| Motore di ricerca datesheet componenti elettronici |
|
603HPF-R18 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Master Electronics | FW-06-03-H-D-185-110-P-FR | Samtec Inc | FLEXIBLE MICRO BOARD STAC RoHS : Compliant |
| 0 | |
| MW-16-03-H-D-130-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-06-03-H-D-180-130 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| MW-06-03-H-D-225-075 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-16-03-H-D-157-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTMH-106-03-H-DV-A-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTMH-106-03-H-DV-ES | Samtec Inc | Headers & Wire Housings 1.00 mm Surface Mount Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| ESQT-136-03-H-S-408 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-16-03-H-D-120-190 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-36-03-H-D-231-065 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| ESQT-106-03-H-Q-408 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQT-136-03-H-D-358 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTM-116-03-H-DV-S-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTSH-116-03-H-D-ES | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-16-03-H-D-130-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | PTN0603H4751BSTF | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603H4751BSTF) RoHS : Compliant |
| 10,000 | |
| F0603HI3000V032TM | AEM Inc | - Tape and Reel (Alt: F0603HI3000V032TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI5000V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 5 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI5000V032TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI4500V032TM | AEM Inc | - Tape and Reel (Alt: F0603HI4500V032TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI3500V032TM | AEM Inc | - Tape and Reel (Alt: F0603HI3500V032TM) RoHS : Not Compliant |
| 8,000 | ||
| T0603HI3000TM | AEM Inc | - Tape and Reel (Alt: T0603HI3000TM) RoHS : Not Compliant |
| 8,000 | ||
| AISC-0603HP-10NJ-T | Abracon Corporation | Wirewound Inductor, 10 nH, 60 Milliohm, ? 5%, 4.8 GHz, 1.35 A, 0603 [1608 Metric] - Tape and Reel (Alt: AISC-0603HP-10NJ-T) RoHS : Compliant |
| 6,000 | ||
| F0603HI1500V032TM | AEM Inc | - Tape and Reel (Alt: F0603HI1500V032TM) RoHS : Not Compliant |
| 4,000 | ||
| 809A060-3H | Glenair Inc | - Bulk (Alt: 809A060-3H) RoHS : Not Compliant |
| 1 | ||
| PHT0603H2002FG | Vishay Intertechnologies | - Waffle Pack (Alt: PHT0603H2002FG) RoHS : Not Compliant |
| 0 | ||
| QF0603H5A00T | AEM Inc | - Tape and Reel (Alt: QF0603H5A00T) RoHS : Not Compliant |
| 0 | ||
| ACP-16-03-H-00.25-T-S-M-1 | Samtec Inc | - Bulk (Alt: ACP-16-03-H-00.25-T-S-M-1) RoHS : Compliant | 0 | |||
| CA25C2603HNR | CTS Corporation | - Tape and Reel (Alt: CA25C2603HNR) RoHS : Compliant |
| 0 | ||
| AISC-0603HP-39NG-T | Abracon Corporation | IND 39.00 NH 0.680 A 180.00 MOHM - Tape and Reel (Alt: AISC-0603HP-39NG-T) RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R12J-T | Abracon Corporation | Wirewound Inductor, 120 nH, 650 Milliohm, ? 5%, 1.3 GHz, 420 mA, 0603 [1608 Metric] - Tape and Reel (Alt: AISC-0603HP-R12J-T) RoHS : Compliant |
| 0 | ||
![]() Newark | SF-0603HI200F-2 | Bourns Inc | Fuse, 2A, High Inrush Withstand, 0603; |Bourns, Inc. SF-0603HI200F-2 RoHS : Compliant |
| 7,720 | |
| F0603HI1000V032TM | AEM Inc | Fuse, High Inrush, 1A, 32Vdc, 0603; |Aem F0603HI1000V032TM RoHS : Compliant |
| 7,465 | ||
| F0603HI1000V032TM | AEM Inc | Fuse, High Inrush, 1A, 32Vdc, 0603; |Aem F0603HI1000V032TM RoHS : Compliant |
| 7,465 | ||
| T0603HI2500TM | AEM Inc | Fuse, High Inrush, 2.5A, 35Vdc, 0603; |Aem T0603HI2500TM RoHS : Compliant |
| 7,230 | ||
| T0603HI2500TM | AEM Inc | Fuse, High Inrush, 2.5A, 35Vdc, 0603; |Aem T0603HI2500TM RoHS : Compliant |
| 7,230 | ||
| SF-0603HI075F-2 | Bourns Inc | Fuse, 0.75A, High Inrush Withstand, 0603; |Bourns, Inc. SF-0603HI075F-2 RoHS : Compliant |
| 6,330 | ||
| SF-0603HI075F-2 | Bourns Inc | Fuse, 0.75A, High Inrush Withstand, 0603; |Bourns, Inc. SF-0603HI075F-2 RoHS : Compliant |
| 6,330 | ||
| TR-0603HV500-R | Eaton Electronics | Fuse, Fast Acting, 0.5A, 63Vdc, 0603; |Eaton Electronics TR-0603HV500-R RoHS : Compliant |
| 4,316 | ||
| TR-0603HV500-R | Eaton Electronics | Fuse, Fast Acting, 0.5A, 63Vdc, 0603; |Eaton Electronics TR-0603HV500-R RoHS : Compliant |
| 4,316 | ||
| QF0603H5A00T | AEM Inc | Automotive Fuse, Slow Blow, 5A, 32Vdc; |Aem QF0603H5A00T RoHS : Compliant |
| 3,480 | ||
| QF0603H5A00T | AEM Inc | Automotive Fuse, Slow Blow, 5A, 32Vdc; |Aem QF0603H5A00T RoHS : Compliant |
| 3,480 | ||
| SF-0603HI500M-2 | Bourns Inc | Fuse, 5A, High Inrush Withstand, 0603; |Bourns, Inc. SF-0603HI500M-2 RoHS : Compliant |
| 2,119 | ||
| SF-0603HI500M-2 | Bourns Inc | Fuse, 5A, High Inrush Withstand, 0603; |Bourns, Inc. SF-0603HI500M-2 RoHS : Compliant |
| 2,119 | ||
| TR-0603HV500-R | Eaton Bussmann | Fuse, Fast Acting, 0.5A, 63Vdc, 0603; |Eaton Bussmann TR-0603HV500-R RoHS : Compliant |
| 1,465 | ||
| TR-0603HV500-R | Eaton Bussmann | Fuse, Fast Acting, 0.5A, 63Vdc, 0603; |Eaton Bussmann TR-0603HV500-R RoHS : Compliant |
| 1,465 | ||
![]() Analog Devices Inc | LTM4603HVIV#PBF | Analog Devices Inc | 6A, 28VIN DC/DC micronMod w/ RoHS : Compliant |
| 1,571 | |
| LTM4603HVEV#PBF | Analog Devices Inc | 6A, 28VIN DC/DC micronMod w/ RoHS : Compliant |
| 10 | ||
![]() RS | 03450603H | Littelfuse Inc | FUSEHOLDER, 3AG/AB, HIGH PROFILE, FINGERGRIP KNOB, 3/16" R/A SLDR/QC, 20A, 250V RoHS : Compliant |
| 4,736 | |
| 2454167 (25533603) (HFI803704501NA-025RS) | RS Pro | 3/8-24 X 4 1/2 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 1 | ||
| 603HR015 | Ohmite Mfg Co | RESISTORS, CURRENT SENSE, THROUGH HOLE 1/4WATT .015OHM 3% RoHS : Not Compliant |
| 0 | ||
| ELM21603HD | Bivar Inc | VERTICAL LED ASSEMBLY, 0.160IN., 3MM, 2 LEAD, HE RED, DIFFUSED, BLACK PVC RoHS : Compliant |
| 0 | ||
| EM352603HC | Eaton Electronics | EUROMAG EM3526 SERIES, 03 POLE |
| 0 | ||
| ELM50603HDL | Bivar Inc | VERTICAL LED ASSEMBLY, 0.060IN., 3MM, 2 LEAD, HE RED, DIFFUSED, BLACK PVC RoHS : Compliant |
| 0 | ||
| SY5260-3H-C4 | SMC Corporation of America | VALVE, SOLENOID, 5 PORT, SY SERIES |
| 0 | ||
C0603H102J1GAC![]() | KEMET Corporation | 0603 C 1NF CERAMIC MULTILAYER CAPACITOR, 100 VDC, +200DEGC, C0G DIELEC, +/-5% RoHS : Compliant |
| 0 | ||
| TR-0603HV500-R | Eaton Electronics | 0603 63V ROHS CHIP FUSE COMMERCIAL 0.5A |
| 0 | ||
| SF-0603HI500M-2 | Bourns Inc | 0603 HIGH-INRUSH MULTILAYER 5A RoHS : Compliant |
| 0 | ||
| SF-0603HI075F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 0.75A RoHS : Compliant |
| 0 | ||
| SF-0603HI200F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 2A RoHS : Compliant |
| 0 | ||
| SF-0603HI050F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 0.5A RoHS : Compliant |
| 0 | ||
| SF-0603HI400F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 4A RoHS : Compliant |
| 0 | ||
| ODP-2-62060-3HF4N-MN | Invertek Drives Ltd | AC DRIVE, FRAME 6, 180A, 60HP, 3 PHASE, IP55/NEMA12, OLED KEYPAD, FILTER |
| 0 | ||
![]() Microchip Technology Inc | UES2603HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Bisco Industries | NAS6603H13 | NAS Bolts | 85 | |||
| PTTD603H | RIVETS | 48 | ||||
| NAS6603H10 | NAS Bolts | 10 | ||||
| ELM-21603HD | Bivar Inc | 8 | ||||
| NAS6603H1 | California Screw Products Inc | 6 | ||||
| NAS6603H6 | NAS Bolts | 6 | ||||
| NAS6603H31 | NAS Bolts | 1 | ||||
![]() Rochester Electronics | LTM4603HVEV#PBF | Analog Devices Inc | DC/DC CONVERTER 1 OUT 600mV to 5V 6A 30W 118-LGA Tray RoHS : Compliant |
| 24 | |
| ACML-0603H-221-T | Abracon Corporation | FERRITE BEAD 1A 0603 T/R RoHS : Compliant |
| 8,000 | ||
![]() Sager | FW-06-03-H-D-185-110-P-FR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | |
| MW-06-03-H-D-180-130 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FTMH-106-03-H-DV-ES | Samtec Inc | Headers & Wire Housings 1.00 mm Surface Mount Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MIT-076-03-H-D | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Mixed Technology High-Speed Terminal Strip RoHS : Compliant | 0 | |||
| MF2-X-00-560-3-HA6-2-C | Carling Technologies | Circuit Breakers | 0 | |||
| MW-36-03-H-D-231-065 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FTMH-106-03-H-DV-P-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| EM352603HC | Eaton Bussmann | Pluggable Terminal Blocks 3P EM3526 Series HC |
| 0 | ||
| ESQT-126-03-H-T-375 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SQT-106-03-H-S | Samtec Inc | Headers & Wire Housings Cost Effective Rugged PCB Sockets, 2.00mm pitch RoHS : Compliant |
| 0 | ||
| SSW-136-03-H-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 5D89603H04 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding EMOW,SilSd,MON,DC,PSA | 0 | |||
| ESQT-146-03-H-D-309 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ESQT-106-03-H-Q-309 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| FTM-126-03-H-DV-P-FR | Samtec Inc | Headers & Wire Housings | 0 | |||
![]() Coilcraft Direct | 0603HP-R15XGL | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 708,698 | |
| 0603HP-68NXGR | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 30,267 | ||
| 0603HP-22NXJE | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 8,884 | ||
| 0603HP-7N2XGRW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 8,024 | ||
| 0603HP-11NXJRW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 3,300 | ||
| 0603HP-56NXJR | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,901 | ||
| 0603HP-16NX | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,596 | ||
| 0603HP-4N3X | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,486 | ||
| 0603HP-24NXJLW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,507 | ||
| 0603HP-47NXJEW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,278 | ||
| 0603HP-5N6XJEW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 983 | ||
| 0603HP-R21XJL | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 840 | ||
| 0603HP-91NXGL | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 802 | ||
| 0603HC-10NXGR | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 798 | ||
| 0603HP-R21XGE | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
![]() TME | AIML-0603HC-4R7M-T![]() | Abracon Corporation | Inductor: ferrite; SMD; 0603; 4.7uH; R: 500mΩ; ±20%; -55÷125°C RoHS : Compliant |
| 32,000 | |
| AISC-0603HP-3N3B-T | Abracon Corporation | Inductor: wire; SMD; 0603; 3.3nH; 1.7A; 1.8x1.12mm; 35mΩ; -40÷125°C RoHS : Compliant |
| 2,695 | ||
| C0603H180J5GACT500 | YAGEO Corporation | Capacitor: ceramic; 18pF; 50VDC; C0G (NP0); ±5%; 1608 |
| 1,000 | ||
| 710-10603 HELATAPE FLEX1000+ | HellermannTyton | Tape: electrical insulating; W: 19mm; L: 20m; Thk: 0.18mm; blue; 300% |
| 1 | ||
| MCT0603HC1002FP500 | Vishay Intertechnologies | Resistor: thin film; 10kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
| MCT0603HC2493FP100 | Vishay Intertechnologies | Resistor: thin film; 249kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
| MCT0603HC2743FP100 | Vishay Intertechnologies | Resistor: thin film; 274kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
| MCT0603HC3403FP100 | Vishay Intertechnologies | Resistor: thin film; 340kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
| TR-0603HV500-R | Eaton Bussmann | Fuse: fuse; 1.6x0.81x0.48mm; SMD; 500mA; 63VDC; quick blow; 0603 |
| 0 | ||
| TR-0603HV1-5-R | Eaton Bussmann | Fuse: fuse; 1.6x0.81x0.48mm; SMD; 1.5A; 63VDC; quick blow; 0603 |
| 0 | ||
| EB2S 160/3HF 16A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 16A; 690VAC; IP20; MCCB |
| 0 | ||
| EB2S 160/3HF 20A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 20A; 690VAC; IP20; MCCB |
| 0 | ||
| SM0603HC | Bivar Inc | LED; red; SMD; 0603; 15mcd; 1.8VDC; 1.6x0.8mm; 130°; 20mA; λd: 640nm RoHS : Compliant |
| 0 | ||
| EB2S 160/3HF 63A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 63A; 690VAC; IP20; MCCB |
| 0 | ||
| MCT0603HC1152FP500 | Vishay Intertechnologies | Resistor: thin film; 11.5kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | BKP0603HS121T | TAIYO YUDEN | MULTILAYER CHIP BEAD INDUCTOR FOR POWER LINE Ferrite Chip, 0.85A RoHS : Compliant | 90,000 | ||
| ELM50603HDL | Bivar Inc | Optoelectronic Device RoHS : Compliant | 1,000 | |||
![]() Interstate Connecting Components | 809A060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY RoHS : Compliant |
| 13 | |
| 809B060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY RoHS : Compliant |
| 3 | ||
| 809SL060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY HAL SHRK BOOT RoHS : Compliant |
| 2 | ||
| 809S060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY ACCESSORY RoHS : Compliant |
| 0 | ||
| 2M809S060-3H | Amphenol Aerospace | 2M ACCESSORY | 0 | |||
| 10-041636-03H | Amphenol Industrial Operations | PLUG | 0 | |||
| 380FS103M1603H3 | Glenair Inc | EMI BACKSHELL, SPIN COUPLING 38999 SIII, SZ16 | 0 | |||
| 2M809A060-3H | Amphenol Aerospace | 2M SHRINK BOOT RIGHT ANGLE | 0 | |||
| 10-042636-03H | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 380AS001M1603H3 | Glenair Inc | SA- | 0 | |||
![]() NexGen Digital | PTN0603H2002BST1 | Vishay Huntington | 8,000 | |||
| BK0603HS121-T | TAIYO YUDEN | RoHS : Compliant | 7,653 | |||
C0603HQN201-100JNE![]() | VENKEL LTD | RoHS : Compliant | 1,697 | |||
C0603H103J3GAC![]() | KEMET Corporation | RoHS : Compliant | 694 | |||
| 0603HC-18NXJLW | Coilcraft Inc | RoHS : Compliant | 365 | |||
| 0603HP-11NXGLW | Coilcraft Inc | RoHS : Compliant | 175 | |||
![]() Powell Electronics | 809A060-3H | Glenair Inc | SHRINK BOOTS - SHAPE MEMORY PRODUCTS RoHS : Compliant |
| 223 | |
| 809S060-3H | Glenair Inc | SHRINK BOOTS - SHAPE MEMORY PRODUCTS RoHS : Compliant |
| 105 | ||
| IS-C1603H | NKK Switches | CONTROLLER, FOR LCD 64X32 RGB 16SW, 4BIT |
| 1 | ||
![]() Richardson RFPD | LTM4603HVEV#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 118-Pin LGA Tray RoHS : Compliant |
| 0 | |
| 0603HP180FT250 | Kyocera AVX Components | MULTILAYER CERA CAP RoHS : Compliant | 0 | |||
| LTM4603HVIV#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 118-Pin LGA Tray RoHS : Compliant |
| 0 | ||
| 0603HP180FT250T | Kyocera AVX Components | MULTILAYER CERA CAP RoHS : Compliant | 0 | |||
| TAS0182603HE | Powerex Power Semiconductors | PHASE CNTL THYRISTOR RoHS : Compliant | 0 | |||
| TU.60.3H31 | Taoglas Antenna Solutions | Terminal Mount Ultra-Wideband Antenna RoHS : Compliant |
| 0 | ||
| ACML-0603H-601-T | Abracon Corporation | Ferrite Beads Multi-Layer High Current 600Ohm 25% RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | MCT0603HZ0000ZP500 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 19,436 | ||
| CC0603HX7R153K | TDK Corporation | INSTOCK | 8,000 | |||
| V9MLA0603H | Littelfuse Inc | INSTOCK RoHS : Compliant | 6,744 | |||
| CC0603HNPO222J | TDK Corporation | INSTOCK | 4,000 | |||
| V3.5MLA0603H | Littelfuse Inc | INSTOCK RoHS : Compliant | 2,465 | |||
| CC0603HNP0120J | INSTOCK | 2,000 | ||||
| 0603HL-471XJRC | INSTOCK | 2,000 | ||||
| PCF50603HN/05/N3 | INSTOCK | 1,742 | ||||
| 0603HP-R39XGLW | INSTOCK | 1,678 | ||||
| V5.5MLA0603H | Littelfuse Inc | INSTOCK RoHS : Compliant | 1,340 | |||
| TMPC0603H-1R0M-Z01-D | INSTOCK | 572 | ||||
| V5.5MLA0603H | INSTOCK | 268 | ||||
| 0603HP-56NXJLU | INSTOCK | 129 | ||||
| TMPC0603H-4R7M-Z01-D | INSTOCK | 129 | ||||
| RP03603HBLD | METZ CONNECT USA | INSTOCK RoHS : Compliant | 34 | |||
![]() Avnet Abacus | ACML-0603H-221-T | Abracon Corporation | - Tape and Reel (Alt: ACML-0603H-221-T) RoHS : Compliant | 48,000 | ||
| SF-0603HI050F-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603HI050F-2) RoHS : Compliant | 8,000 | |||
| QF0603H5A00T | AEM Inc | Fuse Automotive Chip Slow Blow 5 A 32 VDC 16mm x 08mm x 08mm SolidMatrix QF0603H (Alt: QF0603H5A00T) RoHS : Compliant | 0 | |||
| CA70C1603HLT | CTS Corporation | - Tape and Reel (Alt: CA70C1603HLT) RoHS : Compliant | 0 | |||
| P0603H1002DNT | Vishay Intertechnologies | High Precision Wraparound Thin Film Chip Resistor 0603 Size 10K Ohm 05 0125 W 50 ppmC 2Pin SMD TR - Tape and Reel (Alt: P0603H1002DNT) RoHS : Compliant | 0 | |||
| PTN0603H1001FBT1 | Vishay Intertechnologies | SMD Chip Resistor 1 kohm 1 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603H1001FBT1) RoHS : Not Compliant | 0 | |||
| CC0603HX7R102KTR | TDK Corporation | TDKCC0603HX7R102KTR (Alt: CC0603HX7R102KTR) RoHS : Compliant | 0 | |||
| F0603HI6000V032TM | AEM Inc | SMD Fuse High Inrush Current Withstand 6 A 32 VDC 0603 1608 Metric SolidMatrix HI (Alt: F0603HI6000V032TM) RoHS : Compliant | 0 | |||
| AISC-0603HP-R12J-T | Abracon Corporation | Wirewound Inductor 120 nH 650 Milliohm 5 13 GHz 420 mA 0603 1608 Metric - Tape and Reel (Alt: AISC-0603HP-R12J-T) RoHS : Compliant | 0 | |||
| MCT0603HC6980FP100 | Vishay Intertechnologies | SMD Chip Resistor 698 Ohm 1 125 mW 0603 1608 Metric Thin Film Established Reliability - Tape and Reel (Alt: MCT0603HC6980FP100) RoHS : Compliant | 0 | |||
| MCT0603HC7152FP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT0603HC7152FP100) RoHS : Compliant | 0 | |||
| MCT0603HC8663FP100 | Vishay Intertechnologies | MCT 060350 1 VG01 P1 866K - Tape and Reel (Alt: MCT0603HC8663FP100) RoHS : Compliant | 0 | |||
| MCT0603HE3011BP100 | Vishay Intertechnologies | SMD Chip Resistor 301 kOhm 01 125 mW 0603 1608 Metric Thin Film Established Reliability - Tape and Reel (Alt: MCT0603HE3011BP100) RoHS : Compliant | 0 | |||
| MCT0603HZ0000ZP500 | Vishay Intertechnologies | MCT 0603 VG01 P5 0R0 - Tape and Reel (Alt: MCT0603HZ0000ZP500) RoHS : Compliant | 0 | |||
| MCT0603HC1912FP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT0603HC1912FP100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | F0603HI4000V032T | AEM Inc | (Alt: F0603HI4000V032T) RoHS : Compliant | 0 | ||
| P0603H2003WNT | Vishay Intertechnologies | Res Anti-Sulfured/Precision Thin Film 0603 200k Ohm 0.05% 1/8W ?50ppm/?C Molded T/R (Alt: P0603H2003WNT) RoHS : Compliant | 0 | |||
| F0603HI3500V032T | AEM Inc | (Alt: F0603HI3500V032T) RoHS : Compliant | 0 | |||
| F0603HI6000V032T-GNT | AEM Inc | (Alt: F0603HI6000V032T-GNT) RoHS : Compliant | 0 | |||
| F0603HI8000V032T | AEM Inc | (Alt: F0603HI8000V032T) RoHS : Compliant | 0 | |||
| AISC-0603HP-R10J-T | Abracon Corporation | Wirewound Inductor, 100 nH, 540 Milliohm, ? 5%, 1.4 GHz, 470 mA, 0603 [1608 Metric] (Alt: AISC-0603HP-R10J-T) RoHS : Compliant |
| 0 | ||
| F0603HI3000V032TM | AEM Inc | (Alt: F0603HI3000V032TM) RoHS : Compliant |
| 0 | ||
| F0603HI5000V032T | AEM Inc | (Alt: F0603HI5000V032T) RoHS : Compliant | 0 | |||
| F0603HI1000V032T | AEM Inc | (Alt: F0603HI1000V032T) RoHS : Compliant | 0 | |||
| PE-0603HFB601ST | Pulse Electronics Corporation | Ferrite Bead, 0603 [1608 Metric], 600 Ohm, 500 mA, 350 Milliohms, ? 25% (Alt: PE-0603HFB601ST) RoHS : Compliant | 0 | |||
| F0603HI1500V032T | AEM Inc | Fuse Chip 1.5A 32VDC High Inrush Current 2-Pin SMD T/R (Alt: F0603HI1500V032T) RoHS : Compliant | 0 | |||
| P-0603H1001BST0 | Vishay Intertechnologies | P-0603 50PPM 1K 0.1% S T0 e1 (Alt: P-0603H1001BST0) RoHS : Compliant | 0 | |||
| CPS8603HR-T0 | ConvenientPower | (Alt: CPS8603HR-T0) RoHS : Compliant | 0 | |||
| F0603HI2000V032T | AEM Inc | (Alt: F0603HI2000V032T) RoHS : Compliant |
| 0 | ||
| T0603HI4000TM | AEM Inc | (Alt: T0603HI4000TM) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AISC-0603HP-39NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-0603HP-R12J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R20K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R33G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-30NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-9N5J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R25K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-12NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-51NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R15K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-6N8K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-8N7J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-68NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-91NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R22K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | NPO0603HTTD331J![]() | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 19,000 | |
| NPO0603HTTD220J | KEMET Corporation | IN STOCK SHIP TODAY |
| 8,174 | ||
| X7R0603HTTD472K T/R | KOA Speer Electronics Inc | IN STOCK SHIP TODAY | 4,000 | |||
| CC0603HX7R103KTR | TDK Corporation | IN STOCK SHIP TODAY RoHS : Unknown |
| 3,340 | ||
| LFBK0603HS601-T | TAIYO YUDEN | IN STOCK SHIP TODAY |
| 3,000 | ||
X7R0603HTTD152K![]() | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,650 | ||
| 0603HC-18NXJLW | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | ||
| V9MLA0603H | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Unknown |
| 2,000 | ||
| 0603HP-8N2XGLW | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,945 | ||
| PTN0603H1501BSTS | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,527 | ||
| 0603HC-3N9XJBW | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,500 | |||
| 0603HC-18NXJBW | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 900 | ||
| 0603HC-15NXJBU | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 270 | ||
| 0603HC-3N9XJBU | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 195 | ||
| 0603HP-3N9XJLU | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 95 | ||
![]() EBV Elektronik | MFS2603HMBA0AD | NXP Semiconductors | EFS26 (Alt: MFS2603HMBA0AD) RoHS : Compliant | 0 | ||
| PFS2603HMBK9AD | NXP Semiconductors | SOT1571eFS26 12NC 935466770557 (Alt: PFS2603HMBK9AD) RoHS : Compliant | 0 | |||
| PFS2603HMBK9ADR2 | NXP Semiconductors | HLQFP48 eFS26 (Alt: PFS2603HMBK9ADR2) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 594R603H06 | BJG Electronics | BJG Microwave C | 159 | ||
| 594R603H03-AUDS | BJG Electronics | BJG Microwave C | 80 | |||
| 594R603H13 | BJG Electronics | BJG Microwave C | 63 | |||
| 594R603H02-NIDS | BJG Electronics | BJG Microwave C | 36 | |||
| 594R603H02-ENG | BJG Electronics | BJG Microwave C | 35 | |||
| 594R603H03-ENG | BJG Electronics | BJG Microwave C | 20 | |||
| 594R603H03 | BJG Electronics | BJG Microwave C | 20 | |||
| 594R603H14-RPL | BJG Electronics | BJG Microwave C | 11 | |||
| 594R603H01-C1-BJG | BJG Electronics | BJG Microwave C | 7 | |||
| 594R603H07-C1 | BJG Electronics | BJG Microwave C | 7 | |||
| 594R603H08-TD | BJG Electronics | BJG Microwave C | 7 | |||
| 594R603H10-C3 | BJG Electronics | BJG Microwave C | 4 | |||
| 594R603H08-QUAL | BJG Electronics | BJG Microwave C | 1 | |||
| 594R603H09-QUAL | BJG Electronics | BJG Microwave C | 1 | |||
| 594R603H16-QUAL | BJG Electronics | BJG Microwave C | 1 | |||
![]() Maritex | C0603H472J1GAC7867![]() | KEMET Corporation | Ceramic Capacitors; C0603H472J1GAC7867; KEMET RoHS : Compliant |
| 21 | |
![]() Neutron USA | 8020.0603.H.PT | Schurter Electronic Components | Cartridge Fuses SUT-H 6.3x32 PT Fuse T 12A RoHS : Compliant |
| 50 | |
| 03450603H | Littelfuse Inc | Fuse Holder; Shock-Safe; Finger Grip Knob; Front Mnt; Rt Angle Term.; for 3AG Fuses RoHS : Compliant |
| 50 | ||
| 8020.0603.H | Schurter Electronic Components | Cartridge Fuses SUT-H 6.3x32 Fuse T 12A RoHS : Compliant |
| 50 | ||
| 603HG079184X | Switchcraft Conxall | Specialized Cables 2M Mini-XLR Cable 3P F Socket to Stip/Tin |
| 46 | ||
![]() Pasternack Enterprises US | PE3W04603/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Low Loss Cable Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 1,135 | ||
| PE3W04603/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Female Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-36 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-36 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-36 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-36 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Female Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-24 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-24 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-24 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-24 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-60 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-60 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-60 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-60 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE33603/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Female Cable 48 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female cable 48 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 48 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33603/HS-48 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33603/HS-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33603/HS-48 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 48 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE3C1603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C2603/HSWH | Pasternack Enterprises | 0 | ||||
| PE33603/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Female Cable 24 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female cable 24 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 24 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33603/HS-24 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33603/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33603/HS-24 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 24 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE33603/HS-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to SMA Female Cable 6 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female cable 6 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 6 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33603/HS-6 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33603/HS-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33603/HS-6 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 6 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE3C2603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600 Coax with Hea. PE3C2603/HS is a N male to N male cable using LMR-600 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2603/HS N male to N male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33603/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Female Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 12 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33603/HS-12 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33603/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33603/HS-12 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 12 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE3C2603/HSBL | Pasternack Enterprises |
| 0 | |||
| PE33603/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female cable using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33603/HS can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33603/HS is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33603/HS can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable using RG316-DS coax with heatshrink. | 0 | |||
| PE3C2603/HSGR | Pasternack Enterprises | 0 | ||||
| PE3C8603/HS | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | C0603HQN201-6R8BNE![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;6.8pF;�0.1pF RoHS : Compliant | 40,000 | ||
| C0603HQN101-160GNP | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;100V;16pF;�2% RoHS : Compliant | 4,000 | |||
C0603HQN201-120FNP![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;12pF;�1% RoHS : Compliant | 4,000 | |||
C0603HQN101-1R8ANP![]() | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;1.8pF;�0.05pF RoHS : Compliant | 0 | |||
C0603HQN101-220JNP![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;100V;22pF;�5% RoHS : Compliant | 0 | |||
| C0603HQN101-2R5CNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;2.5pF;�0.25pF RoHS : Compliant | 0 | |||
| C0603HQN101-4R4BNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;4.4pF;�0.1pF RoHS : Compliant | 0 | |||
| C0603HQN101-5R1DNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;5.1pF;�0.5pF RoHS : Compliant | 0 | |||
| C0603HQN101-7R0CNP | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;100V;7pF;�0.25pF RoHS : Compliant | 0 | |||
| C0603HQN101-9R7DNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;9.7pF;�0.5pF RoHS : Compliant | 0 | |||
C0603HQN201-0R3BNP![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;0.3pF;�0.1pF RoHS : Compliant | 0 | |||
C0603HQN201-270JNP![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;27pF;�5% RoHS : Compliant | 0 | |||
| C0603HQN201-2R2ANP | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;2.2pF;�0.05pF RoHS : Compliant | 0 | |||
C0603HQN201-5R6DNP![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;200V;5.6pF;�0.5pF RoHS : Compliant | 0 | |||
| C0603HQN250-101GNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;25V;100pF;�2% RoHS : Compliant | 0 | |||
![]() Vyrian | PHT0603H2943FGT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.0375W, 294000ohm, 75V, 1% +/-Tol, 55ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 18,728 | ||
| PHT0603H2103FGW | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.0375W, 210000ohm, 75V, 1% +/-Tol, 55ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 17,652 | |||
| BKP0603HM121-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 17,357 | |||
| BK0603HR102-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.22A, 2 Pin(s) RoHS : Compliant | 15,595 | |||
| C0603H472F5GAC7867 | KEMET Corporation | Ceramic Capacitor, Ceramic, 50V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.0047uF, 0603 | 13,839 | |||
| BKP0603HM100-T | TAIYO YUDEN | Ferrite Chip, 1.3A RoHS : Compliant | 12,033 | |||
| LTM4603HVEV-PBF | Analog Devices Inc | 9,196 | ||||
| LTM4603HVEV#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 1000kHz Switching Freq-Max RoHS : Compliant | 8,072 | |||
| LTM4603HVIV-PBF | Analog Devices Inc | 7,776 | ||||
| UES2603HR2 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 2 Element, 30A, 150V V(RRM), Silicon, TO-3 RoHS : Not Compliant | 5,662 | |||
| EPF8452AQC160-3H | Intel / Altera | Loadable PLD, CMOS, PQFP160 | 1,708 | |||
| C0603H472F5GAE | KEMET Corporation | Ceramic Capacitor, Ceramic | 816 | |||
| C0603H103J3GACT100 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.01uF, Surface Mount, 0603 | 626 | |||
| 0603HP-56NXJEW | Coilcraft Inc | General Purpose Inductor, 0.056uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Compliant | 461 | |||
| PTN0603H5172BST1 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.15W, 51700ohm, 75V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 269 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |