, 1.5MBPS, -40 TO 85DEG C; RoHS : Compliant |
| 105 | ||
| MS318110NWL | Amphenol PCD | DUST COVER W/ CHAIN & RING, SIZE 10/RCPT; Accessory Type:Protective Cap with Chain & Ring; For Use With:Amphenol MIL-DTL-26482 Series I & II Circular Receptacles; Connector Body Material:Aluminum Alloy Body; Product Range:- RoHS : Not Compliant |
| 100 | ||
| AT13-18PB-BM03BK | Amphenol Sine Systems | AUTOMOTIVE CONN, R/A RCPT, 18POS, 13A; RoHS : Compliant |
| 62 | ||
| MS318114RA | Amphenol PCD | DUST COVER W/ SS ROPE, SIZE 14, RCPT; Accessory Type:Protective Cap with SS Rope; For Use With:Amphenol MIL-DTL-26482 Series I & II Circular Receptacles; Connector Body Material:Aluminum Alloy Body; Product Range:- RoHS : Not Compliant |
| 3 | ||
| 318 | Wiremold | EXTERNAL ELBOW DUCT FITTING; Raceway / Duct Material:PVC (Polyvinylchloride); Raceway / Duct Color:Ivory; External Length:-; External Width:12.7mm; External Height:8.89mm; Product Range:300 Series; Body Material:PVC; Colour:Ivory RoHS Compliant: No RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX6318LHUK46CY+T | Analog Devices Inc | 5-Pin µP Supervisory Circuits RoHS : Compliant |
| 15,465 | |
| MAX31875R7TZS+T | Analog Devices Inc | Tiny I2C Temperature Sensor in RoHS : Compliant |
| 15,283 | ||
| MAX31865ATP+ | Analog Devices Inc | RTD to Digital Converter RoHS : Compliant |
| 3,661 | ||
| MAX3180EEUK+ | Analog Devices Inc | ±15kV ESD-Protected, 0.5µA, +3 RoHS : Compliant | 3,351 | |||
| MAX31855EASA+ | Analog Devices Inc | Cold-Junction Compensated Ther RoHS : Compliant |
| 1,377 | ||
| MAX3182EEUK+T | Analog Devices Inc | ±15kV ESD-Protected, 0.5µA, +3 RoHS : Compliant |
| 882 | ||
| MAX31850TATB+ | Analog Devices Inc | 1-WIRE THRMOCPLE TO DIG CONV T RoHS : Compliant |
| 452 | ||
ADP320ACPZ331815R7![]() | Analog Devices Inc | 200mA LDO 3.3Vo1, 1.8Vo2, 1.5V RoHS : Compliant |
| 131 | ||
| DC1318A | Analog Devices Inc | LTC3611EWP - 10A (Iout), 32V S |
| 16 | ||
| MAX31827EVSYS1# | Analog Devices Inc | EVAL System Kit for MAX31827,L RoHS : Compliant |
| 8 | ||
| MAX31827EVKIT# | Analog Devices Inc | EVAL Kit for MAX31827, Low-Pow RoHS : Compliant |
| 7 | ||
| MAX7318EVKIT+ | Analog Devices Inc | Eval Kit MAX7318 (2-Wire-Inter |
| 5 | ||
| MAX3186CAP+ | Analog Devices Inc | ±15kV ESD-Protected, EMC Compl RoHS : Compliant |
| 0 | ||
| MAX7318AWG+T | Analog Devices Inc | 2-Wire-Interfaced, 16-Bit, I/O RoHS : Compliant |
| 0 | ||
| MAX3189EEUT+ | Analog Devices Inc | ±15kV ESD-Protected, 1Mbps, 1µ RoHS : Compliant | 0 | |||
![]() NXP Semiconductors | NAFE13188B40BSMP | NXP Semiconductors | Universal ±25 V 8-Input High Speed AFE, Reel 13" Q2/T3 in Drypack RoHS : Compliant |
| 1,998 | |
| EVBMA7318-TPL | NXP Semiconductors | , RoHS : Not Compliant |
| 10 | ||
| OM13318,598 | NXP Semiconductors | NVT2002DP Demo Board, RoHS : Not Compliant |
| 0 | ||
| EVBMA7318-SPI | NXP Semiconductors | , RoHS : Not Compliant |
| 0 | ||
![]() Bisco Industries | 2318-2-00-50-00-00-07-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 4,000 | ||
| 318-18-010-00-000000 | Mill-Max Mfg Corp | 1,110 | ||||
| GP3-187X1250-14 | Groov-Pin Corporation | 964 | ||||
| 7318 | Keystone Electronics Corp | RoHS : Compliant | 400 | |||
| 9318-A-194-17 | Amatom Electronic Hardware | 397 | ||||
| E3-18-15 | Southco | 371 | ||||
| 110-83-318-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 286 | |||
| MS9318-113 | MS Rivets | 231 | ||||
| SS3-1812 | ondrives.us | 50 | ||||
| NAS6603-18 | NAS Bolts | 43 | ||||
| MS21318-30 | MIL-SPEC Screws | 30 | ||||
| P114103-1.87-SS-SDS-12 | Accurate Screw Machine | 25 | ||||
| MS9318-050 | MS Rivets | 17 | ||||
| NAS43DD3-184FC | NAS SPACERS/STANDOFFS/HANDLES | 10 | ||||
| MS51933-18 | MS Pins | 5 | ||||
![]() Rochester Electronics | MAX3180EEUK+ | Analog Devices Inc | ±15kV ESD-Protected, 0.5µA, +3V to +5.5V RoHS : Compliant | 321 | ||
ADR318ARJ-R2![]() | Analog Devices Inc | Precision Low Drift Voltage Reference with Shutdown RoHS : Not Compliant |
| 8,025 | ||
MAX3318ECDBR![]() | Texas Instruments | Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, PDSO20 RoHS : Compliant |
| 14,735 | ||
LM318P![]() | Texas Instruments | Op Amp Standard 15MHz 8-DIP Tube RoHS : Compliant | 570 | |||
MAX3318CPW![]() | Texas Instruments | IC INTERFACE Transceiver RS232 460kbps 2.25V - 3V 20-SOP Tube RoHS : Compliant |
| 9,800 | ||
CY7C1318CV18-200BZI![]() | Cypress Semiconductor | DDR SRAM, 1MX18, 0.45ns, CMOS, PBGA165 RoHS : Not Compliant |
| 370 | ||
| FOD3184TV | Fairchild Semiconductor Corporation | Isolated Gate Drivers Optical Coupling 1 CH 5kVrms 8-SMD Bag RoHS : Compliant |
| 846 | ||
MC33186VW1R2![]() | Freescale Semiconductor | Half Bridge Based Peripheral Driver, 6.5A, PDSO20 RoHS : Not Compliant |
| 101,127 | ||
DS3184N![]() | Maxim Integrated Products | ATM/SONET/SDH Network Interface, 1-Func, PBGA400 RoHS : Not Compliant |
| 5 | ||
MAX3183EEUK![]() | Maxim Integrated Products | Line Receiver, 1 Func, 1 Rcvr, CMOS, PDSO5 RoHS : Not Compliant |
| 413 | ||
| MAX3189EUT | Maxim Integrated Products | Line Driver RoHS : Not Compliant |
| 1,632 | ||
MAX3318EAP![]() | Maxim Integrated Products | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO20 RoHS : Not Compliant |
| 1,620 | ||
| MIC5318-1.5YMT | Micrel Inc | Fixed Positive LDO Regulator, 1.5V, 0.2V Dropout, CMOS RoHS : Compliant |
| 4,527 | ||
| SIT8002AC-33-18E-14.31800T | SiTime Corporation | CRYSTAL OSC XO (Standard) CMOS 14.318MHz 1.62V ~ 1.98V ±50ppm 4-SMD T/R RoHS : Compliant |
| 3,000 | ||
| SIT8002AI-33-18E-14.31818T | SiTime Corporation | CMOS Output Clock Oscillator, 14.31818MHz Nom RoHS : Compliant |
| 3,000 | ||
![]() TME | 83186003 / 831860-I-FD0 | Crouzet | Microswitch SNAP ACTION; 6A/250VAC; without lever; SPDT; ON-(ON) |
| 107 | |
| 318 | MEDID | Measuring tape; L: 3m; Width: 13mm; steel; self-adhesive; measure |
| 19 | ||
| 3-1803188-3 | TE Connectivity | Tool: for crimping |
| 3 | ||
| 3-1803188-5 | TE Connectivity | Tool: for crimping; Ocean RoHS : Compliant |
| 1 | ||
| 3-1879318-7 | TE Connectivity | Encoder: incremental; THT; 12imp/revol; 5VDC; 5mA; Shaft: D spring RoHS : Compliant |
| 0 | ||
| 3-1879318-8 | TE Connectivity | Encoder: incremental; THT; 12imp/revol; 5VDC; 5mA; Shaft: D spring RoHS : Compliant |
| 0 | ||
| 3-1803188-7 | TE Connectivity | Tool: for crimping; Ocean RoHS : Compliant |
| 0 | ||
| 3-1879318-6 | TE Connectivity | Encoder: incremental; THT; 24imp/revol; Pos: 24; 5VDC; 5mA; L: 25mm RoHS : Compliant |
| 0 | ||
| 3-1879318-3 | TE Connectivity | Encoder: incremental; THT; 12imp/revol; Pos: 12; 5VDC; 5mA; L: 25mm RoHS : Compliant |
| 0 | ||
| 3-1879318-2 | TE Connectivity | Encoder: incremental; THT; 12imp/revol; Pos: 12; 5VDC; 5mA; L: 20mm RoHS : Compliant |
| 0 | ||
| 3-1803188-9 | TE Connectivity | Tool: for crimping; Ocean RoHS : Compliant |
| 0 | ||
| 7000-40531-8031800 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; 18m; 60VDC; 60VAC; 4A; Cores: 5; PUR |
| 0 | ||
| 0031.8318 | Schurter Electronic Components | Fuse: fuse; 5x20mm; glass; SMD; 1.25A; 250V; time-lag; OGN-SMD RoHS : Compliant |
| 0 | ||
| 3-1879318-1 | TE Connectivity | Encoder: incremental; THT; 12imp/revol; Pos: 12; 5VDC; 5mA; L: 15mm RoHS : Compliant |
| 0 | ||
| 3-1879318-0 | TE Connectivity | Encoder: incremental; THT; 24imp/revol; 5VDC; 5mA; Shaft: D spring RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TLV74318PDQNR3![]() | Texas Instruments | RoHS : Compliant | 225,480 | ||
REF3318AIDBZR![]() | Texas Instruments | IC VREF SERIES 1.8V SOT23-3 RoHS : Compliant | 195,286 | |||
REF3318AIDBZT![]() | Texas Instruments | REF3318AIDBZT 电压参考, 额定电压1.8V, ±0.15%精确度, 30mA, 5.5 V输入, 3针 SOT-23封装 RoHS : Compliant | 113,683 | |||
MAX3318IDBR![]() | Texas Instruments | IC TXRX RS-232 460KBPS 20-SSOP RoHS : Compliant | 63,979 | |||
REF3318AIDCKR![]() | Texas Instruments | SC70-3/A°/3/MICRO POWER REFERENCE 1.8 VOLT OPERATION RoHS : Compliant | 57,276 | |||
MAX3318EIPWR![]() | Texas Instruments | IC RS232 2.5V IEC ESD 20-TSSOP RoHS : Compliant | 45,876 | |||
REF3318AIDBZTG4![]() | Texas Instruments | IC VREF SERIES 1.8V SOT23-3 RoHS : Compliant | 41,500 | |||
TPS79318DBVR![]() | Texas Instruments | ULTRALOW-NOISE,LOW-DROPOUT LINEAR REGULATORS RoHS : Compliant | 9,000 | |||
TLV73318PQDRVRQ1![]() | Texas Instruments | RoHS : Compliant | 6,391 | |||
CSD17318Q2![]() | Texas Instruments | RoHS : Compliant | 6,000 | |||
TLV713185PDQNR![]() | Texas Instruments | IC REG LDO 1.85V 0.15A 4X2SON RoHS : Compliant | 3,000 | |||
TPS76318DBVR![]() | Texas Instruments | Low-Power 150-mA Low-Dropout Linear Regulators RoHS : Compliant | 3,000 | |||
| BD5318G-2CGTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU4318G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
![]() ComSIT USA | IPT318116N | Glenair Inc | AVAILABLE EU | 17 | ||
| 13181251 | TYCO/TE CONNECTIVITY | AVAILABLE EU | 5 | |||
| ABM81431818MHZB2T | Abracon Corporation | AVAILABLE EU | 422 | |||
| GXO7531143181MHZ | Golledge Electronics Ltd | AVAILABLE EU | 374 | |||
| 13181262 | TE Connectivity | AVAILABLE EU | 12 | |||
| 13181252 | TE Connectivity | AVAILABLE EU | 27 | |||
| Q14318180JXG75P2123050T1LF | Jauch Quartz America | AVAILABLE EU | 9,557 | |||
| 5031821852 | Molex | AVAILABLE EU RoHS : Compliant | 4,260 | |||
| VTVS47ASMFHM318 | AVAILABLE EU | 292,500 | ||||
| 113181194 | TE Connectivity | AVAILABLE EU | 8 | |||
| ECS1773184XEN | ECS International Inc | AVAILABLE EU | 26 | |||
| 318231 | AVAILABLE EU | 1,385 | ||||
| CRCW060318K2FKEA | VISHAY INTERTECHNOLOGY INC | AVAILABLE EU | 455 | |||
TLV73318PDBVR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 929 | |||
TPS767D318PWP![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 38 | |||
![]() ComSIT USA | BZX384B2V4E318 | Vishay Intertechnologies | Zener Diode, 2.4V V(Z), 2%, 0.2W, Silicon, Unidirectional RoHS : Not Compliant | 40,000 | ||
| 1N4148WHE318 | Vishay Intertechnologies | Rectifier Diode, 1 Phase, 1 Element, 0.15A, 100V V(RRM), Silicon RoHS : Compliant | 20,000 | |||
| BZX84B3V9E318 | Vishay Intertechnologies | Zener Diode, 3.9V V(Z), 2%, 0.5W, Silicon, Unidirectional RoHS : Not Compliant | 10,000 | |||
| BZT52C6V8HE318 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 6.8V V(Z), 5.88%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| VS1EFH01WM318 | Vishay Intertechnologies | HYPERFAST RECTIFIER, 1 A FRED PT Rectifier Diode, 1 Phase, 1 Element, 1A, 100V V(RRM), Silicon, DO-219AB RoHS : Compliant | 10,000 | |||
| MMSZ4702E318 | Vishay Intertechnologies | Zener Diode, 15V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 9,314 | |||
| BZG03C150HM318 | Vishay Intertechnologies | Zener Diode, 150V V(Z), 6.12%, 1.25W, Silicon, Unidirectional, DO-214AC RoHS : Compliant | 2,860 | |||
| 318791262 | TE Connectivity | Fixed Resistor, Thin Film, 0.063W, 143ohm, 25V, 0.1% +/-Tol, 10ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 2,000 | |||
| CC1AT1A14318180MHZ20TR | Micro Crystal AG | Electronic Component RoHS : Compliant | 2,000 | |||
| BP506S034318 | specialty? | Electronic Component RoHS : Not Compliant | 1,900 | |||
| 284318E | TE Connectivity | Conn DIN 41612 F 20 POS 2.54mm Solder RoHS : Compliant | 1,640 | |||
| ML318S | ml | Electronic Component RoHS : Not Compliant | 999 | |||
| RF3186 | Amphenol RF | Electronic Component RoHS : Not Compliant | 541 | |||
| MAX31865ATP+ | Maxim Integrated Products | Analog Circuit, 1 Func RoHS : Compliant | 146 | |||
| MP318I | Texas Instruments | Electronic Component RoHS : Compliant | 14 | |||
![]() GLYN GmbH & Co. KG | B73180A0101M062 | TDK Corporation | CeraCharge, Rechargeable Multilayer Ceramic Chip RoHS : Compliant | 12 | ||
![]() Interstate Connecting Components | 3-1803187-0 | TE Connectivity | INSULATION CRIMPER RoHS : Compliant |
| 0 | |
| 3-1879318-7 | TE Connectivity | DP16 VER 12P NDET 15F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1879131-8 | TE Connectivity | RN 0402 7K87 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| 3-1803318-6 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 0 | ||
| 3-1879318-8 | TE Connectivity | DP16 VER 12P NDET 20F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1803188-7 | TE Connectivity | CRIMPER, WIRE F RoHS : Compliant |
| 0 | ||
| 3-1879318-6 | TE Connectivity | DP16 HOR 24P 24DET 25F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1879318-3 | TE Connectivity | DP16 HOR 12P 12DET 25F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1879318-2 | TE Connectivity | DP16 HOR 12P 12DET 20F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1803318-4 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 0 | ||
| 447HS318Z12318-5 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 3-1879318-1 | TE Connectivity | DP16 HOR 12P 12DET 15F M9*5MM RoHS : Compliant |
| 0 | ||
| 3-1879318-0 | TE Connectivity | DP16 HOR 24P NDET 25F M9*5MM RoHS : Compliant |
| 0 | ||
| 43-18318 | Conec Corporation | SAL-12D-RS4.2-RS4.2-0,25G6 | 0 | |||
| 3-1803188-0 | TE Connectivity | CRIMPER, WIRE F RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | 742083182J | CTS Corporation | 10,924 | |||
| CRCW0603181JT | Vishay Dale | RoHS : Unknown | 10,000 | |||
| PFCW1206LF03-1822F | TT Electronics Resistors | 2,999 | ||||
| 103185-2 | TE Connectivity | RoHS : Not Compliant | 2,995 | |||
| 766163181G | Bourns Inc | 1,675 | ||||
| ADR318ARJZ | Analog Devices Inc | 533 | ||||
| DSM-318-E-09-P-F-FB-MJ | Samtec Inc | RoHS : Unknown | 157 | |||
RSF200JB-73-180R![]() | YAGEO Corporation | RoHS : Compliant | 111 | |||
| 0031.8221 | Schurter Electronic Components | RoHS : Compliant | 51 | |||
| 561-8318 | 50 | |||||
ADM6318CZ28ARJZ-R7![]() | Analog Devices Inc | RoHS : Compliant | 40 | |||
| 1-531803-8 | TE Connectivity | RoHS : Not Compliant | 20 | |||
| 3131810622-0G44 | METZ CONNECT USA | RoHS : Compliant | 20 | |||
| ZN03181 | 7 | |||||
| SI2318CDS-T1-GE3 | Vishay Huntington | 7 | ||||
![]() PEI Genesis | AT13-18PB-BM03BK | Amphenol Sine Systems |
| 0 | ||
| AT13-18PE-BM02BK | Amphenol Sine Systems |
| 0 | |||
| M85049/23-18Z | Amphenol PCD |
| 0 | |||
| M85049/53-18W | Amphenol PCD |
| 0 | |||
| M85049/53-18W | SOURIAU-SUNBANK |
| 0 | |||
| PHG.3K.318.CLLK11 | LEMO connectors | RoHS : Compliant |
| 0 | ||
| FGG.2B.318.CLAD92 | LEMO connectors | RoHS : Compliant |
| 0 | ||
| FGG.2B.318.CYCD82Z | LEMO connectors | RoHS : Compliant |
| 0 | ||
| FGG.3B.318.CLAD62 | LEMO connectors | RoHS : Compliant |
| 0 | ||
| FGG.3B.318.CYCD12 | LEMO connectors | RoHS : Compliant |
| 0 | ||
| MS3180-14CL | Amphenol PCD |
| 0 | |||
| MS3180-20RLL | Amphenol PCD |
| 0 | |||
| MS3181-14CK | Amphenol PCD |
| 0 | |||
| MS3181-14CWL | Amphenol PCD |
| 0 | |||
| MS3181-16CAL | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | MTSW-104-08-T-D-318 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,208 | |
| HTSW-103-18-L-D | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 906 | ||
| MTMM-124-05-G-D-318 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 117 | ||
| HMTSW-114-22-T-S-318-RA | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 113 | ||
| MTSW-136-12-G-S-318 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 94 | ||
| MTSW-136-13-T-S-318 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 71 | ||
| M85049/23-18Z | Glenair Inc | ACCESSORIES - RFI/EMI NON-ENV ADAPTER RoHS : Compliant |
| 22 | ||
| M85049/53-18W | Amphenol PCD | Connector |
| 15 | ||
| 3-1803188-7 | TE Connectivity | CRIMPER, WIRE F RoHS : Compliant |
| 3 | ||
| 3-1803188-3 | TE Connectivity | Tools |
| 2 | ||
| 3-1803187-0 | TE Connectivity | INSULATION CRIMPER RoHS : Compliant |
| 1 | ||
| 3-1803188-5 | TE Connectivity | Connectors RoHS : Compliant |
| 1 | ||
| 3-1803188-9 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| 3-1803318-7 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 1 | ||
| 3-1803187-2 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
![]() PUI | 12.87318 | 8,000 | ||||
| 4973-18MHB-V0 | 3,000 | |||||
| 8003-18T3U | Oupiin | 1,872 | ||||
| 353180 | 218 | |||||
| 153180-W | 200 | |||||
| 153180 | 140 | |||||
| 12.94318 | 93 | |||||
| 4973-18TSB | 50 | |||||
| 083-185-RFX | 25 | |||||
| 08318-0 | 20 | |||||
| 153180-BP | 15 | |||||
| 353180-BP | 12 | |||||
| AX101318 | 4 | |||||
| 318BT | 1 | |||||
![]() Richardson RFPD | RF179-72SP1-74SP3-1800 | Samtec Inc | Cable AssemblyCoaxial 1.8m 30AWG MCX to BNC PL-PL RoHS : Compliant | 5 | ||
| 935318318528 | NXP Semiconductors | MCU 32-bit ARMCortex M0+ RISC 256KB Flash 1.8V/2.5 RoHS : Compliant | 0 | |||
| 935318318557 | NXP Semiconductors | MCU 32-bit ARMCortex M0+ RISC 256KB Flash 1.8V/2.5 RoHS : Compliant | 0 | |||
| BMR4904318/033 | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant |
| 0 | ||
| R113181020 | Radiall | Conn MCX PL 0Hz to 6GHz 50Ohm Crimp RA Cable Mount RoHS : Compliant |
| 0 | ||
| LD431850 | Powerex Power Semiconductors | SCR Module Diode 1800V 900A(RMS) 17000A 7-Pin RoHS : Compliant | 0 | |||
| LFTCXO056318BULK | IQD Frequency Products | Osc TCXO/VCTCXO RoHS : Compliant | 0 | |||
| CN-BM73-18-ND3G-75 | Amphenol Corporation | Conn BNC 0Hz to 4GHz 75Ohm Crimp ST Cable Mount PL RoHS : Compliant |
| 0 | ||
| R143182000 | Radiall | Conn TNC 0Hz to 11GHz 50Ohm Crimp RA Cable Mount P RoHS : Compliant |
| 0 | ||
| 9033-18F | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 3186FE332T150AMA1 | Knowles CDE | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| 318867-1 | TE Connectivity | Anvil, 2mm HM 8-Row RoHS : Not Compliant | 0 | |||
| TRU-13181-01 | Winchester Interconnect | RF CUSTOM CABLE ASSY RoHS : Compliant | 0 | |||
| 142-1731-846 | Cinch Connectivity Solutions | 142-1731-846 RoHS : Compliant | 0 | |||
| R143186210W | Radiall | Conn TNC 0Hz to 11GHz 50Ohm Crimp RA Cable Mount P RoHS : Not Compliant | 0 | |||
![]() Rutronik | RC0402FR-1318KL | YAGEO Corporation | RC0402 18K 1% 0,063W TK100 RoHS : Compliant |
| 2,620,000 | |
| RC1206FR-13180RL | YAGEO Corporation | RC1206 180R 1% 0,25W TK100 RoHS : Compliant |
| 240,000 | ||
| AC0603JR-1318RL | YAGEO Corporation | AC0603 18R 5% 0,1W AUTOMO RoHS : Compliant |
| 80,000 | ||
| BZX84B18-E3-18 | Vishay Intertechnologies | Z-DIODE 0,35W 18V 2% SOT23 RoHS : Compliant |
| 60,000 | ||
BZD27C5V6P-E3-18![]() | Vishay Intertechnologies | Z-DIODE 0,8W 5,6V 5% SMF RoHS : Compliant |
| 20,000 | ||
| 110-87-318-41-001101 | PRECI-DIP SSA | 18P DIL SOCKET 300 MIL RoHS : Compliant |
| 15,576 | ||
| 0031.8211 | Schurter Electronic Components | 0031.8211.BF FUSEHOLDER RoHS : Compliant |
| 12,300 | ||
| AZ23C2V7-E3-18 | Vishay Intertechnologies | ZENER DIODE 0,5W 2,7V 5% SOT-23 RoHS : Compliant |
| 10,000 | ||
| 0031.8201.G | Schurter Electronic Components | 0031.8201 FUSEHOLDER OGN RoHS : Compliant |
| 7,000 | ||
RF0318-000![]() | Littelfuse Inc | SMD100F-2 1.1A 30V Resettable RoHS : Compliant |
| 6,000 | ||
| CFR100JT-73-180R | YAGEO Corporation | CFR100 180R 5% 1W RoHS : Compliant |
| 5,000 | ||
| RJLSE4318101T | Amphenol Communications Solutions | RJ45 Modular_Jack 1Port SMT Shielded RoHS : Compliant |
| 3,150 | ||
| 1301.9318 | Schurter Electronic Components | TACT SMT 6x6x8MM 1,6N RoHS : Compliant |
| 2,000 | ||
| 901303318 | Molex | 18P PCB HEARDER C GRID III RoHS : Compliant |
| 960 | ||
| 0031.8374 | Schurter Electronic Components | OGN-SMD FUSE HOLDER+Fuse 5A RoHS : Compliant |
| 400 | ||
![]() Chip 1 Exchange | SQ2318AES-T1-GE3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 259,250 | ||
| 31880- | TE Connectivity | INSTOCK | 49,520 | |||
| SQ2318AES-T1_GE3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 42,300 | |||
| RJE23-188-3116-T | Amphenol Corporation | INSTOCK | 19,006 | |||
| CR0603-1823FTR | Samsung Electro-Mechanics | INSTOCK | 4,520 | |||
LM318P![]() | Texas Instruments | INSTOCK RoHS : Compliant | 2,021 | |||
| MC33186VW1R2 | NXP Semiconductors | INSTOCK | 1,337 | |||
| NKG3184ANKG3184A | Nihon Dempa Kogyo Co Ltd | INSTOCK | 1,221 | |||
| MAX31865ATP+ | Analog Devices Inc | INSTOCK RoHS : Compliant | 1,000 | |||
| 103318050 1/2-S 180R | INSTOCK | 800 | ||||
| MM5318N | INSTOCK | 541 | ||||
| D3183110 | INSTOCK | 139 | ||||
| C13/18PF | INSTOCK | 33 | ||||
| MP8318 | INSTOCK | 13 | ||||
| 105318-10 | OMRON Corporation | INSTOCK | 10 | |||
![]() Avnet Silica | AP7343-18FS4-7B | Diodes Incorporated | (Alt: AP7343-18FS4-7B) RoHS : Compliant | 10,000 | ||
| FOD3180TV | onsemi | 2 A Output Current High Speed MOSFET Gate Driver Optocoupler ONSSPCISTNJZ8E4V (Alt: FOD3180TV) RoHS : Compliant | 7,000 | |||
| FOD3184SDV | onsemi | 3A Output Current High Speed MOSFETIGBT Gate Driver Optocoupler ONSSPCISTNJZ8E4V (Alt: FOD3184SDV) RoHS : Compliant | 5,000 | |||
| VIPER318HDTR | STMicroelectronics | AC to DC Switching Converter Flyback 425V 145kHz 16Pin SOICN TR (Alt: VIPER318HDTR) RoHS : Compliant | 5,000 | |||
| AP7353-18FS4-7 | Diodes Incorporated | LDO Regulator with Enable Positive 18V 250mA 4Pin X2DFN TR (Alt: AP7353-18FS4-7) RoHS : Compliant | 5,000 | |||
| AP7345D-3318RH4-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 17 V to 525 V Dual Output 220 mV Drop 300 mV Drop 33 V 18 V 300 mA 8 Pins X2DFN (Alt: AP7345D-3318RH4-7) RoHS : Compliant | 5,000 | |||
| VIPER318LDTR | STMicroelectronics | AC to DC Converter Energy Saving Offline FlybackBuckBuck Boost 60kHz 800V 850mA 16Pin SOIC TR (Alt: VIPER318LDTR) RoHS : Compliant | 2,500 | |||
| VIPER318XDTR | STMicroelectronics | ACDC ConverterFlyback 85 V to 265 VAC In 19 W NSOIC16 (Alt: VIPER318XDTR) RoHS : Compliant | 2,500 | |||
| AP7363-18D-13 | Diodes Incorporated | LDO Regulator Pos 18V 15A 3Pin TO252 TR (Alt: AP7363-18D-13) RoHS : Compliant | 2,500 | |||
| FOD3180SDV | onsemi | 2 A Output Current High Speed MOSFET Gate Driver Optocoupler ONSSPCISTNJZ8E4V (Alt: FOD3180SDV) RoHS : Compliant | 1,000 | |||
| FOD3184TV | onsemi | 3A Output Current High Speed MOSFETIGBT Gate Driver Optocoupler ONSSPCISTNJZ8E4V (Alt: FOD3184TV) RoHS : Compliant | 0 | |||
| HS4-3182-8 | Renesas Electronics Corporation | (Alt: HS4-3182-8) RoHS : Not Compliant | 0 | |||
| R5F52318BDFM#10 | Renesas Electronics Corporation | (Alt: R5F52318BDFM#10) RoHS : Compliant | 0 | |||
| R5F52318ADLA#YJ1 | Renesas Electronics Corporation | (Alt: R5F52318ADLA#YJ1) RoHS : Compliant | 0 | |||
| RAA2231824GSP#MA0 | Renesas Electronics Corporation | AC DC Off Line Converter Flyback 10 V to 24 V Isolated 11 W 13 Pins SOIC (Alt: RAA2231824GSP#MA0) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPDBXRS-14.31818T | Abracon Corporation |
| 0 | ||
| AMMLPEAVRS-14.31818T | Abracon Corporation |
| 0 | |||
| AMMLPVBVJS-14.31818T | Abracon Corporation |
| 0 | |||
| AMMLPDAXCS-14.31818T | Abracon Corporation |
| 0 | |||
ABLS-14.31818MHZ-L4Q-T![]() | Abracon Corporation | CRYSTAL 14.31818MHZ 18PF SMD RoHS : Unknown |
| 0 | ||
ABM3B-14.31818MHZ-10-B-1-U-T![]() | Abracon Corporation | CRYSTAL 14.31818MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
ASFL1-14.31818MHZ-EK-T![]() | Abracon Corporation | XTAL OSC XO 14.31818MHZ HCMOS RoHS : Compliant |
| 0 | ||
ABLS7M2-14.31818MHZ-D2Y-T![]() | Abracon Corporation | CRYSTAL 14.31818MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPEAXRS-14.31818T | Abracon Corporation |
| 0 | |||
| AMMLPAAVJS-14.31818T | Abracon Corporation |
| 0 | |||
ASPI-7318-2R2M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-7318-6R8M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPABLRS-14.31818T | Abracon Corporation |
| 0 | |||
| AMMLPEBXJS-14.31818T | Abracon Corporation |
| 0 | |||
| AMMLPVBLCS-14.31818T | Abracon Corporation |
| 0 | |||
![]() DB Roberts | 7318 | Heyco | 7318-001 (TVR-138) |
| 32,000 | |
| 7318 | Keystone Electronics Corp | TERMINAL LUG RoHS : Compliant |
| 2,188 | ||
| SMTSOB-3.1-8ET | PennEngineering (PEM) |
| 1,125 | |||
| 318 | Avdel | M3X16.DIN 965. CSK.PH. FZB | 0 | |||
| BSO4-3.5M3-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as 1 | 0 | |||
| GR3183A | Essentra Components | GROMMETSSBR BLACK 60D | 0 | |||
| E3-18-15 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| FF31880A | Essentra Components | FULL FACE FLANGE PROTECTORPE F | 0 | |||
| M1318-3005-A | RAF Electronic Hardware | 0 | ||||
| 3318F | Heyco | CC L 500-170 V0 NATURAL | 0 | |||
| 30403182 | Essentra Components | CAM WITHOUT STOPPER -3MM HEIGH | 0 | |||
| 12015318 | Avdel | TRM01345 PB3400 ADAPTOR | 0 | |||
| 301318141556 | Essentra Components | 0 | ||||
| 30403183 | Essentra Components | 0 | ||||
| R4-10-31-801-10 | Southco | R4-10-31-801-10 | 0 | |||
![]() ECCO | 97J93-18-0 | Fujikura America Inc |
| 3,000 | ||
| C10-731821-050 | Amphenol Industrial Operations |
| 50 | |||
| MS318114NA | Amphenol PCD |
| 8 | |||
| JANMS3181-14N-A | Amphenol PCD |
| 8 | |||
| JANMS3181-18C-A | Amphenol PCD |
| 1 | |||
| 351-0318-000 | ITT Interconnect Solutions |
| 1 | |||
| 3510318000 | ITT Interconnect Solutions |
| 1 | |||
| MS318118CA | Amphenol PCD |
| 1 | |||
![]() Flip Electronics | FDMF3180 | onsemi | Stock, Ship Today RoHS : Compliant | 198,849 | ||
| FOD3184 | onsemi | Stock, Ship Today RoHS : Compliant | 19,923 | |||
| FOD3184V | onsemi | Stock, Ship Today RoHS : Compliant | 6,990 | |||
| FOD3180 | onsemi | Stock, Ship Today RoHS : Compliant | 5,781 | |||
| R5F52318BGFP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 4,695 | |||
| R5F52318BGND#20 | Renesas Electronics Corporation | Stock RoHS : Compliant | 4,475 | |||
| R5F56318DDFP#V0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 2,076 | |||
| FOD3184TV | onsemi | Stock, Ship Today RoHS : Compliant | 2,000 | |||
| FAN3181TMX | onsemi | Stock, Ship Today RoHS : Compliant | 1,665 | |||
| FOD3182TV | onsemi | Stock, Ship Today RoHS : Compliant | 1,185 | |||
| FOD3182S | onsemi | Stock, Ship Today RoHS : Compliant | 810 | |||
| R5F52318BDFP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 709 | |||
| R5F52318AGNE#20 | Renesas Electronics Corporation | Stock RoHS : Compliant | 577 | |||
DF2318VF25V![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 188 | |||
| CY7C1318KV18-300BZXC | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 136 | |||
![]() Pasternack Enterprises US | PE3C5318-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MMCX Plug to TNC Female Bulkhead Cable 24 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug to TNC female bulkhead cable 24 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to TNC female bulkhead cable 24 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and TNC bulkhead cable connection on the other. Our MMCX to TNC cable assembly has plug gender on end 1 and female on end 2. PE3C5318-24 can also be known as a MMCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MMCX male to TNC jack cable assembly PE3C5318-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C5318-24 RF cable are available on our downloadable PDF datasheet.PE3C5318-24 can also be used in the other direction and will be TNC female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to TNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements. |
| 335 | |
| PE3C6318-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Female to QMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum N female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and QMA cable connection on the other. Our low PIM N type to QMA cable assemblies have a female gender on end 1 and male on end 2. PE3C6318-12 can also be known as a low PIM type N jack to QMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to QMA plug cable assembly PE3C6318-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type female to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6318-12 can also be used in the other direction and will be QMA male to type N female cable assembly if the opposite connectivity is required. Low PIM type N jack to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax. |
| 62 | ||
| PE3189LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Cable 48 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3189LF-48, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3189LF-48 is built with RG142 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG142 coax, RoHS. |
| 56 | ||
| PE3FCA318-30M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm LSZH, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA318-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 6-fiber cable assembly is equipped with LC/APC to SC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA318-30M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 45 | ||
| PE3W15363-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly mini SMP female to SMA male cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W15363-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has a between series connection. Our Mini SMP female to SMA male cable has a maximum VSWR of 1.5:1. Mini SMP jack to SMA plug cable assembly PE3W15363-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15363-18 can also be used in the other direction and will be a SMA male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 2 | ||
| PE3181-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMB Plug Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMB plug cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3181-60, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3181-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3181-60 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 60 inch length using RG142 coax. |
| 0 | ||
| PE3185LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 60 inches. 7/16 DIN Male to 7/16 DIN Male Cable 60 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3185LF-60, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3185LF-60 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG214 coax, RoHS. |
| 0 | ||
| PE3188-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Cable 36 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA male to SMA female cable 36 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 36 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3188-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3188-36 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3188-36 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 36 inch length using PE-047SR coax. |
| 0 | ||
| PE3188LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Cable 12 Inch Length Using PE-047SR Coax, RoHS., Radio frequency assembly SMA male to SMA female cable 12 inch length using PE-047SR coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 12 inch length using PE-047SR coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3188LF-12, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3188LF-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3188LF-12 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 12 inch length using PE-047SR coax, RoHS. |
| 0 | ||
| PE3318LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to N Male Cable 48 Inch Length Using PE-P195 Coax, RoHS., Radio frequency assembly SMA male to N male cable 48 inch length using PE-P195 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 48 inch length using PE-P195 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3318LF-48, can also be known as a SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3318LF-48 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3318LF-48 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 48 inch length using PE-P195 coax, RoHS. |
| 0 | ||
| PE34733-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 2.92mm Male to 2.92mm Male Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 18 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE34733-18, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE34733-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 18 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3C3188-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 10-32 Male to BNC Female Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our low loss 10-32 to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3C3188-12 can also be known as a low loss 10-32 plug to BNC jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC jack cable assembly PE3C3188-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency 10-32 male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3188-12 can also be used in the other direction and will be BNC female to 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male to BNC female low loss cable 12 inch length using PE-C100-LSZH coax. |
| 0 | ||
| PE3C3188/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 10-32 Male to BNC Female Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly 10-32 male to BNC female low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 10-32 male to BNC female low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 10-32 cable connection on one end and a BNC cable connection on the other. Our low loss 10-32 to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3188/HS-36 can also be known as a low loss 10-32 plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3188/HS-36 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our 10-32 male to BNC female cable has a maximum VSWR of 1.4:1. 10-32 plug to BNC jack cable assembly PE3C3188/HS-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3188/HS-36 can also be used in the other direction and will be a BNC female to 10-32 male cable assembly if the opposite connectivity is required. Low loss 10-32 plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W23180 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male to QD QMA Male Cable Using LMR-240-UF Coax. PE3W23180 is a SMA male to QMA male cable using LMR-240-UF coax. This Pasternack SMA male to QMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm QMA for connector 2. Our male SMA to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23180 SMA male to QMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C11318 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SSMA Male to SSMA Female Bulkhead Cable Using PE-SR047FL Coax. PE3C11318 is a SSMA male to SSMA female bulkhead cable using PE-SR047FL coax. This Pasternack SSMA male to SSMA female bulkhead cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SSMA to female SSMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C11318 SSMA male to SSMA female bulkhead cable assembly is constructed with PE-SR047FL coax. | 0 | |||
![]() TE Connectivity | 1318107-1 | TE Connectivity | DYNAMIC D-2000 REC CONT M L/P Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Size: 22 – 18 AWG Operating Voltage: 250 VAC Wire Size: .34 – .86 mm² Gold (Au) Receptacle 22 – 18 AWG 250 VAC | Contact: Component To Wire;5A & 28-18 Wire Size & Gold Plated | Part Number: 1318107-1 | Internal Number: 1318107-1 | TE Connectivity RoHS : Compliant |
| 36,956 | |
| 8-31890-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Closed Ring Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-31890-1 | Internal Number: 8-31890-1 | TE Connectivity RoHS : Compliant |
| 7,122 | ||
| 3-1318120-3 | TE Connectivity | DYNAMIC D-2 REC HSG 3P Z-KEY Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 2.5 Mm Pitch & 250V | 3 Receptacle Housing With | Part Number: 3-1318120-3 | Internal Number: 3-1318120-3 | TE Connectivity RoHS : Compliant |
| 3,405 | ||
| 1318124-2 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 6P Y PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Header Assembly: Wire-To-Board & 5A & Gold Plated | Part Number: 1318124-2 | Internal Number: 1318124-2 | TE Connectivity RoHS : Compliant |
| 2,524 | ||
| 6318573-4 | TE Connectivity | PLUG ASSY (REVERSE SEQUENTIAL PIN),2.5MM Connector System: Board-to-Board Number of Positions: 7 Centerline (Pitch): .098 in Centerline (Pitch): 2.5 mm Connector & Housing Type: Plug Board-to-Board 7 .098" 2.5 mm | Dc Jack Connector | Part Number: 6318573-4 | Internal Number: 6318573-4 | .098" | TE Connectivity RoHS : Compliant |
| 2,502 | ||
| 2-1318119-4 | TE Connectivity | DYNAMIC D2100 REC HSG 8P DBL Y Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 2.5 Mm Pitch & 250V | 8 Receptacle Housing With | Part Number: 2-1318119-4 | Internal Number: 2-1318119-4 | TE Connectivity RoHS : Compliant |
| 1,963 | ||
| 2331814-7 | TE Connectivity | CABLE REC ASSY, 84 P, RA, SLIVER 2.0 Internal I/O Connector Type: Sliver for SFF-TA-1002 Connector Mates With: Cable Plug Assembly PCB Mount Orientation: Right Angle Connector System: Cable-to-Board Industry Standard: Gen-Z Sliver for SFF-TA-1002 Cable Plug Assembly Right Angle Cable-to-Board | Internal I/o Connector | Part Number: 2331814-7 | Internal Number: 2331814-7 | TE Connectivity RoHS : Compliant |
| 1,400 | ||
| 2331814-9 | TE Connectivity | CABLE REC ASSY, 84 P, RA, SLIVER 2.0 Internal I/O Connector Type: Sliver for SFF-TA-1002 Connector Mates With: Cable Plug Assembly PCB Mount Orientation: Right Angle Connector System: Cable-to-Board Industry Standard: Gen-Z Sliver for SFF-TA-1002 Cable Plug Assembly Right Angle Cable-to-Board | Internal I/o Connector | Part Number: 2331814-9 | Internal Number: 2331814-9 | TE Connectivity RoHS : Compliant |
| 1,311 | ||
| 8-5353189-0 | TE Connectivity | .6FHR04H,140,S,STD,08/SP,TR,SEYes PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 140 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 8-5353189-0 | Internal Number: 8-5353189-0 | TE Connectivity RoHS : Compliant |
| 1,183 | ||
| 2318136-5 | TE Connectivity | TWO-PIECE POKE-IN, 8MM HEADER, 5 POS PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Component Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Board-to-Component 5 | Two-Piece Poke-In Header | Part Number: 2318136-5 | Internal Number: 2318136-5 | TE Connectivity RoHS : Compliant |
| 1,049 | ||
| 1-480318-9 | TE Connectivity | 02P CMNL PLUG HSG F/H BLK Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 1-480318-9 | Internal Number: 1-480318-9 | TE Connectivity RoHS : Compliant |
| 390 | ||
| 2318770-3 | TE Connectivity | TWO-PIECE POKE-IN, 5MM HEADER, 3 POS PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Component Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Board-to-Component 3 | Two-Piece Poke-In Header | Part Number: 2318770-3 | Internal Number: 2318770-3 | TE Connectivity RoHS : Compliant |
| 289 | ||
| 2356318-1 | TE Connectivity | SlimSAS x8 REC VERTICAL Internal I/O Connector Type: SlimSAS Connector Mates With: Cable Plug Assembly PCB Mount Orientation: Vertical Connector System: Cable-to-Board Industry Standard: SFF-8654 SlimSAS Cable Plug Assembly Vertical Cable-to-Board | Internal I/o Connector | Part Number: 2356318-1 | Internal Number: 2356318-1 | TE Connectivity RoHS : Compliant |
| 274 | ||
| 1318750-2 | TE Connectivity | 025/090 CAP ASSY 50P PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 50 Number of Rows: 3 Centerline (Pitch): 4 mm 2.2 mm Horizontal Wire-to-Board 50 3 | High Pin Count Header | Part Number: 1318750-2 | Internal Number: 1318750-2 | 4 mm | TE Connectivity RoHS : Compliant |
| 61 | ||
| 3-1318983-6 | TE Connectivity | DYNAMIC D-5200M ALPHA HDR ASSY 4P XY AG PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 2 PCB Mount Header Horizontal Wire-to-Board 4 | Header Assembly: Wire-To-Board & 20-45A & 250-630V | Part Number: 3-1318983-6 | Internal Number: 3-1318983-6 | TE Connectivity RoHS : Compliant |
| 27 | ||
![]() Teledyne HiRel | 5962-9318801MRA![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
5962-8606318UA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606318YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9318801Q2A![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8606318QYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9318801MSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8606318QXA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606318XA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9318801M2A![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-9318801QRA![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9318801QSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C0201HQN6R3-180FNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;6.3V;18pF;�1% RoHS : Compliant | 0 | ||
| C1808C0G631-820JNE | VENKEL LTD | HV Chip Capacitor;1808;C0G;630V;82pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-820KNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;82pF;�10% RoHS : Compliant | 0 | |||
| C1808X7R631-821KNE | VENKEL LTD | HV Chip Capacitor;1808;X7R;630V;820pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-820JNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;82pF;�5% RoHS : Compliant | 0 | |||
| C0201HQN6R3-180GNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;6.3V;18pF;�2% RoHS : Compliant | 0 | |||
| C1210C0G631-820JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;82pF;�5% RoHS : Compliant | 0 | |||
| C1825C0G631-822JNE | VENKEL LTD | HV Chip Capacitor;1825;C0G;630V;8200pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-821FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;820pF;�1% RoHS : Compliant | 0 | |||
| C1210X7R631-822KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;630V;8200pF;�10% RoHS : Compliant | 0 | |||
| C1812C0G631-821JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;630V;820pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-821JNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;820pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R631-822KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;8200pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-8R2CNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;8.2pF;�0.25pF RoHS : Compliant | 0 | |||
| C1812C0G631-820JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;630V;82pF;�5% RoHS : Compliant | 0 | |||
![]() Vyrian | MAX6318HUK25BW+T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, +2.5V, PDSO5 RoHS : Compliant | 11,289 | ||
| MAX6318HUK30DY+T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, +3.0V, PDSO5 RoHS : Compliant | 11,165 | |||
| MAX31851RATB | Analog Devices (Maxim Integrated) | 10,653 | ||||
| MAX3186CAP+ | Analog Devices Inc | Line Transceiver, 1 Func, 5 Driver, 3 Rcvr, BICMOS, PDSO20 RoHS : Compliant | 10,272 | |||
| MAX3188EEUT/GH9-T | Maxim Integrated Products | Line Driver, 1 Func, 1 Driver, PDSO6 RoHS : Not Compliant | 9,292 | |||
| MAX31855EVKIT | Analog Devices (Maxim Integrated) | 8,731 | ||||
| MAX31875R7TZS+T | Analog Devices Inc | Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Square, 4 Pin, Surface Mount RoHS : Compliant | 8,295 | |||
| MAX6318HUK31+ | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, +3.08V, PDSO5 RoHS : Compliant | 7,880 | |||
| MAX31865ATP+ | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 7,703 | |||
MAX3183EEUK![]() | Maxim Integrated Products | Line Receiver, 1 Func, 1 Rcvr, CMOS, PDSO5 RoHS : Not Compliant | 6,618 | |||
| 2318318 | Phoenix Contact | Cable Assembly, 10 Conductor(s), 26AWG, 60V, Flexible Cord And Fixture Wire RoHS : Compliant | 6,342 | |||
| MAX3182EEUK+T | Analog Devices Inc | Line Receiver, 1 Func, 1 Rcvr, CMOS, PDSO5 RoHS : Compliant | 6,088 | |||
| MAX3180EEUK+ | Analog Devices Inc | Line Receiver, 1 Func, 1 Rcvr, CMOS, PDSO5 RoHS : Compliant | 6,085 | |||
| MAX6318HUK29DY-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, +2.9V, CMOS, PDSO5 RoHS : Not Compliant | 5,344 | |||
| MAX6318HUK30AZ-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 1 Channel, +3.0V, CMOS, PDSO5 RoHS : Not Compliant | 5,251 | |||
![]() Win Source Electronics | SQ2318AES-T1_GE3 | Vishay Siliconix | MOSFET N-CH 40V 8A SOT23-3 |
| 225,000 | |
| AZ23C5V6-E3-18 | Vishay Huntington | DIODE ZENER ARRAY 5.6V SOT23 |
| 190,240 | ||
| BZX384B5V1-HE3-18 | Vishay Huntington | DIODE ZENER 5.1V 200MW SOD323 / Zener Diode 5.1 V 200 mW ±2% Surface Mount SOD-323 |
| 161,972 | ||
| GSOT12-E3-18 | Vishay Huntington | TVS DIODE 12V 26V SOT23 |
| 70,000 | ||
TPS79318DBVT![]() | Texas Instruments | IC REG LDO 1.8V 0.2A SOT23-5 RoHS : Compliant |
| 57,180 | ||
TPS79318DBVRG4![]() | Texas Instruments | IC REG LINEAR 1.8V 200MA SOT23-5 RoHS : Compliant |
| 56,670 | ||
TLV71318PQDBVRQ1![]() | Texas Instruments | IC REG LINEAR 1.8V 150MA SOT23-5 / TLV713P-Q1 Capacitor-Free, 150-mA, Low-Dropout Regulator With Foldback Current Limit for Portable Devices RoHS : Compliant |
| 52,505 | ||
| BSP318S H6327 | Infineon Technologies AG |
| 43,000 | |||
| SQ2318AES-T1-GE3 | Vishay Huntington |
| 21,000 | |||
| MAX31865ATP+ | Maxim Integrated Products | IC RTD TO DIGITAL CONVERT 20QFN RoHS : Compliant |
| 20,782 | ||
TLV73318PDQNR![]() | Texas Instruments | TLV733P Capacitor-Free, 300-mA, Low-Dropout Regulator | IC REG LINEAR 1.8V 300MA 4X2SON RoHS : Compliant |
| 19,660 | ||
TLV73318PDQNT![]() | Texas Instruments | IC REG LDO 1.8V 0.3A 4X2SON RoHS : Compliant |
| 19,070 | ||
| RF3189 | RF Micro Devices Inc | MOD RF AMP GPRD/EDGE 5X5MM |
| 18,541 | ||
| RK3188 | Rockchip Electronics Co Ltd |
| 4,261 | |||
| HS4-3182-8 | Intersil Corporation | ARINC 429 Bus Interface Line Driver RoHS : Not Compliant |
| 1,064 | ||
![]() Wuhan P&S | CRCW0603180KFKEAHP | Vishay Intertechnologies | CRCW0603-HP 100 180K 1% ET1 E3 RoHS : Compliant |
| 45,000 | |
| BZG05C4V7-M3-18 | Vishay Intertechnologies | Zener Diodes RoHS : Compliant |
| 6,000 | ||
| CRCW0603180KFKEA | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 5,000 | ||
| 61083-182402LF | Amphenol FCi | 180Pos,Dual Row,0.8mm,BTB Vertical Header RoHS : Compliant |
| 1,100 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |