| Motore di ricerca datesheet componenti elettronici |
|
831L-AF5-R Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() ComSIT USA | Q65110A8311 | OSRAM OPTO SEMICONDUCTORS | AVAILABLE EU | 60,750 | ||
| 9140083101 | HARTING Technology Group | AVAILABLE EU | 1,027 | |||
| 878315141 | MOLEX INC | AVAILABLE EU | 4,428 | |||
| WR04X3831FTL | AVAILABLE EU | 7,080 | ||||
| AD8312ACBZP7 | Analog Devices Inc | AVAILABLE EU | 1,076 | |||
| 61083122602LF | FCI FRAMATOME | AVAILABLE EU | 974 | |||
| BZX884B18315 | Nexperia | AVAILABLE EU | 5,063 | |||
| 61083164600LF | FCI / FRAMATOME CONNECTORS INC | AVAILABLE EU | 289 | |||
![]() NexGen Digital | 742083182J | CTS Corporation | 10,924 | |||
| RR1632P3831B-T5 | Cal-Chip Electronics | 9,178 | ||||
| CRA06S0831K00JTA | Vishay Huntington | 4,867 | ||||
| RN12B3831CT | Cal-Chip Electronics | RoHS : Compliant | 4,589 | |||
| ERA-2AEB3831X | Panasonic Electronic Components | 2,500 | ||||
| 794783-1 | TE Connectivity | RoHS : Compliant | 2,118 | |||
| MS75083-1 | Vishay Huntington | 931 | ||||
AD8318ACPZ![]() | Analog Devices Inc | RoHS : Compliant | 558 | |||
| 641831-1 | TE Connectivity | RoHS : Compliant | 490 | |||
AD8315ARM![]() | Analog Devices Inc | RoHS : Not Compliant | 125 | |||
AD8313ARMZ![]() | Analog Devices Inc | RoHS : Compliant | 114 | |||
| RL-1283-1000 | Renco Electronics Inc | RoHS : Compliant | 75 | |||
| 561-8318 | 50 | |||||
| 1-178313-2 | TE Connectivity | RoHS : Compliant | 23 | |||
| 831752AGILF | Integrated Device Technology Inc | RoHS : Compliant | 20 | |||
![]() PEI Genesis | 97-283-12 | Amphenol Corporation |
| 0 | ||
| 85337KS1831SNL | SOURIAU-SUNBANK |
| 0 | |||
| 98314.1 | CONTA-CLIP Inc |
| 0 | |||
| AE83371W18319 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83374G1831N | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83378R1831Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83382G18317 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83382W1831Y | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83383W18318 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83385K18318 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83392R18319 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83395W18319 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| S2831F1816-R | SOURIAU-SUNBANK |
| 0 | |||
| S2831FM6506-2 | SOURIAU-SUNBANK |
| 0 | |||
| J486-83-1.25A | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 1-178315-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,694 | |
| 8-31818-1 | TE Connectivity | Terminals RoHS : Compliant |
| 804 | ||
| RJE36188310CH | Amphenol Corporation | Modular / Ethernet Connector |
| 330 | ||
| 8-31895-1 | TE Connectivity | Terminals RoHS : Compliant |
| 198 | ||
| 1-2198318-7 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 119 | ||
| M83723/96W1831N | Conesys | SELF LOCKING PLUG, PIN, 83723 SIII THREA |
| 87 | ||
| 88-565831-98S | Amphenol Corporation | RECEPT |
| 27 | ||
| RCHV1902831BK1 | Hammond Manufacturing | VENTED RACK CASE 28 X 31 RoHS : Compliant |
| 24 | ||
| M24308/3-1F | Amphenol PCD | Mil-Spec D-Sub Connector |
| 24 | ||
| M85049/83-12Z03 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 24 | ||
| 983-15SE7-10-06S6 | TE Connectivity | DEUTSCH CONNECTOR 983-15SE7-10-06S6 RoHS : Compliant |
| 2 | ||
| 4-538310-8 | TE Connectivity | Connectors |
| 2 | ||
| M85049/83-14P03 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 2 | ||
| ZPF000000000001831 | TE Connectivity | CONNECTOR (TE INTERNAL REF, MFR PN N/A) |
| 1 | ||
| M83723/72W1831N | Conesys | M83723 31C 31#20 PIN RECP |
| 1 | ||
![]() PUI | 12.84831 | 12,020 | ||||
| 2012-1X10G00S-2.8-3-10.9B | 2,000 | |||||
| 2011-1X13TR-5.8-3.1-1.4B | 600 | |||||
| AZ983-1A-24D | American ZETTLER Inc | RoHS : Compliant | 300 | |||
| 831AS302KDS | Ohmite Mfg Co | RoHS : Compliant | 140 | |||
| 2111-1X40G10R-2.8-3.1-1.4 | 100 | |||||
| 083-185-RFX | 25 | |||||
| 08318-0 | 20 | |||||
| 2011-1X40TR-5.8-3.1-1.4B | 9 | |||||
![]() Richardson RFPD | 77083104P | CTS Corporation | Res Thick Film NET 100K Ohm 2% 1.1W ±100ppm/C ISOL RoHS : Compliant |
| 0 | |
| 935311183178 | NXP Semiconductors | Trans RF FET N-CH 133V 5-Pin NI-1230S T/R RoHS : Compliant |
| 0 | ||
AD8315ARMZ![]() | Analog Devices Inc | RF Detector 100MHz to 2500MHz 8-Pin MSOP Tube RoHS : Compliant |
| 0 | ||
| AD8310ACHIPS | Analog Devices Inc | SP Amp LOG Amp Single R-R I/P 5.5V 9-Pin Die Tray RoHS : Compliant | 0 | |||
AD8315ARMZ-RL![]() | Analog Devices Inc | RF Detector 100MHz to 2500MHz 8-Pin MSOP T/R RoHS : Compliant |
| 0 | ||
| LT8315IFE#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Flyback 142kHz 16-Pin TSSO RoHS : Compliant |
| 0 | ||
| 8310-352-R | Spectrum Control | STEP ATTENUATOR | 0 | |||
| AD8312ACBZ-P2 | Analog Devices Inc | RF Detector 50MHz to 3500MHz 6-Pin WLCSP T/R RoHS : Compliant | 0 | |||
| 5831-7501-000 | Radiall | Between Series Adapt RoHS : Not Compliant | 0 | |||
| 742X083101JP | CTS Corporation | Res Thick Film Array 100 Ohm 5% 0.25W(1/4W) ±200pp RoHS : Compliant |
| 0 | ||
| MFBW1V1608-310-R | Eaton Corporation | Ferrite Beads Multi-Layer 31Ohm 25% 100MHz 1A 0.08 RoHS : Compliant |
| 0 | ||
| R110083120W | Radiall | Conn MMCX PL 0Hz to 6GHz 50Ohm Crimp ST Cable Moun RoHS : Compliant |
| 0 | ||
| R125383120 | Radiall | RF COAX CABLE MT CON |
| 0 | ||
| PMH8318TP | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| ADM8316WDW49ARJZR7 | Analog Devices Inc | Processor Supervisor 4.9V 1 Active Low/Push-Pull A RoHS : Compliant |
| 0 | ||
![]() Rutronik | 02183.15MXP | Littelfuse Inc | 3.15A 250V slow 5x20 glass IEC RoHS : Compliant |
| 31,000 | |
| P/N8317 | Keystone Electronics Corp | LED SPACER MOUNT BI-LEAD RoHS : Compliant |
| 8,000 | ||
| 878315119 | Molex | 06P MILLI-GRID HEAD 2R 2,00PITC RoHS : Compliant |
| 3,100 | ||
| 10108831-401AV03LF | Amphenol Communications Solutions | Unshrouded Header Bergstik 2.54mm RoHS : Compliant |
| 2,940 | ||
| 10018783-11100TLF | Amphenol Communications Solutions | 36P PCI-Express Card-Edge RoHS : Compliant |
| 1,960 | ||
| 38312000000 | Littelfuse Inc | 2A 300V slow TR5 long pins RoHS : Compliant |
| 1,000 | ||
| 38311000000 | Littelfuse Inc | 1A 300V slow TR5 long pins RoHS : Compliant |
| 1,000 | ||
| 10018783-12003TLF | Amphenol Communications Solutions | 164P PCI-Express x16 Vertical RoHS : Compliant |
| 900 | ||
| 61083-143402LF | Amphenol Communications Solutions | 140P BTB 2 ROW VERICAL HEADER RoHS : Compliant |
| 450 | ||
| 10018783-11103TLF | Amphenol Communications Solutions | 164P PCI-Express Card-Edge RoHS : Compliant |
| 180 | ||
| 83.11.0.240.0000 | FINDER SpA | Timer Monofunction 1CO 240V RoHS : Compliant |
| 150 | ||
| SD1H338M1831MPA | Samwha Electronics | SD 3300uF 50V 20% 18x31/7,5 RoHS : Compliant |
| 100 | ||
| 48.31.7.024.0050 | FINDER SpA | Koppel 24DC 10A 1CO RoHS : Compliant |
| 100 | ||
| 48.31.7.012.0050 | FINDER SpA | Koppel 12DC 10A 1CO RoHS : Compliant |
| 50 | ||
| 878311420 | Molex | 14P MILLI-GRID HEADER 2R SMC RoHS : Compliant |
| 32 | ||
![]() Chip 1 Exchange | 741X083103JP | CTS Corporation | INSTOCK RoHS : Compliant | 81,088 | ||
| 927831-2 | TE Connectivity | INSTOCK RoHS : Compliant | 37,180 | |||
| 7158-3114-90 | INSTOCK | 20,010 | ||||
| CRA06S08315K0JTA | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 15,000 | |||
| 742X083101JP | CTS Corporation | INSTOCK RoHS : Compliant | 7,012 | |||
| MMA02040C3831F##00 | Vishay Intertechnologies | INSTOCK | 3,123 | |||
| 741C083100JPTR | CTS Corporation | INSTOCK | 900 | |||
| PNX8317HS/C102 | INSTOCK | 597 | ||||
| 3-338314-2 | TE Connectivity | INSTOCK RoHS : Compliant | 231 | |||
| 83161118 | INSTOCK | 194 | ||||
| 61083-103402LF | INSTOCK | 160 | ||||
| 7282-5831 | INSTOCK | 100 | ||||
| 878311421- | Molex | INSTOCK | 38 | |||
| 750831-1 | TE Connectivity | INSTOCK RoHS : Compliant | 12 | |||
| M83723/72W1831N | INSTOCK | 1 | ||||
![]() Avnet Asia | BD8316GWL-BFE2 | ROHM Semiconductor | (Alt: BD8316GWL-BFE2) RoHS : Compliant |
| 15,000 | |
| G831M0060F211HR | Amphenol Corporation | Conn Stacking SKT 60 POS 5mm 0.5mm Solder ST SMD T/R (Alt: G831M0060F211HR) RoHS : Compliant |
| 4,500 | ||
| 1717831-2 | TE Connectivity | (Alt: 1717831-2) RoHS : Compliant |
| 1,000 | ||
| PG0083.182NLT | Pulse Electronics Corporation | (Alt: PG0083.182NLT) RoHS : Compliant |
| 1,000 | ||
| 2118310-2 | TE Connectivity | (Alt: 2118310-2) RoHS : Compliant |
| 600 | ||
| 0878313220 | Molex | Pin Header, 32 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Shrouded, Phosphor Bronze, THT (Alt: 0878313220) RoHS : Compliant | 0 | |||
| 923831-E | TE Connectivity | Conn Hard Metric Header 66 POS 2mm Press Fit RA Through Hole (Alt: 923831-E) RoHS : Compliant | 0 | |||
| 89898-313LF | Amphenol Corporation | (Alt: 89898-313LF) RoHS : Compliant | 0 | |||
| 61083-103402LF | Amphenol Corporation | (Alt: 61083-103402LF) RoHS : Compliant | 0 | |||
| E5J88-31LJ24-L | Pulse Electronics Corporation | (Alt: E5J88-31LJ24-L) RoHS : Compliant | 0 | |||
| ECH8310-TL-H | onsemi | P-Channel Power MOSFET, -30 V, -9 A, 17 mO (Alt: ECH8310-TL-H) RoHS : Compliant | 0 | |||
| 8314/2H | ebm-papst | (Alt: 8314/2H) RoHS : Compliant | 0 | |||
| 0444783111 | Molex | (Alt: 0444783111) RoHS : Compliant | 0 | |||
| 10018783-10002MLF | Amphenol Corporation | (Alt: 10018783-10002MLF) RoHS : Compliant | 0 | |||
| 10188312-06R002 | Amphenol Corporation | (Alt: 10188312-06R002) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | EBS10-8 3118135 | Chiphomer Technology Ltd | 200 | |||
| 87831-0620 | Molex | RoHS : Compliant | 8 | |||
| 138316 | Bstmer | 2 | ||||
![]() Component Electronics, Inc | MBB02070C3831FRP00 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 44,700 | |
| CR0402F3831T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 9,900 | ||
| CR21A3831FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 8,000 | ||
| CCF-55-2-3831FT-2 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 5,000 | ||
| CRCW12063831FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,800 | ||
| 77083104P | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 60 | ||
| 8317-10R | Vishay Dale | IN STOCK SHIP TODAY | 40 | |||
| 831-01328T | Elec & Eltek | IN STOCK SHIP TODAY | 40 | |||
| 741X083103JP | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 39 | ||
| PIC1657-831 | Microchip Technology Inc | IN STOCK SHIP TODAY | 19 | |||
ADN8831ACPZ-REEL7![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| LBSW-1C8316317 | AGILTRON | IN STOCK SHIP TODAY | 8 | |||
ADUC831BS![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| EGS-1-80-.383-1%-B12 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 6 | ||
| AZ9831-1A-12D | ZETTLER Magnetics Inc | IN STOCK SHIP TODAY |
| 4 | ||
![]() DB Roberts | 47-83-122-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| AELS9-518-312W | PennEngineering (PEM) | 0 | ||||
| D8-314-110-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-113-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-120-190 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-228-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-238-190 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-3014-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-3017-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-3024-190 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-334-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-337-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-415-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-418-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| D8-314-425-190 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
![]() EBV Elektronik | AEDR-8311-1K0 | Broadcom Limited | (Alt: AEDR-8311-1K0) RoHS : Compliant | 1,000 | ||
| PIC16LF18313-E/RF | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 35KB Flash 33V 8Pin UDFN EP Tube (Alt: PIC16LF18313-E/RF) RoHS : Compliant | 600 | |||
| AEDR-8310-1V2 | Broadcom Limited | Reflective Surface Mount Optical Encoder TR (Alt: AEDR-8310-1V2) RoHS : Compliant | 500 | |||
| MPC8314ECVRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314ECVRAGDA) RoHS : Compliant | 216 | |||
| MPC8313EVRAFFC | NXP Semiconductors | Microprocessor MPC8313 Series 333 MHz TEPBGAII191 (Alt: MPC8313EVRAFFC) RoHS : Compliant | 80 | |||
| MPC8314CVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314CVRADDA) RoHS : Compliant | 36 | |||
| FOD8318R2 | onsemi | 25 A Output Current IGBT Drive Optocoupler With Active Miller Clamp (Alt: FOD8318R2) RoHS : Compliant | 0 | |||
| CHL8318CRT | Infineon Technologies AG | (Alt: SP001524998) RoHS : Compliant | 0 | |||
| FOD8314TR2 | onsemi | 10 A Output Current Gate Drive Optocoupler in Stretched Body SOP 6Pin ONSSPCISTNJZ8E4V (Alt: FOD8314TR2) RoHS : Compliant | 0 | |||
| ECH8310-TL-H | onsemi | PChannel Power MOSFET 30 V 9 A 17 mO (Alt: ECH8310-TL-H) RoHS : Compliant | 0 | |||
| ATA6831C-PIQW | Microchip Technology Inc | Analog Linear ICs SD non Std MPP Part 1 (Alt: ATA6831C-PIQW) RoHS : Compliant | 0 | |||
| AEDR-8310-1V1 | Broadcom Limited | Reflective Surface Mount Optical Encoder TR (Alt: AEDR-8310-1V1) RoHS : Compliant | 0 | |||
| MPC8314VRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314VRAGDA) RoHS : Compliant | 0 | |||
| AEDR-8311-1K2 | Broadcom Limited | (Alt: AEDR-8311-1K2) RoHS : Compliant | 0 | |||
| MPC8315CVRAGDA | NXP Semiconductors | Microprocessor MPC8315 Series 400 MHz TEPBGAII191 (Alt: MPC8315CVRAGDA) RoHS : Compliant | 0 | |||
![]() ECCO | 0583144000 | ITT Interconnect Solutions |
| 815 | ||
| 0583137000 | ITT Interconnect Solutions |
| 453 | |||
| 10-831386-000 | Amphenol Industrial Operations |
| 428 | |||
| 0583139000 | ITT Interconnect Solutions |
| 270 | |||
| 0583141000 | ITT Interconnect Solutions |
| 196 | |||
| 0583140000 | ITT Interconnect Solutions |
| 49 | |||
| 10-831290-01P | Amphenol Industrial Operations |
| 24 | |||
| M24308/3-1Z | ITT Interconnect Solutions | RoHS : Not Compliant |
| 20 | ||
![]() FDH Electronics | 983-6KE18-31S7-L | TE Connectivity | Connector |
| 95 | |
| NAS1831A3B06 | FDH Electronics | Placeholder | 88 | |||
| 983-7S18-31S7-L | TE Connectivity | Connector |
| 50 | ||
| 983-0SE18-31S6L | TE Connectivity | Connector |
| 41 | ||
| 983-6SE18-31P8-L | TE Connectivity | Connector |
| 25 | ||
| S2831F1816-R | SOURIAU-SUNBANK | Connector Acc | 18 | |||
| BACC45FN18-31PH | Cinch Connectivity Solutions | Connector Misc | 9 | |||
| S2831F1220-R | SOURIAU-SUNBANK | Backshells & Ac | 6 | |||
| BACC45FT18-31P8H | rms Company | Connector Misc | 6 | |||
| 88083-14-19PN | TE Connectivity | Placeholder | 2 | |||
| BACC45FN18-31PH | rms Company | Connector Misc | 2 | |||
| S2831FM6506-2 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| S2831F0304-2 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| S2831FM6710-R | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| MS24658-31N | Honeywell Sensing and Control | Switches RoHS : Unknown | 0 | |||
![]() Neutron USA | 4831.2300 | Schurter Electronic Components | Connector AUDIO SOCKET 2.5MM 3P SOLDER RoHS : Compliant |
| 50 | |
| 8315100322 | ebm-papst | ebm-papst 8315100322 Axial Fan, AxiForce, 48VDC,93.6cfm,12W,0.24A,10000rpm,80x80x38mm,BB |
| 50 | ||
| CSB-M831M831 | Banner Engineering Corp | Y Splitter, Str M8 M 3p 0.2m to 2 Str M8 F 3p 0.2m, Black PUR cord, 77718 |
| 1 | ||
| 48.31.8.120.0060SPA | FINDER SpA | Interface Module; SPDT 10A; 120V AC coil; LED & varistor; screw terminal socket |
| 0 | ||
| 704.908.3-1 | EAO AG | Switch Contact Blocks / Switch Kits Snap-action switching element SA 2NO PIT silver |
| 0 | ||
| 831060C3.BL | Crouzet | Basic/Snap Action Switch, Micro Switch, SPDT, 5A 250VAC, Plunger, Pin, Quick Connect |
| 0 | ||
| 8312R | ebm-papst | DC Fans DC TUBEAXIAL FAN |
| 0 | ||
| 83139503 | Crouzet | Microswitch, SPDT (DB/DM) Chassis Mount, 5A 125V, Round (Pin Plunger) |
| 0 | ||
| 83181010 | Crouzet | Basic/Snap Action Switch, Microswitch, Subminiature, V4S-8318 Series, 83181 I X3S, SPDT, 6A 250VAC, Solder Pin |
| 0 | ||
| 9831881 | WIKA Instrument LP | Analog Positive Press Gauge Bottom Entry 100psi,Connection Size 1/4 NPT |
| 0 | ||
| 4X70G88317-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2133 ECC UDIMM FOR LENOVO - 4X70G88317, TOP GRADE CHIPS AND COMP |
| 0 | ||
| MPC8314VRAGDA | NXP Semiconductors | Microprocessors - MPU NON-ENCRYPT RoHS : Compliant |
| 0 | ||
| 8315100115 | ebm-papst | Blowers & Centrifugal Fans Centrifugal, 65.5x64.5x64.1mm, 24V, 15.1CFM, 32W, 1.3A, 58dB, 40000RPM, Tach |
| 0 | ||
| AXG23591683/1 | Axiom Manufacturing | Axiom PC3-8500 Unbuffered Non-ECC 1066MHz 2GB Module TAA Compliant |
| 0 | ||
| 8314/2H | ebm-papst | DC Fans DC TUBEAXIAL FAN |
| 0 | ||
![]() Pasternack Enterprises US | PE3W05483-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. MMCX Plug Right Angle to MMCX Plug Cable 100 cm Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug right angle to MMCX plug cable 100 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug right angle to MMCX plug cable 100 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and MMCX cable connection on the other. Our right angle MMCX to MMCX cable assemblies have a plug gender on end 1 and plug on end 2. This MMCX to MMCX cable is a plug to plug coax assembly, PE3W05483-100CM, can also be known as a right angle MMCX male to MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W05483-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05483-100CM can also be used in the other direction and will be MMCX plug to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug cable 100 cm length using PE-SR405FLJ coax. |
| 1,292 | |
| PE3C2183-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2183-120 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2183-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax. |
| 768 | ||
| PE3FCA183-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA183-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA183-10M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 84 | ||
| PE3W11883-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to N Male Cable Using SPO-375 Coax Using Times Microwave Parts in 12 inch., Radio frequency assembly outdoor rated 7/16 DIN male to N male cable using SPO-375 coax using Times Microwave parts in 12 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male cable using SPO-375 coax using Times Microwave parts in 12 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to N type cable is a male to male coax assembly, PE3W11883-12, can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W11883-12 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11883-12 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male cable using SPO-375 coax using Times Microwave parts in 12 inch. |
| 73 | ||
| PE3C6183-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 7/16 DIN Male Right Angle to 7/16 DIN Female Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on one end and TC-SPP250-716F-LP 7/16 DIN cable connection on the other. Our low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6183-150CM, can also be known as a low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly PE3C6183-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-RA-LP 7/16 DIN cable assembly is manufactured with right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle male to TC-SPP250-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6183-150CM can also be used in the other direction and will be TC-SPP250-716F-LP 7/16 DIN female to right angle TC-SPP250-716M-RA-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 10 | ||
| PE3M0083-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 12 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to TNC male cable 12 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to TNC male cable 12 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3109 SMA to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3109 SMA cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our right angle M39012/56-3109 SMA to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3109 SMA to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0083-12, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3109 SMA plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3109 SMA plug to M39012/26-0011 TNC plug cable assembly PE3M0083-12 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/56-3109 SMA cable assembly is manufactured with right angle M39012/56-3109 SMA to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/56-3109 SMA right angle male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0083-12 can also be used in the other direction and will be M39012/26-0011 TNC male to right angle M39012/56-3109 SMA male cable assembly if the opposite connectivity is required. M39012/56-3109 SMA right angle plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3109 SMA to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/56-3109 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to TNC male cable 12 inch length using M17/128-RG400 coax. |
| 8 | ||
| PE3C8316-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male Right Angle to N Female Bulkhead Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female bulkhead low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female bulkhead low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8316-150CM can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8316-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8316-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8316-150CM can also be used in the other direction and will be a type N female bulkhead to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8318-48 can also be known as a low PIM right angle 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8318-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8318-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8318-48 can also be used in the other direction and will be a right angle type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05831 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Push-On SMP Female to SMA Female Bulkhead Cable Using RG405 Coax. PE3W05831 is a SMP female to SMA female bulkhead cable using RG405 coax. This Pasternack SMP female to SMA female bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female SMP to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05831 SMP female to SMA female bulkhead cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W07383-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to BNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax., Radio frequency assembly SMA female to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle BNC cable connection on the other. Our low loss SMA to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. PE3W07383-12 can also be known as a low loss SMA jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to BNC plug cable assembly PE3W07383-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07383-12 can also be used in the other direction and will be right angle BNC male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax. |
| 0 | ||
| PE3C8310-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Female Bulkhead to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female bulkhead to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 bulkhead cable connection on one end and a right angle type N cable connection on the other. Our low PIM 4.3-10 to right angle type N cable assembly has a female gender on end 1 and a male on end 2. PE3C8310-100CM can also be known as a low PIM 4.3-10 jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.867-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8310-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our bulkhead 4.3-10 female to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to type N plug cable assembly PE3C8310-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8310-100CM can also be used in the other direction and will be a right angle type N male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8313-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male to N Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8313-150CM can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8313-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8313-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8313-150CM can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8314-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to N Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8314-36 can also be known as a low PIM 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8314-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8314-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8314-36 can also be used in the other direction and will be a right angle type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0383-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Pin to MIL Size 8 Contact Pin Cable 12 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0383-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a M39029 pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0383-12 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0383-12 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 pin to M39029 pin cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0383-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01283-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SSMA Male Cable 100 CM Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to SSMA male cable 100 cm length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SSMA male cable 100 cm length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SSMA cable connection on the other. Our low loss SMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SSMA cable is a male to male coax assembly, PE3W01283-100CM, can also be known as a low loss SMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMA plug cable assembly PE3W01283-100CM is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01283-100CM can also be used in the other direction and will be SSMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMA male cable 100 cm length using PE-C100-LSZH coax. |
| 0 | ||
![]() TE Connectivity | 1-178315-2 | TE Connectivity | DYNAMIC S/ROW HDR 5P V ASSY PdNi & Au PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178315-2 | Internal Number: 1-178315-2 | TE Connectivity RoHS : Compliant |
| 23,499 | |
| 66183-1 | TE Connectivity | III+ SKT,SOLDER,30AU,10AU FLAS Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 26 – 20 AWG Wire Size: .12 – .5 mm² Gold (Au) Socket 26 – 20 AWG | Connector Contact | Part Number: 66183-1 | Internal Number: 66183-1 | Alias Number: T75372-000 | TE Connectivity RoHS : Compliant |
| 16,989 | ||
| 2483190-8 | TE Connectivity | 0.8mm Low-profile IDC Hdr RA WTB 8 Pos PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 2483190-8 | Internal Number: 2483190-8 | TE Connectivity RoHS : Compliant |
| 10,490 | ||
| 2483180-2 | TE Connectivity | 0.8mm Low-profile IDC Hdr Str WTB 2 Pos PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 2483180-2 | Internal Number: 2483180-2 | TE Connectivity RoHS : Compliant |
| 9,975 | ||
| 2483193-8 | TE Connectivity | 0.8mm Low-profile IDC Rcpt WTB 8 Pos Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Insulation Displacement (IDC) Standard Rectangular Connector | 8 Receptacle Housing With | Part Number: 2483193-8 | Internal Number: 2483193-8 | TE Connectivity RoHS : Compliant |
| 9,910 | ||
| 163083-1 | TE Connectivity | .062 DIA SOC ASS 3+ Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 18 – 16 AWG Wire Size: .75 – 1.5 mm² Tin (Sn) Socket 18 – 16 AWG | Connector Contact | Part Number: 163083-1 | Internal Number: 163083-1 | TE Connectivity RoHS : Compliant |
| 8,419 | ||
| 109028-31 | TE Connectivity | CONT PIN Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 20 – 16 AWG Wire Size: .5 – 1.5 mm² Gold (Au) Pin 20 – 16 AWG | Connector Contact | Part Number: 109028-31 | Internal Number: 109028-31 | TE Connectivity RoHS : Compliant |
| 1,924 | ||
| 8-31818-1 | TE Connectivity | SOLIS BUTT 22-16 COMM 22-18MIL Splice Type: Butt Splice Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Insulation Option: Uninsulated Butt Splice 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Electrical Wire Splice | Part Number: 8-31818-1 | Internal Number: 8-31818-1 | Alias Number: AMPS-8-0031818-1 | TE Connectivity RoHS : Compliant |
| 938 | ||
| 8-31819-1 | TE Connectivity | SPLICE,SOLIS BUTT 16-14 Splice Type: Butt Splice Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Insulation Option: Uninsulated Butt Splice 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Electrical Wire Splice | Part Number: 8-31819-1 | Internal Number: 8-31819-1 | Alias Number: A77918-000 | TE Connectivity RoHS : Compliant |
| 844 | ||
| 3-338314-2 | TE Connectivity | 15POS.HD20 REC.ASSY Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Cable-to-Board Board Mount | Part Number: 3-338314-2 | Internal Number: 3-338314-2 | TE Connectivity RoHS : Compliant |
| 572 | ||
| 770083-1 | TE Connectivity | 05P .093 COMM P&S RECPT HSG Number of Positions: 5 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 5 Receptacle Housing Crimp | Part Number: 770083-1 | Internal Number: 770083-1 | TE Connectivity RoHS : Compliant |
| 107 | ||
| 1648183-1 | TE Connectivity | 291-10-01100=SA CONN,PIN Contact Type: Pin Operating Voltage: 250 VAC Operating Voltage: 250 VDC Contact Retention Within Housing: With Termination Method to Wire & Cable: Crimp Pin 250 VAC 250 VDC With | Connector Contact | Part Number: 1648183-1 | Internal Number: 1648183-1 | Alias Number: 291-10-01100 | TE Connectivity RoHS : Compliant |
| 13 | ||
| 8-31895-1 | TE Connectivity | PIDG R 22-16COMM 22-18MIL 5/16 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: 5/16 M8 Closed Ring Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-31895-1 | Internal Number: 8-31895-1 | Alias Number: D59412-000 | TE Connectivity RoHS : Compliant |
| 7 | ||
| 5558310-1 | TE Connectivity | MOD/JK,ASSY,8 POS,R/A,KEY/SHLD Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Modular Connector Style: Jack RJ45 Single Port 1 x 1 RJ Type Jacks & Plugs | Rj45 Connector | Part Number: 5558310-1 | Internal Number: 5558310-1 | Alias Number: 1051284 | TE Connectivity RoHS : Compliant |
| 4 | ||
| 2-2342083-1 | TE Connectivity | 21POS HDR 90 DEG,HT,5.08MM PITCH,TL2.6MM Number of Positions: 21 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 21 Header Wire-to-Board .2" | Part Number: 2-2342083-1 | Internal Number: 2-2342083-1 | .2" | TE Connectivity RoHS : Compliant |
| 3 | ||
![]() Venkel Ltd. | PWCR1206-WK-3831FT | VENKEL LTD | Pulse Withstanding CR;1206;3/4W;�100PPM;3.83K;�1% RoHS : Compliant | 0 | ||
| AGCR0805-YK-3831FT | VENKEL LTD | Auto Grade Resistor;0805;1/3W;�100PPM;3.83K;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RP-3831FT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;3.83K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UE-3831CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;3.83K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UN-3831BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;3.83K;�0.1% RoHS : Compliant | 0 | |||
| HPTF2010-UP-3831UT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;3.83K;�0.01% RoHS : Compliant | 0 | |||
| MELFC0207-XC-3831FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;3.83K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-TC-3831CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;3.83K;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF1206-TN-3831AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;3.83K;�0.05% RoHS : Compliant | 0 | |||
| PWCR0805-RK-3831DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;3.83K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZN-3831FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�10PPM;3.83K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-3831BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;3.83K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-3831BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;3.83K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0207-XC-3831FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;3.83K;�1% RoHS : Not Compliant | 0 | |||
| MELFC0204-TZ-3831FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;3.83K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | 2083112-2 | TE Connectivity | Interconnection Device RoHS : Compliant | 13,110 | ||
| 44AM1831-10-MST3-9CS2275 | TE Connectivity | WIRE AND CABLE RoHS : Not Compliant | 12,855 | |||
| F339MX226831JCM2B0 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 0.0068uF, Through Hole Mount, 3916 RoHS : Compliant | 11,395 | |||
AD8313ARM-REEL![]() | Analog Devices Inc | Analog Circuit, 1 Func, BIPolar, PDSO8 RoHS : Not Compliant | 9,959 | |||
AD8315ARMZ-RL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, Bipolar, PDSO8 RoHS : Compliant | 8,752 | |||
| PEMH18,315 | Nexperia | Small Signal Bipolar Transistor | 8,544 | |||
| 69168-314HLF | Amphenol Communications Solutions | Board Connector, 14 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator | 8,270 | |||
| 78315SL199 | Alpha Wire | Wire And Cable, 10 Conductor(s), 26AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,240 | |||
AD8310ARMZ-REEL![]() | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 440MHz Band Width, BIPolar, PDSO8 RoHS : Compliant | 7,153 | |||
| MAX6831VGUT | Analog Devices Inc | Power Supply Management Circuit, BICMOS, PDSO6 RoHS : Not Compliant | 6,533 | |||
AD8315ARMZ![]() | Analog Devices Inc | Telecom Circuit, 1-Func, Bipolar, PDSO8 RoHS : Compliant | 5,971 | |||
| M3008316045NX0ITBR | Renesas Electronics Corporation | MRAM, 512KX16, Parallel, PDSO54 RoHS : Compliant | 5,590 | |||
ADN8831ACPZ-REEL7![]() | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 5,447 | |||
| AD8310ACHIPS | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, 440MHz Band Width, BIPolar RoHS : Compliant | 5,116 | |||
| E5J88-31LJ24-L | Pulse Electronics Corporation | Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Locking, Jack | 508 | |||
![]() Waytek, Inc. | 7158-3114-90 | Yazaki Corp | Yazaki 2.8 Blue Cavity Plug |
| 20,751 | |
| 7158-3113-40 | Yazaki Corp | 12-10 GA Yazaki 2.8 Cable Seal |
| 5,995 | ||
| 7158-3111-60 | Yazaki Corp | 18-16 GA Yazaki 2.8 Cable Seal |
| 2,345 | ||
| 831N0V02 CONNECTOR | VTE Incorporated | 175 Series Connector Cover ANDERSON SB 175 SERIES |
| 1,794 | ||
| 91583-1 | TE Connectivity | Crimp Ratchet Tool, AMP Terminals 20-16 AWG Contacts, 38295 & 39296 RoHS : Unknown |
| 7 | ||
| 9831-2535B | Egis Mobile Electric | XD NMEA 2000 Triple - (Relay/VSR/Relay), w/Knobs 12P DT |
| 6 | ||
| 7158-3112-70 | Yazaki Corp | 16-14 GA Yazaki 2.8 Cable Seal |
| 0 | ||
![]() Win Source Electronics | ES8311 | Everest Semiconductor Co Ltd | QFN-20-EP(3x3) Signal Switches, Multiplexers, Decoders RoHS |
| 33,563 | |
| 02183.15MXEP | Littelfuse Inc | FUSE GLASS 3.15A 250VAC 5X20MM RoHS : Compliant |
| 30,724 | ||
AD8314ARM-REEL7![]() | Analog Devices Inc | IC RF DETECTOR\\CTRLR 8-MSOP RoHS : Not Compliant |
| 24,000 | ||
MCP73831-2DCI/MC![]() | Microchip Technology Inc | IC BATT CONTRL LI-ION 1CELL 8DFN / Charger IC Lithium Ion/Polymer 8-DFN (2x3) RoHS : Compliant |
| 12,001 | ||
AD8310ARMZ-REEL![]() | Analog Devices Inc | RoHS : Compliant |
| 8,630 | ||
| AD8312ACBZ | Analog Devices Inc |
| 6,000 | |||
ADN8831ACPZ-REEL7![]() | Analog Devices Inc | Sensor and Detector Interface 5.5V 8mA 32-Pin LFCSP EP T/R / IC THERMO COOLER CTRLR 32LFCSP RoHS : Compliant |
| 4,500 | ||
| IRF7831TRPBF | Infineon Technologies AG | MOSFET N-CH 30V 21A 8-SOIC RoHS : Compliant |
| 3,900 | ||
AD8313ARM-REEL![]() | Analog Devices Inc | IC LOG DETECTOR/CTRLR 8-MSOP RoHS : Not Compliant |
| 3,650 | ||
AD8313ARMZ-REEL![]() | Analog Devices Inc | IC RF DETECT 100MHZ-2.5GHZ 8MSOP / RF Detector IC RADAR, 802.11/WiFi, 8.2.16/WiMax, Wireless LAN 100MHz ~ 2.5GHz -65dBm ~ 0dBm ±1dB 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 3,570 | ||
ADUC831BS![]() | Analog Devices Inc | MicroConverter, 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU RoHS : Not Compliant |
| 3,000 | ||
| 83100000005 | Littelfuse Inc | FUSE HOLDER CART 250V 6.3A PCB RoHS : Compliant |
| 2,000 | ||
| AD831APZ-REEL7 | Analog Devices Inc | IC MIXER 500MHZ DWN CONV 20PLCC RoHS : Compliant |
| 1,010 | ||
| RTL8316B | Realtek Semiconductor | RoHS : Not Compliant |
| 1,007 | ||
| AD831APZ-REEL | Analog Devices Inc | Up/Down Conv Mixer ±5V 400MHz 20-Pin PLCC T/R / IC MIXER 500MHZ DWN CONV 20PLCC RoHS : Compliant |
| 990 | ||
![]() Wuhan P&S | 61083-182402LF | Amphenol FCi | 180Pos,Dual Row,0.8mm,BTB Vertical Header RoHS : Compliant |
| 1,100 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |