| Motore di ricerca datesheet componenti elettronici |
|
6220CCNUNNTZCWC Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | PIC16C622-04/P![]() | Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 2,475 | |
PIC16C622-04I/SO![]() | Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 814 | ||
| MO9062-20 | Microchip Technology Inc | K-Band Detector, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| 131-62209-22-2 | Microchip Technology Inc | IC MEM NAND FLASH 2G 8-BIT TSOP-48 IND TEMP, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
PIC16C622-04/SO![]() | Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
DSC1101CM2-062.2080![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2041-07-06 RoHS : Compliant |
| 0 | ||
DSC1121CM2-062.2080![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2041-11-07 RoHS : Compliant |
| 0 | ||
DSC1101CM2-062.2080T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-04-26 RoHS : Compliant |
| 0 | ||
DSC1121CM2-062.2080T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-04-12 RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | AT62-201-16141 | Amphenol Sine Systems | Size 16 Skt Contact Machined 1620AWG |
| 126,611 | |
| AT62-203-12141 | Amphenol Sine Systems | Sz 12 Skt Contact Machined 1214AWG |
| 92,213 | ||
| AT62-201-20141 | Amphenol Sine Systems | Size 20 Socket Contact Machined 20AWG |
| 30,538 | ||
| AT62-203-08141 | Amphenol Sine Systems | Size 8 Skt Contact Machined 810AWG |
| 25,491 | ||
| CTC-0062-20-9/5-9 | TE Connectivity | CABLE-PROTECTION PART CTC-0062-20-9/5-9 RoHS : Compliant |
| 2,476 | ||
| 68016-220HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,780 | ||
| 622046-000 | TE Connectivity | Solder Sleeves RoHS : Not Compliant |
| 438 | ||
| 0904-206-2202 | TE Connectivity | DEUTSCH CONNECTOR 0904-206-2202 |
| 227 | ||
| 6-2208775-4 | TE Connectivity | Connectors RoHS : Compliant |
| 105 | ||
| T2120062201-001 | TE Connectivity | TE COMPONENT T2120062201-001 RoHS : Compliant |
| 47 | ||
| 88-462202-98P | Amphenol Corporation | RECEPT |
| 5 | ||
| 622025-000 | TE Connectivity | solder sleeve RoHS : Not Compliant |
| 2 | ||
| 87-462201-35P | Amphenol Corporation | RECEPT |
| 1 | ||
| M85049/62-20N | Glenair Inc | SHRINK BOOT ADAPTERS |
| 1 | ||
| 87-462202-98P | Amphenol Corporation | RECEPT |
| 1 | ||
![]() Avnet Silica | AP62200WU-7 | Diodes Incorporated | DCDC Switching Regulator Adjustable Synchronous Buck Step Down Single Output 800 mV to 7 V (Alt: AP62200WU-7) RoHS : Compliant | 573,000 | ||
| AP62201WU-7 | Diodes Incorporated | (Alt: AP62201WU-7) RoHS : Compliant | 30,000 | |||
| XC6220B331PR-G | Torex Semiconductor LTD | (Alt: XC6220B331PR-G) RoHS : Compliant | 3,000 | |||
| AP62200Z6-7 | Diodes Incorporated | (Alt: AP62200Z6-7) RoHS : Compliant | 0 | |||
| XC6220B101ER-G | Torex Semiconductor LTD | (Alt: XC6220B101ER-G) RoHS : Compliant | 0 | |||
| XC6220B28BPR-G | Torex Semiconductor LTD | (Alt: XC6220B28BPR-G) RoHS : Compliant | 0 | |||
| XC6220B251PR-G | Torex Semiconductor LTD | (Alt: XC6220B251PR-G) RoHS : Compliant | 0 | |||
| XC6220B332PR-G | Torex Semiconductor LTD | TORXC6220B332PRG (Alt: XC6220B332PR-G) RoHS : Compliant | 0 | |||
| XC6220B13BPR-G | Torex Semiconductor LTD | (Alt: XC6220B13BPR-G) RoHS : Compliant | 0 | |||
PIC16C622-04/P![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 35KB EPROM 33V5V 18Pin PDIP Tube (Alt: PIC16C622-04/P) RoHS : Compliant | 0 | |||
| XC6220B351MR-G | Torex Semiconductor LTD | (Alt: XC6220B351MR-G) RoHS : Compliant | 0 | |||
PIC16C622-04I/SO![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 35KB EPROM 33V5V 18Pin SOIC W Tube (Alt: PIC16C622-04I/SO) RoHS : Compliant | 0 | |||
| C16220_STRADELLA-16-T1-A | LEDIL | Rectangle Lens Array for LUXEON 3030 2DNFSx757G Series LEDS (Alt: C16220_STRADELLA-16-T1-A) RoHS : Compliant | 0 | |||
| SMJD-3622012F-XX1500D95C057ALL | Seoul Semiconductor | DC Module 2X6 zhaga book 153950 Lumen225WCCT 5000KCRI705 STEP (Alt: SMJD-3622012F-XX1500D95C057ALL) RoHS : Compliant | 0 | |||
| SMJD-3622012F-X41500D64C058ALL | Seoul Semiconductor | LED Module Rectangle 12 LEDs 5000K Surface Mount Tray (Alt: SMJD-3622012F-X41500D64C058ALL) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | M39006/22-0505 | Vishay Intertechnologies | RoHS : Not Compliant | 5 | ||
![]() Component Electronics, Inc | RMC1/16-220-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 20,000 | |
| CAT16-220J4 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11,905 | ||
| CR16-220-JF | ASJ Holdings Limited | IN STOCK SHIP TODAY |
| 5,000 | ||
| CR16-220-JL | ASJ Holdings Limited | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| RC06220JR | YAGEO Corporation | IN STOCK SHIP TODAY |
| 4,500 | ||
| RMC1/16-220R-5% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,000 | ||
| 2322-724-62202L | YAGEO Corporation | IN STOCK SHIP TODAY | 3,780 | |||
| 2322-704-62209L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,500 | ||
| 2322-704-62203 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,000 | ||
| RMCF1/16-220K-5%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 2,300 | ||
| 4-1622000-2 | Neohm Componenti srl | IN STOCK SHIP TODAY |
| 940 | ||
IPM6220ACA![]() | Intersil Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 778 | ||
| 2322-704-62201L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 500 | ||
| LCH1816-220K-TR | ISI | IN STOCK SHIP TODAY | 194 | |||
| M39006/22-0168 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 21 | ||
![]() EBV Elektronik | S00016220057 | SIMCom | BAC BTB 6PIN PLUG RO (Alt: S00016220057) RoHS : Compliant | 0 | ||
| ASSR-V622-002E | Broadcom Limited | MOSFET Relay 375 kV 30 mA (Alt: ASSR-V622-002E) RoHS : Compliant | 0 | |||
| TB62209FG(O,EL) | Toshiba America Electronic Components | Stepper Motor Driver 5V 38Pin362Tab HSOP TR (Alt: TB62209FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62206FG(O,EL) | Toshiba America Electronic Components | 2Phase Stepping Motor Driver 5V 22Pin202Tab HSOP TR (Alt: TB62206FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62208FTG(O,C8,EL | Toshiba America Electronic Components | (Alt: TB62208FTG(O,C8,EL) RoHS : Compliant | 0 | |||
| C16220_STRADELLA-16-T1-A | LEDIL | Rectangle Lens Array for LUXEON 3030 2DNFSx757G Series LEDS (Alt: C16220_STRADELLA-16-T1-A) RoHS : Compliant | 0 | |||
![]() ECCO | 143-3622-000-MS | ITT Interconnect Solutions |
| 558 | ||
| 011-0622-000 | ITT Interconnect Solutions |
| 420 | |||
| 0110622000 | ITT Interconnect Solutions |
| 420 | |||
![]() Pasternack Enterprises US | PE3W06662-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. QMA Male Right Angle to SMA Male Cable 200 cm Length Using LMR-195 Coax., Radio frequency assembly QMA male right angle to SMA male cable 200 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male right angle to SMA male cable 200 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle QMA cable connection on one end and SMA cable connection on the other. Our right angle QMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to SMA cable is a male to male coax assembly, PE3W06662-200CM, can also be known as a right angle QMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA plug cable assembly PE3W06662-200CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06662-200CM can also be used in the other direction and will be SMA male to right angle QMA male cable assembly if the opposite connectivity is required. QMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to SMA male cable 200 cm length using LMR-195 coax. |
| 233 | |
| PE3W14562-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 200 CM Length Using LMR-100A-UF Coax., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 200 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 200 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14562-200CM can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14562-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle BNC male to right angle BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14562-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 217 | ||
| PE3C6362-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Fire Rated N Male to NEX10 Male Low PIM Cable 200 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable is a male to male coax assembly, PE3C6362-200CM, can also be known as a low PIM TC-250-NM-LP type N plug to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6362-200CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6362-200CM can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to TC-250-NM-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts. |
| 129 | ||
| PE3W05762-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Reverse Polarity TNC Female Bulkhead to SSMC Plug Right Angle Cable 200 cm Length Using RG188 Coax., Radio frequency assembly reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our reverse polarity TNC to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity TNC to SSMC cable is a female to plug coax assembly, PE3W05762-200CM, can also be known as a reverse polarity TNC jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to SSMC male cable assembly PE3W05762-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency reverse polarity TNC female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05762-200CM can also be used in the other direction and will be right angle SSMC plug to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SSMC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax. |
| 89 | ||
| PE3C6220-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-60, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-60 can also be used in the other direction and will be TC-SPP250-NF-LP N type female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-36, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-36 can also be used in the other direction and will be TC-SPP250-NF-LP N type female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP N type cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly PE3C6220-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-100CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6220-150CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-150CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PEWAN062-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 20 dBi Gain,. Pasternack’s PEWAN062-20 WR-62 waveguide horn is also known as a waveguide horn antenna. This WR-62 waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 12.4 to 18 GHz. The antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. Our WR-62 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-62 antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 19 | ||
| PE3WAN062-20SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi Gain, SMA Female Connector with Weather Resistant Radome Cover. The PE3WAN062-20SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a weather-resistant radome cover and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE3WAN062-20SF waveguide horn antenna with a weather-resistant radome cover has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.5 inches, a width of 3.04 inches, and a weight of 0.4 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PEWAN062-20NM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Male connector. The PEWAN062-20NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20NM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.45 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PEWGCOV062-20 | Pasternack Enterprises | Key Specifications, Product Type: Horn Covers, Waveguide Size: WR-62, Body Material: Polymethacrylimide (PMI). Standard Gain Horn Radome Cover for PEWAN062-20 Horn Antenna. PEWGCOV062-20 is a radome cover for PEWAN062-20 20 dBi WR-62 Standard Gain Horn antenna. This waveguide antenna radome cover is made from high strength, thermally stable Polymethacrylimide (PMI). PMI offers a low Relative Permittivity (Dielectric Constant) at the high frequency ranges seen with microwave and millimeter wave components. This allows for minimal signal loss or attenuation over other materials. Increase your system capabilities with our PMI radome covers, designed to enhance the durability and longevity of standard gain horn antennas. Shielding against environmental elements, our radome covers ensure consistent signal integrity in any conditions. PEWGCOV062-20 has internal dimensions of 3.2 in by 2.4 in and will fit 20 dBi WR-62 standard gain horns. Pasternack offers a wide selection of high performance waveguide components available in stock and same-day shipping to customers worldwide. |
| 2 | ||
| PE1WAN062-20SM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, SMA Male connector, Integrated Cage-Style Mount. The PE1WAN062-20SM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20SM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.22 inches, a width of 7.76 inches, and a weight of 1.08 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3C2162-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C2162-200CM, can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE1WAN062-20ELSF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, End Launch SMA Female connector, Integrated Cage-Style Mount. The PE1WAN062-20ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20ELSF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.53 inches, a width of 7.76 inches, and a weight of 1.14 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
![]() Teledyne HiRel | 5962-8762201FA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | ||
| 5962-8762201EA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| 5962-87622012A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
![]() Vyrian | LT6220CS5#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 4500uV Offset-Max, BIPolar, PDSO5 RoHS : Compliant | 11,513 | ||
| LT6220CS5#TRMPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 4500uV Offset-Max, BIPolar, PDSO5 RoHS : Compliant | 11,139 | |||
| LT6220CS5-TRPBF | Analog Devices Inc | 9,519 | ||||
| LT6220CS8-TRPBF | Analog Devices Inc | 9,009 | ||||
LNBTVS6-220S![]() | STMicroelectronics | Trans Voltage Suppressor Diode, 3000W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB RoHS : Compliant | 8,519 | |||
| LT6220CS5#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 4500uV Offset-Max, BIPolar, PDSO5 RoHS : Not Compliant | 8,108 | |||
| LT6220CS5-TRMPBF | Analog Devices Inc | 7,788 | ||||
| LT6220CS5#TRM | Analog Devices Inc | Operational Amplifier, 1 Func, 4500uV Offset-Max, BIPolar, PDSO5 RoHS : Not Compliant | 7,706 | |||
| LT6220CS8#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 3500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 7,183 | |||
| LT6220CS8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 3500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 6,728 | |||
| LT6220CS8-PBF | Analog Devices Inc | 6,483 | ||||
| LT6220CS5 | Analog Devices Inc | Operational Amplifier, 1 Func, 3500uV Offset-Max, BIPolar, PDSO5 RoHS : Not Compliant | 6,212 | |||
| LT6220CS8 | Analog Devices Inc | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 5,956 | |||
| LT6220CS8#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 3500uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 4,964 | |||
LT6220IS5![]() | Linear Technology | Operational Amplifier, 1 Func, 4500uV Offset-Max, BIPolar, PDSO5 RoHS : Not Compliant | 669 | |||
![]() Waytek, Inc. | AT62-201-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194 |
| 190,493 | |
| AT62-209-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 |
| 104,269 | ||
| AT62-203-12141 | Amphenol Sine Systems | ATP/AHD-6 Female Nickel Socket Contact 14-12GA Size 12 Solid 0462-203-12141 |
| 42,444 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122 |
| 36,000 | ||
| AT62-201-20141 | Amphenol Sine Systems | ATM Female Nickel Socket Contact 22-20GA Size 20 Solid 634 0462-201-20141 Size Change |
| 25,013 | ||
| AT62-201-1631 | Amphenol Sine Systems | AT/AHD-9 Female Gold Socket Contact 20-16GA Size 16 Solid 0462-201-1631 |
| 18,763 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Loose Socket CONTACT SIZE 20 S&F 22-16GA TOOL 636 1062-20-0122 NICKEL |
| 12,071 | ||
| AT62-203-08141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 2,143 | ||
| AT62-203-04141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-04141 ATHD female socket terminal is a size 4 connector socket for 6 gauge wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 1,214 | ||
![]() Win Source Electronics | TPS62203DBVTG4![]() | Texas Instruments | HIGH-EFFICIENCY, SOT23 STEP-DOWN, DC-DC CONVERTER RoHS : Compliant |
| 360,000 | |
| TPS562208DDC | Texas Instruments | Step-Down Converter 17V 2A SOT-23-6 |
| 250,000 | ||
| TPS562208DDCR/TPS562208DDCT | Texas Instruments |
| 232,930 | |||
TPS562208DDCR![]() | Texas Instruments | Conv DC-DC 4.5V to 17V Synchronous Step Down Single-Out 0.76V to 7V 2A 6-Pin TSOT-23 T/R / IC REG BUCK ADJ 2A SYNC SOT-23-6 RoHS : Compliant |
| 231,930 | ||
| AP62200Z6-7 | Diodes Incorporated | DCDC CONV HV BUCK SOT563 / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 2A SOT-563, SOT-666 RoHS : Compliant |
| 120,000 | ||
| TPS562201DDCR/TPS562201DDCT | Texas Instruments |
| 93,430 | |||
TPS562209DDCR![]() | Texas Instruments | Conv DC-DC 4.5V to 17V Synchronous Step Down Single-Out 0.76V to 7V 3A 6-Pin TSOT-23 T/R / IC REG BUCK ADJ 2A SYNC SOT-23-6 RoHS : Compliant |
| 93,360 | ||
| RT6220AGQUF | Richtek Technology Corp | IC REG BUCK ADJ 6A 16UQFN RoHS : Compliant |
| 66,000 | ||
TPS62200DBVRG4![]() | Texas Instruments | Conv DC-DC 2.5V to 6V Synchronous Step Down Single-Out 0.7V to 6V 0.3A 5-Pin SOT-23 T/R / IC REG BCK ADJ 0.3A SYNC SOT23-5 RoHS : Compliant |
| 60,000 | ||
TPS62203DBVRG4![]() | Texas Instruments | IC REG BUCK 3.3V 0.3A SYNC SOT23 RoHS : Compliant |
| 30,000 | ||
TPS62203DBVR![]() | Texas Instruments | Conv DC-DC 2.5V to 6V Synchronous Step Down Single-Out 3.3V 0.3A 5-Pin SOT-23 T/R / IC REG BUCK 3.3V 0.3A SYNC SOT23 RoHS : Compliant |
| 25,680 | ||
TPS62202DBV![]() | Texas Instruments | HIGH-EFFICIENCY, SOT23 STEP-DOWN, DC-DC CONVERTER RoHS : Compliant |
| 24,000 | ||
| AON6220 | Alpha & Omega Semiconductor | MOSFET N-CHANNEL 100V 48A 8DFN RoHS : Compliant |
| 18,800 | ||
TPS62203DBVT![]() | Texas Instruments | IC REG BUCK 3.3V 0.3A SYNC SOT23 RoHS : Compliant |
| 12,000 | ||
TLE6220GPAUMA2![]() | Infineon Technologies AG | IC PWR SWITCH N-CHAN 1:1 DSO-20 / Power Switch/Driver 1:1 N-Channel 3A PG-DSO-20-37 RoHS : Compliant |
| 920 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |