374TCD-R Price, Reseller, Stock

FAMILY OF 550-MICRO AMPERE/CHANNEL 3-MHZ RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIER WITH SHUTDOWN Operational Amplifier, 4 Func, 4500uV Offset-Max, CMOS, PDSO14
RoHS : Compliant

1,032

7283744930

Yazaki Corp

Electronic Component
RoHS : Compliant

1,000

74LVT16374ADLT

Philips Semiconductors

3.3 V 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP; 3-STATE Bus Driver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO48
RoHS : Not Compliant

895

74LVC16374ADGGS400118

NXP Semiconductors

74LVC16374ADGG, NXP, 16-bit D-type flip-flop, 3.3V, 24-pin TSSOP package
RoHS : Compliant

657

74ACQ374PC

National Semiconductor Corporation

Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 20-DIP Tube
RoHS : Not Compliant

275

74VCX16374MTDX

Fairchild Semiconductor Corporation

Flip Flop Positive Edge 2 Element 1.5V, 1.8V, 2.5V, 3.3V 48-SOP T/R
RoHS : Not Compliant

270

2SK37481E

onsemi

Power Field-Effect Transistor
RoHS : Compliant

240

74LCX374MTC

Fairchild Semiconductor Corporation

Flip Flop Positive Edge 1 Element 2.5V, 3.3V 20-SOP Tube
RoHS : Compliant

219

74LVT16374ADL

Philips Semiconductors

3.3 V 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP; 3-STATE Bus Driver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO48
RoHS : Not Compliant

184

LT1374CS8

Linear Technology

4.5A, 500KHZ STEP-DOWN SWITCHING REGULATOR Switching Regulator, Current-mode, 8.5A, 560kHz Switching Freq-Max, BIPolar, PDSO8
RoHS : Not Compliant

LT3743EFEPBF

Linear Technology

HIGH-CURRENT SYNCHRONOUS STEP-DOWN LED DRIVER WITH THREE-STATE CONTROL Switching Controller, Current-mode, 1070kHz Switching Freq-Max, PDSO28
RoHS : Compliant

PUI

12.60374

18,000

12.94374

DB Roberts

37-41-295-60-REVL

Southco

1 : $26.4231
100 : $18.5676
500 : $14.617
1,000 : $12.0526
3,100 : $12.0526

3,100

BN6937-4

Bossard Group

1 : $0.4124
100 : $0.2898
453 : $0.2898

453

8000374

Haeger

THUMB SCREW CAPTIVATED

1 : $20.34
3 : $20.34

MP-02-103-744

Southco

MP-02-103-744

AESS37-466

PennEngineering (PEM)

3/8

4537-440-SS-20

RAF Electronic Hardware

1/4 HEX X 11/16 LEGTH

AES37-455

PennEngineering (PEM)

3/8

30374-N

RAF Electronic Hardware

17W13748

Essentra Components

FLAT WASHER, .250 ID, 1.375 OD

3745-16CNW160

HeliCoil

INS H-C M16X1.5 FINE FR CIN23

AES37-466

PennEngineering (PEM)

3/8

1637-440-N

RAF Electronic Hardware

STANDARD ROUND FEMALE-FEMALE STANDOFF,NYLON

4537-440-N

RAF Electronic Hardware

47-91-374-50

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

17W03748B

Essentra Components

FLAT WASHER, .312 ID, .375 OD,

ECCO

AE83374R2429N

Aero-Electric Connector Inc

93-830374-21S

Amphenol Industrial Operations

1 : $38.7

AE83374R1203N

Aero-Electric Connector Inc

M83723/74R1203N

Aero-Electric Connector Inc

RoHS : Not Compliant

Pasternack Enterprises US

PE3749-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using RG213 Coax., Radio frequency assembly BNC male to BNC male cable 60 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 60 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3749-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3749-60 is built with RG213 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using RG213 coax.

1 : $95.99
25 : $91.19
50 : $86.39
100 : $82.55

189

PE3FCA374-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to SC UPC, OM5 Multimode Distribution Cable, 5.6mm Riser, 2.0mm breakout, Lime Green-10M. Pasternack’s PE3FCA374-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 8-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our lime green fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA374-10M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements.

1 : $277.99
5 : $266.87
10 : $255.75
25 : $244.63

PE3W03741LF-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 2.92mm Female to 2.92mm Male Cable 60 Inch Length Using PE-047SR Coax, LF Solder., Radio frequency assembly 2.92mm female to 2.92mm male cable 60 inch length using PE-047SR coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm male cable 60 inch length using PE-047SR coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3W03741LF-60 can also be known as a 2.92mm jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to 2.92mm male cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm plug cable assembly PE3W03741LF-60 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03741LF-60 can also be used in the other direction and will be a 2.92mm male to 2.92mm female cable assembly if the opposite connectivity is required. 2.92mm jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements.

1 : $465.99
10 : $447.35
25 : $428.71
100 : $410.07

PE4374

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: C, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 11 GHz, Interface Type 1: RG214, Interface Type 2: RG9, Interface Type 3: RG225, Interface Type 4: RG393. C Female Connector Crimp/Solder Attachment 4 Hole Flange Mount for RG214, RG9, RG225, RG393, .718 inch Hole Spacing. PE4374 type C female 4 hole flange coaxial connector has an interface type of RG214, RG9, RG225, RG393 and a 50 Ohm impedance. Pasternack type C female 4 hole flange connector uses shield/contact crimp/solder as an attachment method. Our female type C coaxial connector provides a minimum frequency of DC and a maximum frequency of 11 GHz. The Pasternack type C female 4 hole flange coaxial connector has a teflon dielectric type. The Pasternack type C coaxial connector has a brass body with nickel plating. This C type female 4 hole flange coaxial RF connector is RoHS and REACH compliant. This Pasternack female type C 4 hole flange connector will ship the same day as purchased. Our 4 hole flange type C female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom C type connector cable assemblies that will ship the same day as well.

1 : $27.39
25 : $26.02
50 : $24.65
100 : $23.56

PE3C10374-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10374-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10374-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10374-48 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $123.99
25 : $119.03
50 : $115.31
100 : $112.83

PE3W07374/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm Mini SMB Plug to 75 Ohm N Male Cable 24 Inch Length Using 75 Ohm RG59 Coax with HeatShrink., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm mini SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax with heatshrink, mini SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMB cable connection on one end and N type cable connection on the other. Our mini SMB to type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W07374/HS-24 can also be known as a mini SMB male to type N plug cable assembly and will be shipped same-day as it is purchased. Mini SMB male to type N plug cable assembly PE3W07374/HS-24 is built with RG59 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to N type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this mini SMB plug to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07374/HS-24 can also be used in the other direction and will be type N male to mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB male to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to N type cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax with heatshrink.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3740/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMC Plug Right Angle to SMA Male Right Angle Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMC plug right angle to SMA male right angle cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug right angle to SMA male right angle cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and right angle SMA cable connection on the other. Our right angle SMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3740/HS-12 can also be known as a right angle SMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMC male to SMA plug cable assembly PE3740/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3740/HS-12 can also be used in the other direction and will be right angle SMA male to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMA cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMA male right angle cable 12 inch length using RG316 coax with heatshrink.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE3743-48

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. UHF Male to UHF Male Cable 48 Inch Length Using RG400 Coax., Radio frequency assembly UHF male to UHF male cable 48 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to UHF male cable 48 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE3743-48, can also be known as a UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE3743-48 is built with RG400 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 48 inch length using RG400 coax.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

PE37497

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to SC Male Cable Using RG393 Coax., Radio frequency assembly 7/16 DIN male to SC male cable using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to SC male cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and SC cable connection on the other. Our 7/16 DIN to SC cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to SC cable is a male to male coax assembly, PE37497, can also be known as a 7/16 DIN plug to SC plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to SC plug cable assembly PE37497 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to SC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37497 can also be used in the other direction and will be SC male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to SC cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to SC male cable using RG393 coax.

PE3C3749-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Push-on SMP female right angle to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our low loss right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C3749-200CM can also be known as a low loss right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3749-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax.

1 : $92.99
25 : $88.34
50 : $83.69
100 : $79.97

PE3C6337-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 48 inches. Outdoor Rated 4.3-10 Female to N Male Right Angle Low PIM Cable 48 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to N male right angle low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to N male right angle low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and right angle TC-SPO250-NM-RA-LP type N cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to right angle TC-SPO250-NM-RA-LP N type cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP type N cable is a female to male coax assembly, PE3C6337-48, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to right angle TC-SPO250-NM-RA-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPO250-NM-RA-LP type N plug cable assembly PE3C6337-48 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to right angle TC-SPO250-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPO250-NM-RA-LP N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6337-48 can also be used in the other direction and will be right angle TC-SPO250-NM-RA-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPO250-NM-RA-LP type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to N male right angle low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts.

1 : $131.99
25 : $125.39
50 : $118.79
100 : $113.51

PE3W03740/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Female to N Female Bulkhead Cable Using LMR-240 Coax with HeatShrink. PE3W03740/HS is a SMA female to N female bulkhead cable using LMR-240 coax. This Pasternack SMA female to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03740/HS SMA female to N female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W23748

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable Using RG316 Coax. PE3W23748 is a BMA plug bulkhead to TNC male cable using RG316 coax. This Pasternack BMA plug bulkhead to TNC male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm TNC for connector 2. Our plug BMA bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23748 BMA plug bulkhead to TNC male cable assembly is constructed with RG316 coax.

PE3W13741LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Female Bulkhead Cable Using LMR-100 Coax, LF Solder. PE3W13741LF is a Mini UHF male to N female bulkhead cable using LMR-100A coax. This Pasternack Mini UHF male to N female bulkhead cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13741LF Mini UHF male to N female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20374LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using 141 Coax, LF Solder. PE3W20374LF is a N male to N male cable using 141LL SR coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20374LF N male to N male cable assembly is constructed with 141LL SR coax.

TE Connectivity

353745-7

TE Connectivity

SQUIB AIRBAG/HSG-LID Number of Positions: 2 Primary Product Color: Yellow Protection & Strain Relief Accessory Type: Cover - Cable Exit Primary Product Material: PBT Strain Relief: Without Automotive Connector Cap & Cover | 2 Yellow Cover - Cable Exit PBT | Part Number: 353745-7 | Internal Number: 353745-7 | Alias Number: 0-0353745-7 | TE Connectivity
RoHS : Compliant

20,000 : $0.1
10,000 : $0.12
5,000 : $0.16
2,000 : $0.21
1,000 : $0.32
100 : $0.38

15,429

1-1337481-0

TE Connectivity

SMB R/A PCB Skt 50Ohm Gold Plt RF Interface: SMB RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .187 in RF Connector Mated Outer Diameter (Approximate): 4.75 mm Impedance: 50 Ω SMB Jack .187" 4.75 mm | Coax Connector | Part Number: 1-1337481-0 | Internal Number: 1-1337481-0 | TE Connectivity
RoHS : Compliant

100 : $4.59
50 : $4.82
10 : $5.41
1 : $5.85

3,735

2213748-1

TE Connectivity

COVER,LIGHT CONTROLLER,76MM DIA,MEDIUM Lighting Product Type: Cover Primary Product Color: Gray Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Not Vented Sleeve Compatible Cover Gray 76 mm 3" | Photo Control Cover | Part Number: 2213748-1 | Internal Number: 2213748-1 | TE Connectivity
RoHS : Compliant

50 : $6.76
25 : $7.16
10 : $7.56
1 : $7.95

3,004

2374902-1

TE Connectivity

GEMnet HDR, ASSY, 2P, 90deg,COD A Connector System: Wire-to-Board Sealable: No Shielded: Yes PCB Mount Orientation: Right Angle Number of Positions: 2 Wire-to-Board Right Angle | Data Connectivity Header | Part Number: 2374902-1 | Internal Number: 2374902-1 | TE Connectivity
RoHS : Compliant

2,500 : $2.47
1,000 : $3.09
500 : $3.71
250 : $4.7
100 : $6.19
50 : $7.42

2,196

2374901-2

TE Connectivity

GEMnet HDR, ASSY, 1P, 90deg,COD B Connector System: Wire-to-Board Sealable: No Shielded: No PCB Mount Orientation: Horizontal Number of Positions: 2 Wire-to-Board Horizontal | Data Connectivity Header | Part Number: 2374901-2 | Internal Number: 2374901-2 | TE Connectivity
RoHS : Compliant

10,000 : $2.19
5,000 : $2.73
2,500 : $3.64
1,000 : $4.86
500 : $7.29
100 : $8.74

2,155

2-1586037-4

TE Connectivity

24P VERT HDR VAL-U-LOK V2 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 24 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 24 | PCB Header & Receptacle | Part Number: 2-1586037-4 | Internal Number: 2-1586037-4 | TE Connectivity
RoHS : Compliant

1,000 : $1.1
100 : $1.48
10 : $1.83
1 : $2.31

1,232

3-747579-2

TE Connectivity

SHLDNG FERRULE, PLTD, BULK PKG Strain Relief Accessory Type: Shielding Ferrule Primary Product Material: Steel Compatible With Connector Shell Size: 1 3 Shielded: Yes Packaging Method: Bag Shielding Ferrule Steel 1 | Connector Strain Relief | Part Number: 3-747579-2 | Internal Number: 3-747579-2 | Alias Number: E98969-000 | TE Connectivity
RoHS : Compliant

1,000 : $0.33
500 : $0.34
100 : $0.35
50 : $0.37
25 : $0.42
10 : $0.45
1 : $0.53

1,180

280374-2

TE Connectivity

10P AMPMODU II SHRD HDR, ST, 0.38AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280374-2 | Internal Number: 280374-2 | TE Connectivity
RoHS : Compliant

1,000 : $2.86
500 : $2.94
250 : $3.03
100 : $3.12
50 : $3.2
25 : $3.29
10 : $3.38
1 : $3.46

995

1-1337446-0

TE Connectivity

BNC Pnl Skt 50Ohm Silver Pltd RF Interface: BNC RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .572 in RF Connector Mated Outer Diameter (Approximate): 14.53 mm Impedance: 75 Ω 50 Ω BNC Jack .572" 14.53 mm | Coax Connector | Part Number: 1-1337446-0 | Internal Number: 1-1337446-0 | TE Connectivity
RoHS : Compliant

1,000 : $4.83
500 : $4.96
250 : $5.12
100 : $5.29
50 : $5.44
1 : $5.97

922

5747837-4

TE Connectivity

15 MSFL RCPT RA 590 (IN,FM,BL) Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5747837-4 | Internal Number: 5747837-4 | 2 | TE Connectivity
RoHS : Compliant

1,000 : $5.54
500 : $5.69
250 : $5.87
100 : $6.07
50 : $6.24
1 : $6.85

859

RP73PF2A374KBTDF

TE Connectivity

RP 2A 0.25W 374K 0.1% 25PPM 1K RL Resistance Value: 374K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 374K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A374KBTDF | Internal Number: 4-2176094-8 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

346

1-282837-4

TE Connectivity

TERMI-BLOK MNT 14P Number of Positions: 14 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 14 Header Wire-to-Board .2" | Part Number: 1-282837-4 | Internal Number: 1-282837-4 | .2" | TE Connectivity
RoHS : Compliant

2,500 : $5.67
1,000 : $5.82
500 : $5.98
250 : $6.13
100 : $6.28
50 : $6.44
25 : $6.59
10 : $6.74
1 : $6.9

327

206037-4

TE Connectivity

CPC PLUG ASSEMBLY SZ 17-16 Number of Positions: 16 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 16 Housing 600 VDC Wire-to-Wire | Part Number: 206037-4 | Internal Number: 206037-4 | TE Connectivity
RoHS : Compliant

250 : $24.55
100 : $25.54
50 : $26.52
25 : $27.5
10 : $28.48
1 : $29.47

156

1-1003744-0-M

TE Connectivity

DT2-028K W/TH LEADS/RIVET Piezo Film Sensor Type: Element Sensor Options: Leads Strips Element Leads | Piezo Film Sensors With Lead | Part Number: 1-1003744-0-M | Internal Number: 11029805-00 | TE Connectivity
RoHS : Compliant

1 : $15.21

108

2374901-1

TE Connectivity

GEMnet HDR, ASSY, 1P, 90deg,COD A Connector System: Wire-to-Board Sealable: No Shielded: No PCB Mount Orientation: Horizontal Number of Positions: 2 Wire-to-Board Horizontal | Data Connectivity Header | Part Number: 2374901-1 | Internal Number: 2374901-1 | TE Connectivity
RoHS : Compliant

10,000 : $1.55
5,000 : $1.94
2,500 : $2.58
1,000 : $3.44
500 : $5.16
100 : $6.19