| Motore di ricerca datesheet componenti elettronici |
|
52W... Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Master Electronics | LENS-HL852-WC | LEDtronics Inc | Lens Cap - RFI/EMI Shielded - WaterClear RoHS : Compliant |
| 174 | |
| 3252W-1-502LF | Bourns Inc | Res Cermet Trimmer 5K Ohm 10% 0.75W(3/4W) 25(Elec)Turn 2.03mm (12.7 X 5.59 X 13.59mm) Pin Thru-Hole Tube RoHS : Compliant |
| 24 | ||
| M1252-WH005 | Alpha Wire | White - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
| LW7L-M1C52W | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| PS-125-2-WT-2 | Brady Worldwide Inc | PermaSleeve® Wire Marking Sleeves RoHS : Compliant |
| 0 | ||
| PS-375-2-WT-S | Brady Worldwide Inc | Permasleeve Wire Marking Sleeves 0.375 In (9.53 Mm) Diameter |Brady PS-375-2-WT-S RoHS : Compliant |
| 0 | ||
7101J52W3BE22![]() | C&K Switches | Rocker Switch - SP On-None-On - 0.4VA@20V - Black Concave w/Frame - Snap-in - Illuminated - Wire Wrap - Epoxy Seal RoHS : Compliant |
| 0 | ||
7101J52WQE22![]() | C&K Switches | Rocker Switch - SP On-None-On - 5A@120VAC/2A@250VAC - Black Concave w/Frame - Snap-in - Illuminated - Wire Wrap - Epoxy Seal RoHS : Compliant |
| 0 | ||
| 121143-0352-W | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 24-9 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 3252W-1-254 | Bourns Inc | Res Cermet Trimmer 250K Ohm 10% 0.75W(3/4W) 25(Elec)Turn 2.03mm (12.7 X 5.59 X 13.59mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | ||
| 3352W-1-200LF | Bourns Inc | Res Cermet Trimmer 20 Ohm 20% 0.5W(1/2W) 1(Elec)/1(Mech)Turn (8.89 X 5.33 X 9.53mm) Pin Thru-Hole Bag RoHS : Compliant |
| 0 | ||
| 3PS-125-2-WT-2 | Brady Worldwide Inc | Brady PermaSleeve Wire Marking Sleeves RoHS : Compliant |
| 0 | ||
| 3PS-375-2-WT-S | Brady Worldwide Inc | 2 x 21/32 Wire Marker Wire Sleeve Write On Legend White 3PS-375-2-WT-S RoHS : Compliant |
| 0 | ||
| 121567-0452-W | ITT Interconnect Solutions | 121567-0452 W RoHS : Compliant |
| 0 | ||
| LS1511-52-WH-BL-125 | Carling Technologies | Switch Rocker ON None OFF SPST Quick Connect Curved Rocker 15A 250VAC 28VDC 559.27VA 100000Cycles Bulk RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | MIC37152WR | Microchip Technology Inc | - Rail/Tube (Alt: MIC37152WR) RoHS : Compliant |
| 4,032 | |
| NPI52W101MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W101MTRF) RoHS : Compliant |
| 2,000 | ||
| MIC29152WU | Microchip Technology Inc | - Rail/Tube (Alt: MIC29152WU) RoHS : Compliant |
| 393 | ||
| MS3452W20-33S | Conesys | - Bulk (Alt: MS3452W20-33S) RoHS : Not Compliant | 14 | |||
| 3352W-1-103LF | Bourns Inc | - Bulk (Alt: 3352W-1-103LF) RoHS : Compliant |
| 11 | ||
| MS3452W20-14P | Conesys | - Bulk (Alt: MS3452W20-14P) RoHS : Not Compliant | 4 | |||
| MS3452W22-2P | Amphenol Corporation | - Bulk (Alt: MS3452W22-2P) RoHS : Not Compliant | 4 | |||
| MS3452W18-10S | Conesys | - Bulk (Alt: MS3452W18-10S) RoHS : Not Compliant | 3 | |||
| MS3452W32-1SW | Amphenol Corporation | - Bulk (Alt: MS3452W32-1SW) RoHS : Not Compliant | 2 | |||
| MS3452W16S-1SZ | Conesys | - Bulk (Alt: MS3452W16S-1SZ) RoHS : Not Compliant | 2 | |||
| MS3452W22-23SY | Conesys | - Bulk (Alt: MS3452W22-23SY) RoHS : Not Compliant | 1 | |||
| MS3452W10SL-3P | Amphenol Corporation | - Bulk (Alt: MS3452W10SL-3P) RoHS : Not Compliant | 1 | |||
| MS3452W20-33S | Amphenol Corporation | - Bulk (Alt: MS3452W20-33S) RoHS : Not Compliant | 1 | |||
| MS3452W24-10P | Amphenol Corporation | - Bulk (Alt: MS3452W24-10P) RoHS : Not Compliant | 1 | |||
| MS3452W22-22SX | Amphenol Corporation | - Bulk (Alt: MS3452W22-22SX) RoHS : Not Compliant | 1 | |||
![]() Newark | M1MA152WAT1G![]() | onsemi | Miscellaneous Mosfets; |Onsemi M1MA152WAT1G RoHS : Compliant |
| 16,034 | |
M1MA152WAT1G![]() | onsemi | Miscellaneous Mosfets; |Onsemi M1MA152WAT1G RoHS : Compliant |
| 16,034 | ||
MIC29152WD-TR![]() | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 1.5A, To-252-5; |Microchip Technology MIC29152WD-TR RoHS : Compliant |
| 2,526 | ||
| MIC29152WU-TR | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 1.5A, To-247-5; |Microchip Technology MIC29152WU-TR RoHS : Compliant |
| 1,332 | ||
| MIC29152WU-TR | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 1.5A, To-247-5; |Microchip Technology MIC29152WU-TR RoHS : Compliant |
| 1,332 | ||
| BD52W01G-CTR | ROHM Semiconductor | Voltage Detector, -40 To 125Deg C; |Rohm BD52W01G-CTR RoHS : Compliant |
| 500 | ||
| BD52W01G-CTR | ROHM Semiconductor | Voltage Detector, -40 To 125Deg C; |Rohm BD52W01G-CTR RoHS : Compliant |
| 500 | ||
| 3352W-1-103LF | Bourns Inc | Trimmer Single Turn Cermet Side Adjust; |Bourns, Inc. 3352W-1-103LF RoHS : Compliant |
| 500 | ||
| 3252W-1-103LF | Bourns Inc | Trimmer, Multi Turn, Cermet, Top Adjust; |Bourns, Inc. 3252W-1-103LF RoHS : Compliant |
| 300 | ||
| ADAU1452WBCPZ | Analog Devices Inc | Audio Processor, 16 Channel, Lfcsp-Ep; |Analog Devices, Inc. ADAU1452WBCPZ RoHS : Compliant |
| 126 | ||
| V680-HS52-W 2M | OMRON Industrial Automation | Ip67 Hf M22 Dia. Antenna; |Omron Industrial Automation V680-HS52-W 2M RoHS : Not Compliant |
| 45 | ||
| AS04004PO-2-LW152-WR-R | PUI Audio | Speaker, 82Dba, 420Hz, 4R, 200Hz-20Khz; |Pui Audio AS04004PO-2-LW152-WR-R RoHS : Compliant |
| 31 | ||
| MIC37252WR | Microchip Technology Inc | Ldo, Reg, 6Vin, 2.5A, Adj, 5Spak; |Microchip Technology MIC37252WR RoHS : Compliant |
| 19 | ||
| 5852 WH001 | Alpha Wire | Hook-Up Wire; |Alpha Wire 5852 WH001 RoHS : Compliant |
| 2 | ||
| MIC29752WWT | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 7.5A, To-247-5; |Microchip Technology MIC29752WWT RoHS : Compliant |
| 2 | ||
![]() Analog Devices Inc | ADAU1452WBCPZ | Analog Devices Inc | 300 MHz 32bit SigmaDSP Audio P RoHS : Compliant |
| 2,500 | |
| ADAU1452WBCPZ-RL | Analog Devices Inc | 300 MHz 32bit SigmaDSP Audio P RoHS : Compliant |
| 739 | ||
![]() RS | 4152 (WHC 500) | Heyco | NYLON WIRE HARNESS CLAMP, .5" BUNDLE DIA., #10SCREW, NATURAL |
| 3,440 | |
| 3240252 (WCC 14) | Phoenix Contact | CABLE CLAMP FOR DIN RAILS, GALVANIZED STEEL, FOR 14MM CBL DIA, WCC SERIES, WCC 14 |
| 314 | ||
| 16352-W | Leviton Manufacturing Co | HEAVY DUTY, SELF GROUNDING, 125 VAC, 20 A, 2 POLE, 3 WIRE, DECORA PLUS SERIES |
| 18 | ||
| 5352-W | Leviton Manufacturing Co | WH REC DUP TSLOT 2PO 3WI 20A125V |
| 10 | ||
| EE-SX952-W 1M (EESX952W1M) | OMRON Industrial Automation | PHOTO SENSOR, F-SHAPED, 6.5 MM SLOT, 2 NPN OUTPUTS, 1M CABLE, EE-SX95 SERIES |
| 9 | ||
| BCC052W (BCC M313-M413-3E-300-EX43T2-020) | Balluff Inc | BCC - CONNECTIVITY PRODUCTS, BCC M313-M413-3E-300-EX43T2-020 |
| 7 | ||
| 5252-W | Leviton Manufacturing Co | DUPLEX RECEPTACLE, OUTLET, SELF-GROUNDING, 2 POLE, HEAVY-DUTY, SMOOTH FACE |
| 6 | ||
| 3PS-125-2-WT-S | Brady Worldwide Inc | 3" CORE DOUBLE SIDED PERMASLEEVE POLYOLEFIN WIRE MARKING SLEEVES |
| 6 | ||
| 1212152 (WIREFOX 10/SB) | Phoenix Contact | REPLACEMENT CABLE STRIPPER BLADE FOR 10, 0.02-10 MM, 2 CONTACTS, WIREFOX SERIES |
| 5 | ||
| 5952WF | 3M | HEAVY DUTY MOUNTING TAPE, WHITE, 3/4 IN X 15 YD, 45.0 MIL |
| 2 | ||
| MS3452W22-22P | Amphenol Aerospace | CONNECTOR, CIRCULAR, 4P BOX MT PIN RECEPT SZ 22 MIL-DTL-5015 |
| 2 | ||
| MKTC52/WKT-26 | Schmersal | JOYSTICK 22 3MM MOUNTING HOLD KNURLED NUT UP TO 6MM FRONT PLATE THICKNESS |
| 1 | ||
| 3FR-125-2-WT-S-2 | Brady Worldwide Inc | FLUID RESISTANT POLYOLEFIN WIRE MARKING SLEEVES, .125"DIA X 1"W, WHITE |
| 1 | ||
| MS3452W10SL-4S(LC) (3452W10SL4SL) | Amphenol Aerospace | FEMALE 2 POSITION AL RECEPTACLE LESS CONTACTS |
| 0 | ||
| LS1511-52-WH-BL-125 (RLS-00102124|LS1511-52-WH-BL-125|LS151152WHBL125) | Carling Technologies | ROCKER SWITCH, SP, ILLUMINATED, LS-SERIES |
| 0 | ||
![]() Microchip Technology Inc | MIC37152WR-TR | Microchip Technology Inc | LV, 1.5A uCap LDO, SPAK, Projected EOL: 2035-11-29 RoHS : Compliant |
| 15,881 | |
| MIC37252WU | Microchip Technology Inc | LV, 2.5A uCap LDO, DDPAK, Projected EOL: 2036-01-27 RoHS : Compliant |
| 7,500 | ||
| MIC37152WR | Microchip Technology Inc | LV, 1.5A uCap LDO, SPAK, Projected EOL: 2036-07-06 RoHS : Compliant |
| 6,432 | ||
| MIC37252WR | Microchip Technology Inc | LV, 2.5A uCap LDO, SPAK, Projected EOL: 2036-04-05 RoHS : Compliant |
| 4,752 | ||
MIC37252WR-TR![]() | Microchip Technology Inc | LV, 2.5A uCap LDO, SPAK, Projected EOL: 2036-03-17 RoHS : Compliant |
| 4,244 | ||
MIC29152WD-TR![]() | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, TO-252, Projected EOL: 2036-06-15 RoHS : Compliant |
| 1,101 | ||
| MIC39152WU-TR | Microchip Technology Inc | 1.5A, Adjustable VOUTuCap LDO, DDPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 561 | ||
| MIC29152WU-TR | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, DDPAK, Projected EOL: 2036-01-28 RoHS : Compliant |
| 27 | ||
| MIC29752WWT | Microchip Technology Inc | 7.5A LDO Adj. + Shutdown, TO-247, Projected EOL: 2036-10-28 RoHS : Compliant |
| 24 | ||
| MIC29152WT | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, TO-220, Projected EOL: 2036-01-28 RoHS : Compliant |
| 15 | ||
| MIC39152WU | Microchip Technology Inc | 1.5A, Adjustable VOUTuCap LDO, DDPAK, Projected EOL: 2035-12-16 RoHS : Compliant |
| 3 | ||
| MIC29152WU | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, DDPAK, Projected EOL: 2036-02-11 RoHS : Compliant |
| 0 | ||
| MIC39152WD | Microchip Technology Inc | 1.5A Adjustable Wide VIN LDO, TO-252, Projected EOL: 2036-07-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC37252WU-TR | Microchip Technology Inc | LV, 2.5A F2432Cap LDO, DDPAK, Projected EOL: 2036-05-11 RoHS : Compliant |
| 0 | ||
MIC39152WD-TR![]() | Microchip Technology Inc | 1.5A Adjustable Wide VIN LDO, TO-252, Projected EOL: 2035-12-02 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | RMOTDA252WRZZ | MISCELLANEOUS | 100 | |||
| LENS-HL852-WC | LEDtronics Inc | 54 | ||||
| MS16995-2 W/KEL-F PELL-IT | 50 | |||||
| MS3452W32-1PW | MS Connectors | 8 | ||||
| MS3452W16-11S | MS Connectors | 3 | ||||
| MS3452W12S-3S | MS Connectors | 1 | ||||
| MS3452W10SL-4P | MS Connectors | 1 | ||||
| MS3452W14S-2S | MS Connectors | 1 | ||||
![]() Onlinecomponents.com | 304-52W | E-Z-Hook | RoHS : Compliant |
| 0 | |
| 210-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| AWP00-52W | Leviton Manufacturing Co | RENIIPLATE-5N2W-0FINWHT RoHS : Compliant |
| 0 | ||
| 212-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 213-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 730-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 703-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 230-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 211-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| AWP0F-52W | Leviton Manufacturing Co | RENIIPLATE-5N2W-FINSWHT RoHS : Compliant |
| 0 | ||
| 313-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 203-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 204-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| M85049/24-52W | Amphenol PCD | Backshell - Non Env-EMI/RFI - Cadmium RoHS : Compliant |
| 0 | ||
| M85049/25-52W | Amphenol PCD | Backshell - Non Env-EMI/RFI - Cadmium RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | M1MA152WAT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 80,449 | |
M1MA152WKT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 117,000 | ||
| NSVM1MA152WKT1G | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 91,604 | ||
| NSVM1MA152WAT1G | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 1,933 | ||
| LC75852W-E | onsemi | Display Drivers and Controller LCD 90 Segment Serial 64-QFP Tray RoHS : Compliant |
| 10,813 | ||
| ADBMS2952WCCSZ | Analog Devices Inc | Battery Pack Monitor RoHS : Compliant | 260 | |||
SNJ54H52W![]() | Texas Instruments | AND-OR Gate, TTL/H/L Series, 1-Func, 9-Input, TTL, CDFP14 RoHS : Not Compliant |
| 42 | ||
| SNJ54AS652W | Texas Instruments | Bus Transceiver 1 Element 8 Bits 5V 24-CFP RoHS : Not Compliant |
| 45 | ||
| SNJ54LS352W | Texas Instruments | Multiplexer, LS Series, 2-Func, 4 Line Input, 1 Line Output, Inverted Output, TTL, CDFP16 RoHS : Not Compliant |
| 228 | ||
DM74ALS652WMX![]() | Fairchild Semiconductor Corporation | 74ALS652 - Octal 3-STATE Bus Transceiver and Register RoHS : Not Compliant |
| 5,567 | ||
| FAN6752WMY | Fairchild Semiconductor Corporation | Highly Integrated Green-Mode PWM Controller RoHS : Compliant |
| 4,761 | ||
MM74HC4052WM![]() | Fairchild Semiconductor Corporation | IC SP4T 4:1 2 CRCT 35MHz 2V - 6V 16-SOIC Tube RoHS : Compliant |
| 1,025 | ||
![]() Sager | 5252W | Hubbell Incorporated | RCPT, DUP SB, HUBPRO, 15A 125V, SF, WH |
| 0 | |
| LW7L-M1C52W | IDEC Corporation | Pushbutton Switches 25mm sq Pushbutton Illuminated | 0 | |||
| LP3-31J252W | OTTO Engineering Inc | ILLUMINATED, SEALED, MOMENTARY ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| LP3-R3L352W-T1 | OTTO Engineering Inc | Pushbutton Switches | 0 | |||
| IG5352WTR | Hubbell Incorporated | COMM 20A SIDE & BACK WIRED IG TR WH |
| 0 | ||
| HA1L-M3C52-W | IDEC Corporation | Pushbutton Switches 16mm Pushbutton Illuminated | 0 | |||
| RR152WWNE | Carling Technologies | Rocker Switches |
| 0 | ||
| SNAP2152WLTR | Hubbell Incorporated | Hubbell | 0 | |||
7101J52W3BE22![]() | C&K Switches | Rocker Switches ON None ON SPDT 20VAC 20VDC 0.4W RoHS : Compliant | 0 | |||
7101J52WQE22![]() | C&K Switches | Rocker Switches Miniature Rocker & Lever Handle Switch RoHS : Compliant | 0 | |||
| FGG.2B.704.CLAD52W | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG MALE W. CABLE COLLET RoHS : Compliant |
| 0 | ||
| HA1F-2C52-W | IDEC Corporation | Industrial Panel Mount Indicators / Switch Indicators 16mm Selector Switch Lighted | 0 | |||
| XGA52W-88Z1 | Saia-Burgess | Basic / Snap Action Switches Miniature microswitch | 0 | |||
| SNAP2152WLTRA | Hubbell Incorporated | SNAPCONNECT DECO 15A/125V LED TR WH |
| 0 | ||
| LP3-F3G352W | OTTO Engineering Inc | ILLUMINATED, SEALED, MOMENTARY ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
![]() TME | 3352W-1-104 | Bourns Inc | Potentiometer: mounting; 100kΩ; single turn; 500mW; ±20%; linear RoHS : Not Compliant |
| 444 | |
| D38999/52W21N | TE Connectivity | Protection cover; straight RoHS : Not Compliant |
| 16 | ||
| 1852 WH005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 28AWG; PVC; white; 600V; 30.5m |
| 7 | ||
| 5852 WH001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 28AWG; PTFE; white; 600V; 305m |
| 5 | ||
| 3352W-1-104LF | Bourns Inc | Potentiometer: mounting; 100kΩ; single turn; vertical; 0.5W; ±20% RoHS : Compliant |
| 0 | ||
| 6652 WH002 | Alpha Wire | Wire; Alpha Essential C&C; 2x18AWG; unshielded; 300V; 152m; Cu |
| 0 | ||
| 3352W-1-501LF | Bourns Inc | Potentiometer: mounting; 500Ω; single turn; vertical; 0.5W; ±20% RoHS : Compliant |
| 0 | ||
| RCP052 WR06 | EQUIP-TEST | Test acces: test probe socket; Plating: gold-plated; AgNi |
| 0 | ||
| EE-SX952-W 1M | OMRON Corporation | Sensor: photoelectric; Range: 5mm; PNP; DARK-ON,LIGHT-ON; 1m |
| 0 | ||
| 3252W-1-501LF | Bourns Inc | Potentiometer: mounting; 500Ω; multiturn; vertical; 0.75W; ±10% RoHS : Compliant |
| 0 | ||
| 3252W-1-104LF | Bourns Inc | Potentiometer: mounting; 100kΩ; multiturn; vertical; 0.75W; ±10% RoHS : Compliant |
| 0 | ||
| ADAU1452WBCPZ-RL | Analog Devices Inc | IC: Digital Signal Processor; I2C,self-boot,SPI; 3.3VDC; LFCSP72 RoHS : Compliant |
| 0 | ||
| 3352W-1-502LF | Bourns Inc | Potentiometer: mounting; 5kΩ; single turn; vertical; 0.5W; ±20% RoHS : Compliant |
| 0 | ||
| 3352W-1-105LF | Bourns Inc | Potentiometer: mounting; 1MΩ; single turn; vertical; 0.5W; ±20% RoHS : Compliant |
| 0 | ||
| EE-SX952-W 3M | OMRON Corporation | Sensor: photoelectric; Range: 0÷5mm; NPN; Connection: cables; 3m |
| 0 | ||
![]() Ameya Holding Limited | AP2552W6-7 | Diodes Incorporated | AP2552 Series Adjustable Current Limit Single Channel Power Switch - SOT-26 RoHS : Compliant | 83,445 | ||
| BD52W01G-CTR | ROHM Semiconductor | Nano Energy™, 车载用,灵活设置延迟时间 Dual输出 窗口电压检测器(复位)IC RoHS : Compliant |
| 6,300 | ||
| BD52W05G-CTR | ROHM Semiconductor | Nano Energy™, 车载用,灵活设置延迟时间 Dual输出 窗口电压检测器(复位)IC RoHS : Compliant |
| 6,300 | ||
| LKMD1152W4R7MF | Ymin | 500 | ||||
| BD52W04G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD52W02G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD52W06G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 55 | ||
![]() ComSIT USA | MA152WATX | Panduit Corp | Rectifier Diode, 2 Element, 0.1A, Silicon RoHS : Not Compliant | 38,005 | ||
MIC29152WUTR![]() | Microchip Technology Inc | Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, PSSO5 RoHS : Compliant | 1,492 | |||
| SAA7152WP | Philips Semiconductors | Electronic Component RoHS : Not Compliant | 75 | |||
| MIC29152WT | Micrel Inc | HIGH-CURRENT LOW-DROPOUT REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, BIPolar RoHS : Compliant | 58 | |||
| MIC29152WU | Micrel Inc | HIGH-CURRENT LOW-DROPOUT REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, PSSO5 RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | MS3452W20-7PW | Conesys | Box Mt. Receptacle Cad Od Alum |
| 30 | |
| MS3452W16S-4PX | Conesys | Box Mt. Receptacle Cad Od Alum |
| 21 | ||
| MS3452W12S-4B | Amphenol Aerospace | RECEPT 3452W12S4B | 0 | |||
| MS3452W18-12B | Amphenol Aerospace | RECEPT 3452W1812B | 0 | |||
| MS3452W20-33P | Amphenol Aerospace | RECEPT 3452W2033P | 0 | |||
| MS3452W20-33P | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W20-3SX | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W22-22P | Conesys | Box Mt. Recept Cad Od Alum | 0 | |||
| MS3452W22-22P | Amphenol Aerospace |
| 0 | |||
| MS3452W22-22P | Amphenol Aerospace | 0 | ||||
| MS3452W24-10PW | Conesys | Box Mt. Recept Cad Od Alum |
| 0 | ||
| MS3452W24-10PW | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W24-11P | Amphenol Aerospace | RECEPT 3452W2411P | 0 | |||
| MS3452W24-11P | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W24-27S | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
![]() NexGen Digital | SAA7152WP | Philips E C G Inc | 106 | |||
![]() PEI Genesis | AE552W16-10S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | |
| MS3452W22-22P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3452W22-22P | Amphenol Aerospace |
| 0 | |||
| MS3452W24-10PW | Amphenol Aerospace |
| 0 | |||
| MS3452W24-10PW | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3452W28-21SX | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3452W28-21SX | Amphenol Aerospace |
| 0 | |||
| MS3452W32-63P-LC | Amphenol Aerospace |
| 0 | |||
| MS3452W32-8SZ | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3452W12S-3S-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS3452W18-9P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3452W20-15PZ | Amphenol Aerospace |
| 0 | |||
| MS3452W22-14S | Amphenol Aerospace |
| 0 | |||
| MS3452W22-14S-LC | Amphenol Aerospace |
| 0 | |||
| MS3452W32-8PW | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
![]() Powell Electronics | MS3452W18-1PZ | Conesys | BOX MT. REC. |
| 69 | |
| MS3452W20-24PX | Conesys | BOX MT. REC. |
| 69 | ||
| MS3452W22-22P | Conesys | BOX MT. REC. |
| 64 | ||
| MS3452W16S-4PX | Conesys | BOX MT. REC. |
| 53 | ||
| MS3452W16-11PW | Conesys | BOX MT. REC. |
| 48 | ||
| MS3452W20-29SZ | Conesys | BOX MT. REC. |
| 47 | ||
| 3452W226P | Amphenol Corporation | MIL- C 5015 RECEPT CONNECTOR |
| 19 | ||
| MS3452W18-13SX | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 13 | ||
| M28840/252WB | Glenair Inc | BACKSHELL |
| 11 | ||
| MS3452W20-15PZ | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 11 | ||
| MS3452W22-22SLC | Amphenol Corporation | CONNECTOR |
| 10 | ||
| MS3452W28-21SX | Amphenol Corporation | CONNECTOR |
| 6 | ||
| MS3452W20-18BW | Amphenol Corporation | CONNECTOR |
| 4 | ||
| MS3452W24-10PW | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 2 | ||
| MS3452W20-21SWLC | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() Richardson RFPD | APT-966K52W1CHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | ||
| APT-137K52W1CHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-776K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-147K52W1DHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| ADAU1452WBCPZ150 | Analog Devices Inc | DSP Fixed-Point 32bit 294.912MHz Automotive AEC-Q1 RoHS : Compliant |
| 0 | ||
| APT-486K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-147K52W1CHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-576K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| ADAU1452WBCPZ150RL | Analog Devices Inc | DSP Fixed-Point 32bit 294.912MHz Automotive AEC-Q1 RoHS : Compliant |
| 0 | ||
| APT-966K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 1.25V to 25V 1.5A 6-Pin(5+Tab) T RoHS : Compliant | 0 | |||
| APT-137K52W1DHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-117K52W1CHA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-536K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APT-386K52W86HA | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | MSD20068K-5%-2W | INSTOCK | 11,000 | |||
| WAO2-22R-5%-2W | INSTOCK | 10,993 | ||||
| ADAU1452WBCPZ-RL | Analog Devices Inc | INSTOCK RoHS : Compliant | 10,000 | |||
| MSD20022K-5%-2W | INSTOCK | 7,995 | ||||
| RLF2SJ-0.10R5%2.W | INSTOCK | 2,000 | ||||
| 10R 5% 2W | INSTOCK | 1,845 | ||||
| MIC29152WT | INSTOCK | 207 | ||||
| MS3452W20-14PW | Amphenol Corporation | INSTOCK RoHS : Not Compliant | 1 | |||
![]() Avnet Abacus | LNJ352W83RA | Panasonic Electronic Components | LED Yellow Green SMD 04mm x 13mm 5 mA 195 V 572 nm (Alt: LNJ352W83RA) RoHS : Compliant | 0 | ||
| 3252W-1-502LF | Bourns Inc | (Alt: 3252W-1-502LF) RoHS : Compliant | 0 | |||
| NPI52W151MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W151MTRF) RoHS : Compliant | 0 | |||
| 3252W-1-203LF | Bourns Inc | (Alt: 3252W-1-203LF) RoHS : Compliant | 0 | |||
| 3352W-1-101LF | Bourns Inc | (Alt: 3352W-1-101LF) RoHS : Not Compliant | 0 | |||
| 3252W-1-103LF | Bourns Inc | (Alt: 3252W-1-103LF) RoHS : Not Compliant | 0 | |||
| NPI52W3R3MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W3R3MTRF) RoHS : Compliant | 0 | |||
| 3252W-1-104LF | Bourns Inc | (Alt: 3252W-1-104LF) RoHS : Not Compliant | 0 | |||
| 3352W-1-201LF | Bourns Inc | (Alt: 3352W-1-201LF) RoHS : Not Compliant | 0 | |||
| 3352W-1-102LF | Bourns Inc | (Alt: 3352W-1-102LF) RoHS : Not Compliant | 0 | |||
| 3252W-1-100LF | Bourns Inc | (Alt: 3252W-1-100LF) RoHS : Compliant | 0 | |||
| R752W42205000K | KEMET Corporation | Power Film Capacitor 22 uF 230 V 400 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R752W42205000K) RoHS : Compliant | 0 | |||
| R752W4220AA00K | KEMET Corporation | Power Film Capacitor 22 uF 230 V 400 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R752W4220AA00K) RoHS : Compliant | 0 | |||
| 3252W-1-103MLF | Bourns Inc | Res Cermet Trimmer 10K Ohm 10 34W 25ElecTurn 203mm 2032 X 762 X 1499mm Pin Panel MountTh (Alt: 3252W-1-103MLF) RoHS : Compliant | 0 | |||
| MS3452W-14S SHELL | ITT Interconnect Solutions | Circular Connector MILDTL5015 Series Box Mount Receptacle Crimp Socket Threaded Aluminum Body (Alt: 248-2632-000) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | AP22652W6-7 | Diodes Incorporated | Power Load Distribution Switch, High Side, Active Low, 1 Output, 2.665 A, 0.065 ohm, SOT-26-6 (Alt: AP22652W6-7) RoHS : Compliant |
| 0 | |
| AP2552W6-7 | Diodes Incorporated | (Alt: AP2552W6-7) RoHS : Compliant | 0 | |||
| 568PD1-003H31152-W | Shenzhen Derun Electronics Co Ltd | (Alt: 568PD1-003H31152-W) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NSVM1MA152WKT1G | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: NSVM1MA152WKT1G) RoHS : Compliant | 24,000 | ||
| MIC29152WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO220 (Alt: MIC29152WT) RoHS : Compliant | 50 | |||
| AP2552W6-7 | Diodes Incorporated | USB Power SW High Side Single 55V 1251A 6Pin SOT26 TR (Alt: AP2552W6-7) RoHS : Compliant | 0 | |||
| AP22652W6-7 | Diodes Incorporated | Power Load Distribution Switch High Side Active Low 1 Output 2665 A 0065 ohm SOT266 (Alt: AP22652W6-7) RoHS : Compliant | 0 | |||
M1MA152WAT1G![]() | onsemi | 80 V Dual Common Anode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WAT1G) RoHS : Compliant | 0 | |||
| MIC37252WR | Microchip Technology Inc | LDO Regulator Pos 124 to 55V 25A 5Pin SPAK Tube (Alt: MIC37252WR) RoHS : Compliant | 0 | |||
| MIC29752WWT | Microchip Technology Inc | LDO Regulator Pos 125V to 26V 75A 5Pin TO247 Tube (Alt: MIC29752WWT) RoHS : Compliant | 0 | |||
M1MA152WKT1G![]() | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WKT1G) RoHS : Compliant | 0 | |||
| MIC37152WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK Tube (Alt: MIC37152WR) RoHS : Compliant | 0 | |||
| MIC29152WU-TR | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 TR (Alt: MIC29152WU-TR) RoHS : Compliant | 0 | |||
| MIC37152WR-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK TR (Alt: MIC37152WR-TR) RoHS : Compliant | 0 | |||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO252 TR (Alt: MIC29152WD-TR) RoHS : Compliant | 0 | |||
MIC39152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124 to 155V 15A 5Pin TO252 TR (Alt: MIC39152WD-TR) RoHS : Compliant | 0 | |||
| X9252WV24IZ-2.7 | Renesas Electronics Corporation | (Alt: X9252WV24IZ-2.7) RoHS : Compliant | 0 | |||
| NSVMMBD352WT1G | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: NSVMMBD352WT1G) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MIC29152WU-TR | Micrel Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 217 | |
| CRCP6252WX | RCA | IN STOCK SHIP TODAY |
| 39 | ||
| CTP252WH | General Electric Company | IN STOCK SHIP TODAY |
| 27 | ||
| AM1S-B2AAA02JDA52W-15 | Eaton Electrical | IN STOCK SHIP TODAY |
| 20 | ||
X9252WV24I-2.7![]() | Intersil Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| MS3452W36-10PW | Matrix Connector | IN STOCK SHIP TODAY |
| 10 | ||
| AM1S-B9AAA02JDA52W-65 | Eaton Electrical | IN STOCK SHIP TODAY | 10 | |||
| AM1S-A9AAA02JDA52W-50 | Eaton Electrical | IN STOCK SHIP TODAY | 9 | |||
| AM1S-B2AAA02KDA52W-80 | Eaton Electrical | IN STOCK SHIP TODAY |
| 7 | ||
| AM1S-B9AAA02JDA52W-20 | Eaton Electrical | IN STOCK SHIP TODAY |
| 4 | ||
| AM1S-B2AAA02JDA52W-20 | Eaton Electrical | IN STOCK SHIP TODAY |
| 4 | ||
| 3PS-375-2-WT | Brady Worldwide Inc | IN STOCK SHIP TODAY |
| 3 | ||
| AM1S-B2-AAA02JD-DU-52W-15 | Eaton Electrical | IN STOCK SHIP TODAY | 2 | |||
| AM1S-B2AAA02J0A52W-25 | Eaton Electrical | IN STOCK SHIP TODAY | 2 | |||
| AM1S-B2AAA02JDA52W-10 | Eaton Electrical | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | CIT-250-15-2W | Essentra Components | 0 | |||
![]() EBV Elektronik | MIC37152WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK Tube (Alt: MIC37152WR) RoHS : Compliant | 48 | ||
MMBD352WT1G![]() | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: MMBD352WT1G) RoHS : Compliant | 0 | |||
M1MA152WAT1G![]() | onsemi | 80 V Dual Common Anode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WAT1G) RoHS : Compliant | 0 | |||
| MIC29752WWT | Microchip Technology Inc | LDO Regulator Pos 125V to 26V 75A 5Pin TO247 Tube (Alt: MIC29752WWT) RoHS : Compliant | 0 | |||
M1MA152WKT1G![]() | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WKT1G) RoHS : Compliant | 0 | |||
| MIC29152WU | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 Tube (Alt: MIC29152WU) RoHS : Compliant | 0 | |||
| MIC29152WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO220 (Alt: MIC29152WT) RoHS : Compliant | 0 | |||
| MIC29152WU-TR | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 TR (Alt: MIC29152WU-TR) RoHS : Compliant | 0 | |||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO252 TR (Alt: MIC29152WD-TR) RoHS : Compliant | 0 | |||
MIC39152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124 to 155V 15A 5Pin TO252 TR (Alt: MIC39152WD-TR) RoHS : Compliant | 0 | |||
MIC37252WR-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 25A 5Pin SPAK TR (Alt: MIC37252WR-TR) RoHS : Compliant | 0 | |||
| NSVMMBD352WT1G | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: NSVMMBD352WT1G) RoHS : Compliant | 0 | |||
![]() ECCO | MS3452W16-10P-LC | Aero-Electric Connector Inc | 228 | |||
| MS3452W16-10S-LC | Aero-Electric Connector Inc | 104 | ||||
| MS3452W16-10SW-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10S-01 | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10SX-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10BY | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10SX-01 | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10B | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10SY-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10BX | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10SW-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10BW | Aero-Electric Connector Inc | 79 | ||||
| MS3452W16-10B | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10S-LC | Aero-Electric Connector Inc | 79 | ||||
| AE552W16-10SY-01 | Aero-Electric Connector Inc | 79 | ||||
![]() FDH Electronics | MS3452W36-9B | Corsair Electrical Connectors Inc | Connector |
| 78 | |
| MS3452W36-9SZ-LC | Corsair Electrical Connectors Inc | Connector |
| 78 | ||
| MS3452W16-10SW-LC | Aero-Electric Connector Inc | Connector |
| 58 | ||
| MS3452W40-56SY | Corsair Electrical Connectors Inc | Connector |
| 31 | ||
| MS3452W40-56SW | Corsair Electrical Connectors Inc | Connector |
| 30 | ||
| MS3452W40-10PX-LC | Corsair Electrical Connectors Inc | Connector |
| 28 | ||
| MS3452W36-8SX-LC | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3452W36-8BW | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3452W36-8SZ-LC | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3452W36-10PX-LC | Corsair Electrical Connectors Inc | Connector |
| 8 | ||
| MS3452W36-10PZ-LC | Corsair Electrical Connectors Inc | Connector |
| 8 | ||
| MS3452W18-4PX | Corsair Electrical Connectors Inc | Connector | 8 | |||
| MS3452W20-24S-LC | Amphenol Aerospace | Circular Conn |
| 6 | ||
| MS3452W32-3B | Corsair Electrical Connectors Inc | Connector |
| 2 | ||
| D38999/52W11R | Glenair Inc | Connector |
| 0 | ||
![]() Flip Electronics | M1MA152WAT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 153,000 | |
M1MA152WKT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 143,550 | ||
| NSVM1MA152WAT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 129,000 | ||
| NSVM1MA152WKT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 126,000 | ||
![]() Maritex | HL-AF-5060H252W-3-S1-T1-HR3 4000K 3-STEP | Hongli Zhihui Group Co LTD | LED mid-power; SMD; PLCC6; neutral white; 4000K; 24-26lm/20mA; 2.6-3.2V; diffused; 120 degrees; 5.4x5.0x1.6mm |
| 3,079 | |
| ADAU1452WBCPZ | Analog Devices Inc | Digital Signal Processors (DSP); ADAU1452WBCPZ; ANALOG DEVICES; I2C, SPI; 72; 2.97 V; 3.63 V RoHS : Compliant |
| 2 | ||
![]() Neutron USA | 3252W-1-502LF | Bourns Inc | Trimmer Resistors - Through Hole 5Kohms 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 50 | |
| 3252W-1-504 | Bourns Inc | Trimmer Resistors - Through Hole 500Kohms 1/2" Square Sealed Wire Leads RoHS : Not Compliant |
| 50 | ||
| 3252W-1-103LF | Bourns Inc | Trimmer Resistors - Through Hole 10K 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 50 | ||
| 3252W-1-104LF | Bourns Inc | Trimmer Resistors - Through Hole 100K 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 50 | ||
| 3252W-1-203LF | Bourns Inc | Trimmer Resistors - Through Hole 20Kohms 1/2" Sq Sealed Wire Leads RoHS : Compliant |
| 36 | ||
| 3252W-1-501 | Bourns Inc | Trimmer Resistors - Through Hole 500 OHMS 1/2IN Sq Sealed RoHS : Not Compliant |
| 32 | ||
| 3252W-1-502 | Bourns Inc | Trimmer Resistors - Through Hole 5Kohms 1/2" Square Sealed Wire Leads RoHS : Not Compliant |
| 22 | ||
| LP3-31J252W | OTTO Engineering Inc | Pushbutton Switches Illuminated & Sealed Pushbutton Switch RoHS : Compliant |
| 10 | ||
| LP3-F3G352W | OTTO Engineering Inc | Pushbutton Switches Flush Dome SPDT 12V Red LED RoHS : Compliant |
| 10 | ||
| LP3-F3L352W | OTTO Engineering Inc | Pushbutton Switches Flush Dome SPDT 24V Green LED RoHS : Compliant |
| 10 | ||
| LP3-R2L352W | OTTO Engineering Inc | Pushbutton Switches Raised Dome SPST 24V Green LED RoHS : Compliant |
| 10 | ||
| K75352WW | Kensington Computer Products Group | RED SURETRACK WRLS MOUSE DUAL WRLS BLUETOOTH USB |
| 0 | ||
| K83452WW | Kensington Computer Products Group | KENSINGTONS H3000 BLUETOOTH HEADSET DELIVERS COOLING-GEL INFUSED MEMORY FOAM EA |
| 0 | ||
| EE-SX952-W 1M | OMRON Corporation | Pre-Wired Photomicrosensor, F-shp Transm, Photo IC L/D ON NPN Collector Control Output 24V 50mA, Resp f: 3 kHz, Land D 2 outputs, LED 940nm, Apt 0.8mm, d 5mm |
| 0 | ||
| K87652WW | Kensington Computer Products Group | A1020 BOOM ARM |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0052/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 680 | ||
| PE3C0052/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 36 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 36 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-36 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-36 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C3952/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-48 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-48 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | CR1225-2W-2000FT | VENKEL LTD | Chip Resistor;1225;2W;200R;�1% RoHS : Compliant | 12,000 | ||
![]() Vyrian | SN54LS352W-10 | Texas Instruments | Multiplexer, LS Series, 2-Func, 4 Line Input, 1 Line Output, Inverted Output, TTL, CDFP16 | 8,141 | ||
| SN54H52W | Texas Instruments | AND-OR Gate, TTL/H/L Series, 1-Func, 9-Input, TTL, CDFP14 RoHS : Not Compliant | 7,707 | |||
| TP3052WM | Texas Instruments | Codec RoHS : Not Compliant | 7,607 | |||
| SNJ54LS152W-10 | Texas Instruments | Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Inverted Output, TTL, CDFP14 | 6,389 | |||
| SN54LVTH16952WDR | Texas Instruments | Registered Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 | 6,233 | |||
| SNJ54ALVTH16652WD | Texas Instruments | Registered Bus Transceiver, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 RoHS : Not Compliant | 4,003 | |||
SNJ54ABT16652WD![]() | Texas Instruments | Registered Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 RoHS : Not Compliant | 3,069 | |||
| SN54LVT16952WD | Texas Instruments | Registered Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 | 3,007 | |||
| MS3452W22-18SX | Defense Logistics Agency | MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 857 | |||
| MS3452W22-2SW | Defense Logistics Agency | 3 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 762 | |||
| MS3452W32-22S | Defense Logistics Agency | MIL Series Connector, 54 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 734 | |||
| MS3452W22-18SW | Defense Logistics Agency | MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 599 | |||
| MS3452W22-18SZ | Defense Logistics Agency | MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 551 | |||
| MS3452W22-22P | Defense Logistics Agency | 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 312 | |||
| MS3452W22-2SY | Defense Logistics Agency | 3 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 200 | |||
![]() Win Source Electronics | MIC29152WU-TR | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO263-5 / LDO Regulator Pos 1.25V to 25V 1.5A Automotive 6-Pin(5+Tab) TO-263 T/R RoHS : Compliant |
| 102,730 | |
| AP22652W6-7 | Diodes Incorporated | LOAD SWITCH,SOT26,T&R,3K RoHS : Compliant |
| 96,000 | ||
| MIC29152WU | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO263-5 RoHS : Compliant |
| 13,152 | ||
| MIC29152WD | Micrel Inc | High-Current Low-Dropout Regulators RoHS : Compliant |
| 11,259 | ||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 1.27V to 25V 1.5A Automotive 6-Pin(5+Tab) TO-252 T/R / IC REG LDO ADJ 1.5A TO252-5 RoHS : Compliant |
| 10,480 | ||
| ADAU1452WBCPZ | Analog Devices Inc | DSP Fixed-Point 32bit 294.912MHz Automotive 72-Pin LFCSP EP Tray / IC AUDIO PROCESSOR 72LFCSP RoHS : Compliant |
| 10,000 | ||
| ADAU1452WBCPZ-RL | Analog Devices Inc | IC AUDIO PROCESSOR 72LFCSP RoHS : Compliant |
| 9,400 | ||
| MIC29152WT | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO220-5 RoHS : Compliant |
| 6,300 | ||
| MIC29752WWT | Microchip Technology Inc | IC REG LDO ADJ 7.5A TO247-5 RoHS : Compliant |
| 2,381 | ||
| BCM88752WB0KFSBG | Broadcom Limited |
| 700 | |||
| ADAU1452WBCPZ150 | Analog Devices Inc | 150 MHZ 32BIT SIGMADSP AUDIO PRO / RoHS : Compliant |
| 10 | ||
| ADAU1452WBCPZ150RL | Analog Devices Inc | 150 MHZ 32BIT SIGMADSP AUDIO PRO RoHS : Compliant |
| 9 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |