| Motore di ricerca datesheet componenti elettronici |
|
7262L-R Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() DigiKey | TPS72625KTTT | Rochester Electronics LLC | IC REG LINEAR 2.5V 1A TO263 |
| 15,555 | |
| TPS72625KTTR | Rochester Electronics LLC | IC REG LINEAR 2.5V 1A TO263 |
| 8,995 | ||
| 7262 | Keystone Electronics Corp | JACK SCREW HEX 4-40 |
| 3,038 | ||
AD7262BSTZ![]() | Analog Devices Inc | IC ADC 12BIT 48-LQFP RoHS : Compliant |
| 383 | ||
| 18QHTF57-26.250-OE | Mercury Electronic Ind Co Ltd | 26.25 MHz XO 1.8V 7.0X5.0 MM OE |
| 250 | ||
| 25QHTF57-2.6248-PD | Mercury Electronic Ind Co Ltd | 2.6248 MHz XO 2.5V 7.0X5.0 MM PD |
| 250 | ||
| 25QHTF57-2.6248-OE | Mercury Electronic Ind Co Ltd | 2.6248 MHz XO 2.5V 7.0X5.0 MM OE |
| 250 | ||
| 18QHTF57-2.6248-PD | Mercury Electronic Ind Co Ltd | 2.6248 MHz XO 1.8V 7.0X5.0 MM PD |
| 250 | ||
| 18QHTF57-26.2144-OE | Mercury Electronic Ind Co Ltd | 26.2144 MHz XO 1.8V 7.0X5.0MM OE |
| 250 | ||
| 25QHTF57-26.29675-PD | Mercury Electronic Ind Co Ltd | 26.29675 MHz XO 2.5V 7.0X5.0 PD |
| 250 | ||
| N3372-6203RB | 3M Interconnect | CONN HEADER VERT 60POS 2.54MM RoHS : Compliant |
| 77 | ||
| 667-262-Z1-T1204-6 | JRH ELECTRONICS | PROTECTIVE COVER |
| 60 | ||
| PF2472-620RF1 | Riedon | RES 620 OHM 1% 100W TO247 |
| 53 | ||
| CE.72621 | Elesa SPA | GW12, DIGITAL-ANALOGUE POSITION |
| 10 | ||
| PF2472-62RF1 | Riedon | RES 62 OHM 1% 100W TO247 |
| 8 | ||
![]() Avnet Americas | WSL27262L000FEB | Vishay Intertechnologies | - Tape and Reel (Alt: WSL27262L000FEB) RoHS : Compliant |
| 6,000 | |
| WSL27262L000FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSL27262L000FEA) RoHS : Compliant |
| 3,000 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | SMD Current Sense Resistor, 0.002 ohm, WSLP Series, 2726 [6966 Metric], 5 W, ? 1%, Metal Strip - Tape and Reel (Alt: WSLP27262L000FEA) RoHS : Compliant |
| 1,500 | ||
| 2007262-1 | TE Connectivity | Connector Accessories Cage Nickel Silver Tray - Bulk (Alt: 2007262-1) RoHS : Compliant |
| 37 | ||
| A17262-02 | Qnity Laird | Dispensable Gap Filler for Graphic chips/High Power Automotive Electronic Controls/Microprocessors/ - Bulk (Alt: A17262-02) RoHS : Compliant |
| 11 | ||
| 2M667-262-M-H1001-5 | Amphenol Corporation | 2M667-262-M-H1001-5 - Bulk (Alt: 2M667-262-M-H1001-5) RoHS : Not Compliant | 10 | |||
| 2M667-262-M-H1901-5 | Amphenol Corporation | Protection Cap with Stainless Steel Wire Rope 19 Shell Size Aluminum - Bulk (Alt: 2M667-262-M-H1901-5) RoHS : Not Compliant | 9 | |||
| 667-262-M-N-15-186F | Glenair Inc | Protective Cover, Series 805 Mighty Mouse Triple-Start - Bulk (Alt: 667-262-M-N-15-186F) RoHS : Not Compliant | 7 | |||
| 17E17262 | Amphenol Corporation | Connector Accessories Plated Plastic Backshell Acrylonitrile Butadiene-Styrene Nickel Over Copper D - Bulk (Alt: 84K7425) RoHS : Compliant |
| 0 | ||
| 667-262-NF-H1501-3 | Glenair Inc | Triple-Start Receptacle Protective Cover for Series 805 Mighty Mouse Connectors Shell Size 15 - Bulk (Alt: 667-262-NF-H1501-3) RoHS : Not Compliant |
| 0 | ||
| 667-262-M-N11 | Glenair Inc | - Bulk (Alt: 667-262-M-N11) RoHS : Compliant |
| 0 | ||
| N3372-6203RB | 3M Interconnect | - Bulk (Alt: 7100251600) RoHS : Compliant |
| 0 | ||
| 2M667-262-ZNU-G1502-5 | Amphenol Corporation | - Bulk (Alt: 2M667-262-ZNU-G1502-5) RoHS : Not Compliant |
| 0 | ||
| 2M667-262-ZNU-H1102-6 | Amphenol Corporation | - Bulk (Alt: 2M667-262-ZNU-H1102-6) RoHS : Not Compliant |
| 0 | ||
| 17E17262 | Amphenol Corporation | Connector Accessories Plated Plastic Backshell Acrylonitrile Butadiene-Styrene Nickel Over Copper D - Bag (Alt: 17E17262) RoHS : Compliant |
| 0 | ||
![]() Newark | 726291100 | Wurth Elektronik | DUST COVER, BLACK, MICRO USB CONNECTOR; RoHS : Compliant |
| 12,401 | |
| 5227726-2 | TE Connectivity | RF/COAXIAL, BNC JACK, STRAIGHT, 50 OHM, SOLDER; Connector Type:BNC Coaxial; Connector Body Style:Straight Bulkhead Jack; Coaxial Termination:Solder; Impedance:50ohm; Coaxial Cable Type:-; Contact Material:Phosphor Bronze RoHS Compliant: Yes RoHS : Compliant |
| 9,725 | ||
| 10-89-7262 | Molex | CONNECTOR, HEADER, 26POS, 2ROW, 2.54MM; RoHS : Compliant |
| 6,129 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | SMD Current Sense Resistors, AEC-Q200 WS; RoHS : Compliant |
| 5,577 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | SMD Current Sense Resistors, AEC-Q200 WS; RoHS : Compliant |
| 5,577 | ||
| 17E17262 | Amphenol Communications Solutions | D SUB BACKSHELL, SIZE DB, ABS POLYMER; Product Range:17E Series; D Sub Shell Size:DB; Cable Exit Angle:180°; Connector Body Material:Metallised Thermoplastic Body; Accessory Type:Plastic Backshell; Connector Shell Size:DB RoHS Compliant: Yes RoHS : Compliant |
| 5,485 | ||
| SBC2-4R7-262 | KEMET Corporation | INDUCTOR, 4.7UH, 20%, 2.6A, RADIAL; RoHS : Compliant |
| 2,480 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | CURR SENSE RES SMD, 0R002, 5W; RoHS : Compliant |
| 730 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | CURR SENSE RES SMD, 0R002, 5W; RoHS : Compliant |
| 730 | ||
| 09930007262 | HARTING Technology Group | HEAVY DUTY CONTACT, SOCKET, 4AWG, CRIMP; Product Range:Han S Series; Contact Gender:Socket; Wire Size AWG Max:4AWG; Contact Termination Type:Crimp; Current Rating:200A; Contact Material:Copper Alloy RoHS Compliant: Yes RoHS : Compliant |
| 200 | ||
| MP72621 | SPC Multicomp | SLIDER KNOB W/WHT INDICATOR LINE, BLACK; RoHS : Compliant |
| 103 | ||
| 625-037-262-011 | EDAC Inc | D SUB CONN, R/A PLUG, 37POS, DC, SOLDER; D Sub Connector Type:Standard; Gender:Plug; Product Range:625 Series; No. of Contacts:37Contacts; D Sub Shell Size:DC; Contact Termination Type:Solder; Contact Material:Copper Alloy RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 15726262701000 | HARTING Technology Group | CONN, HEADER, HYBRID 6P+26S, , THT; RoHS : Compliant |
| 49 | ||
| 686726200001 | Wurth Elektronik | CABLE, FFC, REV, 1MM, 200MM, 26WAY; RoHS : Compliant |
| 39 | ||
| M80-8672622 | Harwin | CONNECTOR, HEADER26POS, 2ROW, 2MM; RoHS : Compliant |
| 16 | ||
![]() Analog Devices Inc | MAX17262HEWL+T | Analog Devices Inc | 5µA 1-Cell Fuel Gauge with Mod RoHS : Compliant |
| 28,854 | |
| MAX17262REWL+T | Analog Devices Inc | 5.2µA 1-Cell Fuel Gauge with M RoHS : Compliant |
| 4,022 | ||
| MAX17262HEWL+ | Analog Devices Inc | 5µA 1-Cell Fuel Gauge with Mod RoHS : Compliant | 1,553 | |||
AD7262BCPZ-RL7![]() | Analog Devices Inc | Dual simultaneous 12 bit ADC w RoHS : Compliant |
| 750 | ||
| MAX17262XEVKIT# | Analog Devices Inc | MAX17262 EVKIT for WLP ModelGa |
| 45 | ||
AD7262BSTZ![]() | Analog Devices Inc | Dual simultaneous 12 bit ADC w RoHS : Compliant |
| 13 | ||
| EVAL-AD7262EDZ | Analog Devices Inc | EVALUATION CONTROL BOARD I.C. RoHS : Compliant |
| 9 | ||
AD7262BSTZ-5-RL7![]() | Analog Devices Inc | Dual simultaneous 12 bit ADC w RoHS : Compliant |
| 0 | ||
| MAX17262REWL+ | Analog Devices Inc | 5.2µA 1-Cell Fuel Gauge with M RoHS : Compliant | 0 | |||
AD7262BSTZ-5![]() | Analog Devices Inc | Dual simultaneous 12 bit ADC w RoHS : Compliant |
| 0 | ||
![]() RS | 726291100 | Wurth Elektronik | USB CAP, MICRO USB, BLACK, TPE MATERIAL, -40 TO 80C, WA-PCCA SERIES RoHS : Compliant |
| 895 | |
| 09930007262 | HARTING Technology Group | HAN S CRIMP CONTACT, FEMALE, ANGLED, 25MM (4AWG) RoHS : Compliant |
| 99 | ||
| 7262B | Electroswitch Electronic Products | SWITCH, TOGGLE, FULL SIZE POWER, SPDT, (ON)-OFF-(ON), SCREW, 20A, 3/4 HP |
| 28 | ||
| 10-037262-016 | Amphenol Industrial Operations | CONNECTOR, AC INSERT, SZ 16 |
| 21 | ||
| 837262 | RS Pro | M3 STEEL SQUARE NUTS BRIGHT ZINC PLATED FINISH |
| 8 | ||
| FIBERLERT-125 (5317262) | Fluke Calibration | TESTERS, DETECTOR, DETECTS OPTICAL POWER IN SM AND MM FIBER, FIBERLERT SERIES |
| 7 | ||
| 2867262 | RS Pro | 3A 115/250VAC SINGLE PHASE CHASIS MOUNT |
| 5 | ||
| 2456726 (25533785) (EBI203102000-050RS) | RS Pro | 5/16-18 X 2 IN ELEVATOR BOLT, GRADE 2, ZINC PLATED, COARSE |
| 5 | ||
| 2451726 (25531163) (MPFI02504000-050RS) | RS Pro | SCREW, 1/4-20 X 4 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 8726292 | RS Pro | SOLDER SLEEVE SIZE 4 |
| 2 | ||
| FLUKE-707 (1617262) | Fluke Calibration | CALIBRATOR LOOP 0 TO 28 VDC 0 TO 24 MA 152 MM CSA CERTIFIED |
| 2 | ||
| 2377262 | RS Pro | INDUCTIVE BARREL-STYLE PROXIMITY SENSOR, M30, 22MM DETECTION, NPN/PNP OUTPUT |
| 1 | ||
| 8726255 | RS Pro | HEATSHRINK SLEEVE 6.4MM YELLOW 250 PACK |
| 1 | ||
| PCBC-A-100 (197262) | Festo | SOLDERING BASE, FOR MHA1-P, MHP1-P..PI BLOCKS, 100 PCS |
| 1 | ||
| 7262 | Keystone Electronics Corp | JACK SCREW WITH NYLON PATCH (STAINLESS) |
| 0 | ||
![]() Microchip Technology Inc | MCP1726-2502E/SN![]() | Microchip Technology Inc | 1A Low Voltage Low lq LDO, SOIC, Projected EOL: 2036-02-22 RoHS : Compliant |
| 19,290 | |
MCP1726-2502E/MF![]() | Microchip Technology Inc | 1A Low Voltage Low lq LDO, DFN, Projected EOL: 2036-02-22 RoHS : Compliant |
| 179 | ||
![]() Bisco Industries | MS35207-262 | Crescent Manufacturing | 2,669 | |||
| 7262 | Keystone Electronics Corp | 2,265 | ||||
| 726-240207-001 | Heyco | 499 | ||||
| 5606-72-62 | Seastrom Mfg | 200 | ||||
| 5602-72-62 | Seastrom Mfg | 86 | ||||
| 2800-7262-600 | RAF Electronic Hardware | 52 | ||||
| CA726/2 | Altech Corporation | 40 | ||||
| 5612-72-62 | Seastrom Mfg | 9 | ||||
| 667-262-MT-H816-3 | Glenair Inc | RoHS : Compliant | 7 | |||
| MS90726-202 | MS HEX CAP SCREWS | 6 | ||||
| 914726-2 | MISCELLANEOUS | 2 | ||||
| MS90726-29 | BGM Fastner | 2 | ||||
| MS90726-236 | MS Screws | 1 | ||||
| 667-262-NF-N11 | Glenair Inc | RoHS : Not Compliant | 1 | |||
![]() Rochester Electronics | STK672-622B-E | onsemi | Motion Control Electronic, Hybrid, PZIP19 RoHS : Compliant |
| 4,640 | |
| TLE7262EXUMA2 | Infineon Technologies AG | TLE7262EXUMA2 - Integrated HS-Switch System RoHS : Compliant |
| 104,000 | ||
AD7262BCPZ![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access RoHS : Compliant |
| 5,811 | ||
AD7262BSTZ![]() | Analog Devices Inc | IC DAC 8 CONV 16Bits String DAC 2-Wire Serial, I²C 16-QFN T/R RoHS : Compliant |
| 604 | ||
AD7262BCPZ-5-RL7![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access RoHS : Compliant |
| 750 | ||
AD7262BCPZ-5![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access RoHS : Compliant |
| 7,856 | ||
AD7262BSTZ-5![]() | Analog Devices Inc | IC ADC 2 CONV 12Bits SAR DSP, MICROWIRE, QSPI, SPI 48-QFP Tray RoHS : Compliant |
| 2,187 | ||
TPS72625KTTT![]() | Texas Instruments | TPS726 Low Input Voltage, 1-A Low-Dropout Linear Regulator with Supervisor RoHS : Compliant |
| 15,555 | ||
TPS72625KTTR![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.28V Dropout, CMOS, PSSO5 RoHS : Compliant |
| 8,995 | ||
TPS72625DCQ![]() | Texas Instruments | TPS726 Low Input Voltage, 1-A Low-Dropout Linear Regulator with Supervisor RoHS : Compliant |
| 9,732 | ||
R5S72620P144FP#UZ![]() | Renesas Electronics Corporation | SH7262 - 32-bit Microcontrollers RoHS : Compliant |
| 130 | ||
R5S72621W144FP#U0![]() | Renesas Electronics Corporation | SH7262 - 32-bit Microcontrollers RoHS : Compliant |
| 1,357 | ||
| R5S72624W144FP#U0 | Renesas Electronics Corporation | SH7262 - 32-bit Microcontrollers RoHS : Compliant |
| 547 | ||
R5S72627P144FP#UZ![]() | Renesas Electronics Corporation | Microcontroller SuperH RISC / SH7256 Series / SH72562, 7264 RoHS : Compliant |
| 396 | ||
| STK672-622B-E | SANYO Semiconductor Co Ltd | Motion Control Electronic, Hybrid, PZIP19 RoHS : Compliant |
| 2 | ||
![]() Sager | 7262 | Keystone Electronics Corp | Screws & Fasteners JACK SCREW WITH NYL PATCH STAINLESS |
| 0 | |
| C726-21/2B | ABB Group | Cable Mounting & Accessories | 0 | |||
| EF7262-000 | TE Connectivity | Multi-Conductor Cables 44A1131-22-0/2/9-9CS3068 | 0 | |||
| P1-72621W | OTTO Engineering Inc | PRECISION SNAP-ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 803-93-072-62-001000 | Mill-Max Mfg Corp | Headers & Wire Housings 72P COMPLIANT TAIL SKT DOUBLE ROW RoHS : Not Compliant |
| 0 | ||
| M8805/110-7262 | OTTO Engineering Inc | SUBMINIATURE MOMENTARY ACTION PUSHBUTTON SWITCH |
| 0 | ||
| 227726-2 | TE Connectivity | RF Connectors / Coaxial Connectors BULKHEAD SOLDER JACK RoHS : Not Compliant | 0 | |||
| 2266726-2 | TE Connectivity | Bench Top Tools OC-AT-S-FA-055F070O-001-0281 | 0 | |||
| 55PC0726-20-2/6CS2502 | TE Connectivity | TE Connectivity 55PC0726-20-2/6CS2502 | 0 | |||
| MA1-S-72-620-1-A26-B-E | Carling Technologies | Circuit Breakers MA1S726201A26BE RoHS : Compliant |
| 0 | ||
| 2072620193 | Molex | Standard Card Edge Connectors Assy OCP 4C 1.93mm BD StraddleMnt 140Ckt RoHS : Compliant | 0 | |||
| 5-87262-2 | TE Connectivity | Headers & Wire Housings 02 MODI HDR SRST .156CL ROHS RoHS : Compliant | 0 | |||
| 726215-000 | TE Connectivity | Multi-Conductor Cables 55A483624MST39CS2275 RoHS : Compliant |
| 0 | ||
| 726297-000 | TE Connectivity | Hook-up Wire 55A6315-20-9-9CS2632 | 0 | |||
| AP105-DF57-2628S(65) | Hirose Electric Co Ltd | Crimpers / Crimping Tools | 0 | |||
![]() TME | 10-89-7262 | Molex | Connector: pin strips; pin header; male; PIN: 26; THT; Inom: 3A; 250V RoHS : Compliant |
| 23,550 | |
| 2118726-2 | TE Connectivity | Mat EMI/EMC: shielding RoHS : Compliant |
| 7,200 | ||
| 1897726-2 | TE Connectivity | Connector: automotive; plug; female; 10A; PIN: 10; straight; crimped RoHS : Compliant |
| 2,100 | ||
| 1587262-4 | TE Connectivity | 1587262-4 |
| 72 | ||
| 15726262601333 | HARTING Technology Group | Connector: PCB to PCB; socket; male; PIN: 32(6+26); straight; SMT RoHS : Compliant |
| 5 | ||
| 15726262701333 | HARTING Technology Group | Connector: PCB to PCB; socket; male; PIN: 32(6+26); straight RoHS : Compliant |
| 5 | ||
| 7262 | Keystone Electronics Corp | Screwed spacer sleeve; 4.8mm; Int.thread: UNC4-40; hexagonal |
| 0 | ||
| 7262 | MBS AG | Transformer: current; ASK 31.3; I AC: 400A; 10VA; 75.5x61x48mm |
| 0 | ||
| 10057262 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 26; THT; 3A; 250V; SL 6 |
| 0 | ||
| 1472623 | Bossard Group | Screw; 4.2x9.5; Head: hexagonal; none; 7mm; hardened steel; zinc |
| 0 | ||
| 1847262 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 1772621 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 5227726-2 | TE Connectivity | Connector: BNC; socket; female; insulated; straight; 50Ω; soldering RoHS : Compliant |
| 0 | ||
| 10117262 | Essentra Components | Washer; round; h=2.8mm; D=8.5mm; polyamide; natural |
| 0 | ||
| 17262201102 | HARTING Technology Group | Connector: DIN 41612; socket; female; PIN: 220; angled; THT; 1A RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BU7262SFVM-TR![]() | ROHM Semiconductor | High Speed Input-Output Full Swing Operational Amplifier RoHS : Compliant |
| 300 | |
BU7262SF-E2![]() | ROHM Semiconductor | High Speed Input-Output Full Swing Operational Amplifier RoHS : Compliant |
| 250 | ||
BU7262FVM-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU7262NUX-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU7262F-E2![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
BU7262SNUX-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
![]() ComSIT USA | TPS72625DCQR![]() | Texas Instruments | LOW INPUT VOLTAGE, 1-AMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.28V Dropout, CMOS, PDSO6 RoHS : Compliant | 865 | ||
| R5S72621W144FPU | Renesas Electronics Corporation | 32-BIT RISC MICROCOMPUTER RISC Microcontroller, 32-Bit, 144MHz, CMOS, PQFP176 RoHS : Compliant | 116 | |||
| TDA7262 | STMicroelectronics | 20+20 W STEREO AMPLIFIER WITH STAND-BY Audio Amplifier, 28W, 2 Channel(s), 2 Func, Bipolar, PZFM11 RoHS : Not Compliant | 100 | |||
| 1726202 | Phoenix Contact | PCB TERMINAL BLOCK Modular Terminal Block, 13.5A, 1.5mm2, 2 Deck(s) RoHS : Compliant | 50 | |||
| EXC7262UAG | Egalax Empia Technology Inc | Electronic Component RoHS : Not Compliant | 10 | |||
![]() Interstate Connecting Components | 7262 | Keystone Electronics Corp | JACK SCREW WITH NYLON PATCH (STAINLESS) |
| 16 | |
| M83726/29-3002P | TE Connectivity | TD229-3002P=TDFR 30 SEC M83726 7-1617805-1 RoHS : Not Compliant |
| 2 | ||
| 667-262-M-N11 | Glenair Inc | PROTECTIVE COVER RoHS : Compliant |
| 0 | ||
| 667-262-M-N15-186F | Glenair Inc | PROTECTIVE COVER | 0 | |||
| 667-262-NF-H1501-3 | Glenair Inc | PROTECTIVE COVER |
| 0 | ||
| 667-262-NF-S1501-4 | Glenair Inc | RECEPTACLE COVER FOR 805 MM | 0 | |||
| 667-262-NF-SK12-3 | Glenair Inc | MM SZ12 RECPT CVR SLIPKNOT CAD | 0 | |||
| 667-262-Z1-T1204-6 | Glenair Inc | PROTECTIVE COVER RoHS : Compliant | 0 | |||
| 1-1897726-2 | TE Connectivity | MT-2/3 SLD 10P PLUG ASS Y RoHS : Compliant | 0 | |||
| 17E17262 | Amphenol Commercial | ACC D SUB BACKSHELL SIZE B METAL PLATED ABS |
| 0 | ||
| 10-072628-11P | Amphenol Industrial Operations | 10-072628-11P PLUG | 0 | |||
| 2266726-2 | TE Connectivity | OC-AT-S-FA-055F070O-001-0281 |
| 0 | ||
| 10-072624-21I | Amphenol Industrial Operations | PLUG | 0 | |||
| 10-072628-18S | Amphenol Industrial Operations | PLUG | 0 | |||
| 667-262-M-H1822-5 | Glenair Inc | MM TRIPLE START PROTECTIVE COVER RoHS : Compliant | 0 | |||
![]() PEI Genesis | 17E17262 | Amphenol Corporation |
| 0 | ||
| 10-072628-18S | Amphenol Corporation |
| 0 | |||
| J1726-25134S-2 | SOURIAU-SUNBANK |
| 0 | |||
| 10-072620-04S | Amphenol Corporation |
| 0 | |||
| 10-072624-21P | Amphenol Corporation |
| 0 | |||
| 211726-2005 | Filconn |
| 0 | |||
| C10-037262-32Y | Amphenol Corporation |
| 0 | |||
| 11472626-1 | SOURIAU-SUNBANK |
| 0 | |||
| 970-0007-262 | ITT Interconnect Solutions |
| 0 | |||
| J1726-25134S-1 | SOURIAU-SUNBANK |
| 0 | |||
| S3605-7262N | SOURIAU-SUNBANK |
| 0 | |||
| S1772-62T | SOURIAU-SUNBANK |
| 0 | |||
| 12476726-2 | SOURIAU-SUNBANK |
| 0 | |||
| 17-1726-2 | Amphenol RF |
| 0 | |||
| S4726-2-12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 227726-2 | TE Connectivity | Connectors RoHS : Not Compliant |
| 4,091 | |
| 17E17262 | Amphenol Corporation | Connector |
| 2,147 | ||
| 1897726-2 | TE Connectivity | Connectors RoHS : Compliant |
| 1,459 | ||
| 1-1587262-0 | TE Connectivity | TE COMPONENT (REF 1-1587262-0) |
| 523 | ||
| 1557262-2 | TE Connectivity | Connectors |
| 165 | ||
| 472621-000 | TE Connectivity | CABLE-PROT PART (TE REF 472621-000) |
| 97 | ||
| 10-037262-32X | Amphenol Corporation | Connector |
| 44 | ||
| 1996726-2 | TE Connectivity | Connectors RoHS : Compliant |
| 8 | ||
| 667-262-M-S814-3 | Glenair Inc | COVER |
| 4 | ||
| 667-262-M-S1018-6 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 2 | ||
| 667-262-M-S918-6 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 2 | ||
| 667-262-M-S1520-6 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 2 | ||
| 72-627456-16S | Amphenol Corporation | CONNECTOR |
| 2 | ||
| 2M667-262-ZNU-G801-4 | Amphenol Corporation | 2M 805 Dust Cap RECP sz 08 |
| 1 | ||
| 667-262-NF-H918-4 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 1 | ||
![]() Richardson RFPD | 227726-2 | TE Connectivity | Conn BNC 0Hz to 4GHz 50Ohm Solder Cup ST Panel Mou RoHS : Compliant | 0 | ||
| SI5335A-B07262-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335A-B07262-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| 85072620 | HUBER+SUHNER | EMP/LIGHTNING PROTEC RoHS : Compliant | 0 | |||
| 72-6-22 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 85072628 | HUBER+SUHNER | EMP/LIGHTNING PROTEC RoHS : Compliant | 0 | |||
| R577262015 | Radiall | RF Switch 0MHz to 3GHz 75dB RoHS : Not Compliant |
| 0 | ||
AD7262BCPZ-RL7![]() | Analog Devices Inc | 2-Channel Dual ADC SAR 1Msps 12-bit Serial 48-Pin RoHS : Compliant |
| 0 | ||
AD7262BSTZ![]() | Analog Devices Inc | 2-Channel Dual ADC SAR 1Msps 12-bit Serial 48-Pin RoHS : Compliant |
| 0 | ||
AD7262BSTZ-5![]() | Analog Devices Inc | 2-Channel Dual ADC SAR 500ksps 12-bit Serial 48-Pi RoHS : Compliant |
| 0 | ||
AD7262BSTZ-5-RL7![]() | Analog Devices Inc | 2-Channel Dual ADC SAR 500ksps 12-bit Serial 48-Pi RoHS : Compliant |
| 0 | ||
| EVAL-AD7262EDZ | Analog Devices Inc | AD7262 ADC Evaluation Board 1MSPS RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 2118726-2 | TE Connectivity | INSTOCK RoHS : Compliant | 21,344 | ||
| STK672-622A-E | onsemi | INSTOCK RoHS : Compliant | 20,852 | |||
| 17E17262 | Amphenol Corporation | INSTOCK | 12,097 | |||
| 227726-2 | TE Connectivity | INSTOCK RoHS : Not Compliant | 8,187 | |||
| 23124472620 | Kostal GmbH & Co KG | INSTOCK | 6,630 | |||
| 2007262-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,406 | |||
| 172624-3 | TE Connectivity | INSTOCK RoHS : Compliant | 1,353 | |||
| 1957726-245-1 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 227726-2 | TE Connectivity | Conn BNC RCP 50Ohm Solder Cup ST Panel Mount Silver (Alt: 227726-2) RoHS : Compliant | 0 | ||
| 24572625 | nVent Schroff | (Alt: 24572625) RoHS : Compliant | 0 | |||
| 10897262 | Molex | (Alt: 10897262) RoHS : Compliant | 0 | |||
| 1217262-1 | TE Connectivity | (Alt: 1217262-1) RoHS : Compliant | 0 | |||
| 1217262-1 | TE Connectivity | (Alt: 1217262-1) RoHS : Compliant | 0 | |||
| 1897726-2 | TE Connectivity | (Alt: 1897726-2) RoHS : Compliant | 0 | |||
| 1726290000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1726290000) RoHS : Compliant | 0 | |||
| 472621-000 | TE Connectivity | Single Conductor Cable 1Conductors 20AWG 218mm White 600VAC (Alt: 472621-000) RoHS : Compliant | 0 | |||
| AXK726247G | Panasonic Electronic Components | Conn Board to Board SKT 26 POS 04mm Solder ST SMD Embossed TR - Tape and Reel (Alt: AXK726247G) RoHS : Compliant | 0 | |||
| FN372-6-22 | TE Connectivity | (Alt: 800120-SF) RoHS : Compliant | 0 | |||
| M80-8672622 | Harwin | Datamate LTek DIL Male Vertical 3mm PC Tail Connector latched selective gold tinlead (Alt: M80-8672622) RoHS : Not Compliant | 0 | |||
| N3372-6202RB | 3M | (Alt: 7100251564) RoHS : Compliant | 0 | |||
| 0072.6261.B1 | Schurter Electronic Components | SRT00726261B1 (Alt: 0072.6261.B1) RoHS : Compliant | 0 | |||
| MAL219726271E3 | Vishay Intertechnologies | Cap Aluminum 270uF 400V 20 30 X 35mm 10mm 092 Ohm 1380mA 3000 hr 85C Bulk (Alt: MAL219726271E3) RoHS : Compliant | 0 | |||
| DF57-2628SCFA(41) | Hirose Electric Co Ltd | (Alt: CL0666-0033-0-41) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0334726235 | Molex | (Alt: 0334726235) RoHS : Compliant | 0 | ||
| WSLP27262L000FEA | Vishay Intertechnologies | SMD Current Sense Resistor, 0.002 ohm, WSLP Series, 2726 [6966 Metric], 5 W, ? 1%, Metal Strip (Alt: WSLP27262L000FEA) RoHS : Compliant | 0 | |||
| 453564726251 | Taoglas Antenna Solutions | (Alt: 453564726251) RoHS : Compliant | 0 | |||
| 17E-1726-2 | Amphenol Corporation | Connector Accessories Plated Plastic Backshell Acrylonitrile Butadiene-Styrene Nickel Over Copper D (Alt: 17E-1726-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BU7262F-E2![]() | ROHM Semiconductor | (Alt: BU7262F-E2) RoHS : Compliant | 0 | ||
| JANSR2N7262U | Microchip Technology Inc | (Alt: JANSR2N7262U) RoHS : Not Compliant | 0 | |||
MCP1726-2502E/SN![]() | Microchip Technology Inc | LDO Regulator Pos 25V 1A 8Pin SOIC N Tube (Alt: MCP1726-2502E/SN) RoHS : Compliant | 0 | |||
MCP1726-2502E/MF![]() | Microchip Technology Inc | LDO Regulator Pos 25V 1A 8Pin DFN EP Tube (Alt: MCP1726-2502E/MF) RoHS : Compliant | 0 | |||
![]() DB Roberts | D8-316-726-200 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | ||
| 467262 | Essentra Components | 0 | ||||
| 09418-72621 | Avdel | M6 LF EUROSERT CR3 COMPLI ANT | 0 | |||
| 0GK08-72622 | Avdel | SQUARESERT INS M6 LF ST | 0 | |||
| 09408-72621 | Avdel | EUROSERTTM INS M6 LF ST | 0 | |||
| SPL57262D | Spiralock | M8X1.25 SPL 3StFl T10 B TiN Standard New Taps | 0 | |||
| 20572624 | Essentra Components | 37.5 MM TUBE END PLUGLDPE NATU | 0 | |||
| SPL17262A | Spiralock | 1/4-20 SPL 3 T10 B TiN Standard New Taps | 0 | |||
| 09408-72623 | Avdel | EUROSERT INS M6 LF ST NO LUB | 0 | |||
![]() EBV Elektronik | LCS7262C-TL | Power Integrations | (Alt: LCS7262C-TL) RoHS : Compliant | 0 | ||
| AS7262-BLGT | ams OSRAM Group | Light to Digital Ambient Light Sensor Digital 20Pin LGA TR (Alt: Q65114A0845) RoHS : Compliant | 0 | |||
| NJU77262R-TE1 | Nisshinbo Micro Devices | NJU77262RTE1 (Alt: NJU77262R-TE1) RoHS : Compliant | 0 | |||
| NJU77262KU1-TE4 | Nisshinbo Micro Devices | NJU77262KU1TE4 (Alt: NJU77262KU1-TE4) RoHS : Compliant | 0 | |||
MCP1726-2502E/SN![]() | Microchip Technology Inc | LDO Regulator Pos 25V 1A 8Pin SOIC N Tube (Alt: MCP1726-2502E/SN) RoHS : Compliant | 0 | |||
MCP1726-2502E/MF![]() | Microchip Technology Inc | LDO Regulator Pos 25V 1A 8Pin DFN EP Tube (Alt: MCP1726-2502E/MF) RoHS : Compliant | 0 | |||
![]() Maritex | DF57-2628SCF(41) | Hirose Electric Co Ltd | Rectangular Connector Contacts; DF57-2628SCF(41); HIROSE ELECTRIC; Tin; 26 AWG; Crimp; 28 AWG RoHS : Compliant |
| 27,086 | |
![]() Master Electronics | 227726-2 | TE Connectivity | SOLDER JACK ISOLATED 50 OHM BNC RoHS : Compliant |
| 7,572 | |
| 17E17262 | Amphenol Communications Solutions | Two Piece Backshell 180A° B Shell Size Nickel Over Copper Acrylonitrile Butadiene Styrene RoHS : Compliant |
| 4,339 | ||
| 10-754726-2101 | Amphenol Commercial | SurLok Plus® 8.0mm RADSOK power connector receptacle with screw and busbar termination options for high-voltage industrial applications. RoHS : Compliant |
| 100 | ||
| M83726/29-3002P | TE Connectivity | Time Delay Relay RoHS : Compliant |
| 4 | ||
| 72626-C-50 | Molex | RoHS : Compliant |
| 2 | ||
| 1617262 | Fluke Calibration | Access Loop Calibrator RoHS : Compliant |
| 1 | ||
| FW-02-03-FM-D-127-262 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-117-262 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| N3372-6203RB | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-097-262 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 155726-2808 | ITT Interconnect Solutions | Connector Circular Housing Socket 2 Position 13 Shell Size Zinc Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| PF2472-62RF1 | Bourns Inc | PF2472 62 OHM 1% RoHS : Compliant |
| 0 | ||
| 155726-2809 | ITT Interconnect Solutions | Connector Circular Housing PIN 2 Position 13 Shell Size Zinc Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| 2266726-2 | TE Connectivity | OC-AT-S-FA-055F070O-001-0281 RoHS : Not Compliant |
| 0 | ||
| PF2472-620RF1 | Bourns Inc | PF2472 620 OHM 1% RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C7262/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7262/WP can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C7262/WP RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7262/WP is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7262/WP can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 1,392 | ||
| PE3C7262/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7262/WP-60 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C7262/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7262/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7262/WP-60 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 348 | ||
| PE3C7262/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable 24 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable 24 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7262/WP-24 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C7262/WP-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7262/WP-24 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7262/WP-24 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 348 | ||
| PE3C7262/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7262/WP-36 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C7262/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7262/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7262/WP-36 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 348 | ||
| PE3C7262/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7262/WP-50CM can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C7262/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C7262/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7262/WP-50CM can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 348 | ||
| PE3C9726-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Male to 1.85mm Female VITA 67 Cable 24 Inch Length Using PE-P047HF Coax with HeatShrink., Radio frequency assembly mini SMP male to 1.85mm female VITA 67 cable 24 inch length using PE-P047HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP male to 1.85mm female VITA 67 cable 24 inch length using PE-P047HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and 1.85mm cable connection on the other. Our vita 67 mini SMP to 1.85mm cable assemblies have a male gender on end 1 and female on end 2. PE3C9726-24 can also be known as a vita 67 mini SMP plug to 1.85mm jack cable assembly and will be shipped same-day as it is purchased. Mini SMP plug to 1.85mm jack cable assembly PE3C9726-24 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP male to 1.85mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9726-24 can also be used in the other direction and will be 1.85mm female to mini SMP male cable assembly if the opposite connectivity is required. Vita 67 mini SMP plug to 1.85mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP male to 1.85mm female VITA 67 cable 24 inch length using PE-P047HF coax with heatshrink. |
| 2 | ||
| PE3W07262 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using PE-P195 Coax. PE3W07262 is a SMA male to TNC male cable using PE-P195 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07262 SMA male to TNC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3C6726-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly BNC male to N male low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to N male low loss cable 24 inch length using LMR-400 coax with Times Microwave components, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type N cable connection on the other. Our low loss BNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C6726-24 can also be known as a low loss BNC plug to N type plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C6726-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6726-24 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to N type cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male low loss cable 24 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3W07262/TN/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using PE-P195 Coax with HeatShrink, LF Solder., Pasternack’s PE3W07262/TN/HS SMA male to TNC male RF cable assembly using PE-P195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W07262/TN/HS can also be known as a SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07262/TN/HS RF cable has an FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This PE3W07262/TN/HS SMA plug to TNC plug cable assembly is built with PE-P195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W07262/TN/HS can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. This SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3726-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Right Angle Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly N male to N male right angle cable 24 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and right angle N type cable connection on the other. Our type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3726-24, can also be known as a type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3726-24 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3726-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 24 inch length using RG142 coax. |
| 0 | ||
| PE3C7262 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using SPO-250 Coax. PE3C7262 is a N male right angle to N male cable using SPO-250 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3C7262 N male right angle to N male cable assembly is constructed with SPO-250 coax. | 0 | |||
| PE3W17262 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Plug to FAKRA Jack Right Angle Cable Using LMR-100A-UF Coax. PE3W17262 is a FAKRA plug to FAKRA jack right angle cable using LMR-100A-UF coax. This Pasternack FAKRA plug to FAKRA jack right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. FAKRA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug FAKRA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17262 FAKRA plug to FAKRA jack right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03726-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug to BNC Male Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly MCX plug to BNC male cable 24 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to BNC male cable 24 inch length using RG174 coax, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and BNC cable connection on the other. Our MCX to BNC cable assemblies have a plug gender on end 1 and male on end 2. PE3W03726-24 can also be known as a MCX male to BNC plug cable assembly and will be shipped same-day as it is purchased. MCX male to BNC plug cable assembly PE3W03726-24 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03726-24 can also be used in the other direction and will be BNC male to MCX plug cable assembly if the opposite connectivity is required. MCX male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to BNC male cable 24 inch length using RG174 coax. |
| 0 | ||
![]() TE Connectivity | 2118726-2 | TE Connectivity | STD SHIELD FRAME, CRS-44.37X44.37X9.75MM Frame Material: Cold Rolled Steel Shielding Type: Two-Piece Cold Rolled Steel Two-Piece | Board Level Shielding (Bls) | Part Number: 2118726-2 | Internal Number: 2118726-2 | TE Connectivity RoHS : Compliant |
| 5,587 | |
| 5172625-3 | TE Connectivity | DRAWER CONN. FEMALE ASSY 24P Number of Positions: 24 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 24 Receptacle Housing With | Part Number: 5172625-3 | Internal Number: 5172625-3 | TE Connectivity RoHS : Compliant |
| 330 | ||
| 2007262-1 | TE Connectivity | SFP+ 1x2 Cage Assembly, Light Pluggable Form Factor: SFP+ Pluggable I/O Product Type: Cage Assembly Sealable: No Circuit Application: Signal Operating Temperature Range: -55 – 105 °C SFP+ Cage Assembly | High Speed I/o | Part Number: 2007262-1 | Internal Number: 2007262-1 | TE Connectivity RoHS : Compliant |
| 185 | ||
![]() Vyrian | N3372-6202RB | 3m Electronic Products Division | Board Connector, 60 Contact(s), 2 Row(s), Male, Straight, Solder Terminal | 18,618 | ||
| EVAL-AD7262EDZ | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 11,525 | |||
LM27262LQ![]() | Texas Instruments | Switching Controller, Voltage-mode, 345kHz Switching Freq-Max | 9,352 | |||
| MAX17262REWL+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, PBGA9 RoHS : Compliant | 7,880 | |||
| MAX17262XEVKIT | Analog Devices (Maxim Integrated) | 6,859 | ||||
| MAX17262HEWL+T | Analog Devices (Maxim Integrated) | 6,810 | ||||
AD7262BSTZ![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access, PQFP48 RoHS : Compliant | 6,759 | |||
| MAX17262REWL-T | Analog Devices (Maxim Integrated) | 6,463 | ||||
AD7262BCPZ![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access RoHS : Compliant | 6,428 | |||
| 2726243 | Phoenix Contact | Modular Terminal Block, 2A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,249 | |||
AD7262BSTZ-5-RL7![]() | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 2 Func, 2 Channel, Serial Access, PQFP48 RoHS : Compliant | 5,077 | |||
TPS72625DCQRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.28V Dropout, CMOS, PDSO6 RoHS : Compliant | 4,850 | |||
| LM27262MTDX | Texas Instruments | Switching Controller, Voltage-mode, 345kHz Switching Freq-Max, PDSO48 | 3,778 | |||
| M83726/28-5000S | Leach International Corporation | On-Delay Relay, 2 Form C, DPDT-CO, 28VDC (Coil), DC Input, Panel Mount | 453 | |||
| M83726/29-1002P | Leach International Corporation | Off-Delay Relay, 2 Form C, DPDT-CO, 28VDC (Coil), DC Input, Panel Mount | 223 | |||
![]() Win Source Electronics | APW7262HAI-TRG | Anpec Electronics Corporation | 3MHz Synchronous Switch-Mode Battery Charger |
| 361,685 | |
AON7262E![]() | Alpha & Omega Semiconductor | MOSFET N-CH 60V 34A 8DFN / ESD protected RoHS : Compliant |
| 260,000 | ||
| MAX17262REWL+ | Maxim Integrated Products | IC BATT LIFEPO4/LI-ION 1C 9WLP RoHS : Compliant |
| 2,500 | ||
| MAX17262REWL+T | Maxim Integrated Products | IC BATT LIFEPO4/LI-ION 1C 9WLP / Battery Fuel Gauge IC LiFePO4/Li-ion 9-WLP (1.47x1.45) RoHS : Compliant |
| 2,390 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |