 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
888-5-R330F Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
 Newark | TLE8888QKXUMA1 | Infineon Technologies AG | Engine Machine System Ic, -40To150Deg C; Available Until Stocks Are Exhausted |Infineon Technologies TLE8888QKXUMA1 RoHS : Compliant |
| 30,856 | |
| TLE8888QKXUMA1 | Infineon Technologies AG | Engine Machine System Ic, -40To150Deg C; Available Until Stocks Are Exhausted |Infineon Technologies TLE8888QKXUMA1 RoHS : Compliant |
| 30,856 | ||
| MAX8888EZK33+T | Analog Devices Inc | Ldo, Fixed, 3.3V, 0.3A, Tsot-23-5; |Analog Devices, Inc. MAX8888EZK33+T RoHS : Compliant |
| 2,346 | ||
| MAX8888EZK33+T | Analog Devices Inc | Ldo, Fixed, 3.3V, 0.3A, Tsot-23-5; |Analog Devices, Inc. MAX8888EZK33+T RoHS : Compliant |
| 2,346 | ||
| MAX38888ATD+T | Analog Devices Inc | Dc/Dc Conv, 2Mhz, Tdfn-14, 85Deg C; |Analog Devices, Inc. MAX38888ATD+T RoHS : Compliant |
| 1,861 | ||
| MAX38888ATD+T | Analog Devices Inc | Dc/Dc Conv, 2Mhz, Tdfn-14, 85Deg C; |Analog Devices, Inc. MAX38888ATD+T RoHS : Compliant |
| 1,861 | ||
| 1888811-1 | TE Connectivity | Std Hdmi, Ra, Th, Stacked 2X, Panel Grd; |Te Connectivity 1888811-1 RoHS : Compliant |
| 1,152 | ||
| 2487888-8 | TE Connectivity | Mezzanine Conn, Plug, 80Pos, 2Row, 0.8Mm; |Te Connectivity 2487888-8 RoHS : Compliant |
| 330 | ||
| 1888810-2 | TE Connectivity | Dust/Emi Cover, Zinc Alloy; |Te Connectivity 1888810-2 RoHS : Compliant |
| 70 | ||
| CH58888 | Eaton Cutler-Hammer | Man Bypass Kit For K-Base Meter Sockets; |Eaton Cutler Hammer CH58888 RoHS : Not Compliant |
| 8 | ||
| HC8888000000SB000 | YAGEO Corporation | Capacitor Kit, 3120 Pieces, 60 Values; |Yageo HC8888000000SB000 RoHS : Compliant |
| 4 | ||
| CS8888000000SB000 | YAGEO Corporation | Capacitor Kit, 2080 Pieces, 50 Values; |Yageo CS8888000000SB000 RoHS : Compliant |
| 2 | ||
| MAX38888EVKIT# | Analog Devices Inc | Eval Kit, Super Cap Backup Regulator; |Analog Devices, Inc. MAX38888EVKIT# RoHS : Compliant |
| 1 | ||
| HCV888800000SB000 | YAGEO Corporation | Capacitor Kit, 2480 Pieces, 58 Values; |Yageo HCV888800000SB000 RoHS : Compliant |
| 1 | ||
| 888 | Keystone Electronics Corp | Spacer, Round, Nylon 6.6, 6.35X19.05Mm; |Keystone 888 RoHS : Compliant |
| 0 | ||
 RS | 888 | Keystone Electronics Corp | SPACER, 1/4 ROUND, CLEAR HOLE, LENGTH .750, HOLE SIZE 6, NYLON 6/6 |
| 2,118 | |
| 3448-3008 (8.88786E+12) | 3M | ACCESSORIES, 3448 3008 |
| 100 | ||
| 4304.6063 (6762X8888A30022) | Schurter Electronic Components | PEM,1P LINE SWTCH,1P FUSEHLDR, IEC, C14,250VAC,10A,4.8 BLADE-L/N, SNAP, BLK RCKR, PC1 |
| 96 | ||
| 1SNA173888R2000 (017388820) | TE Connectivity | BP8.A4 BRIDGING PLUG, ENTRELEC |
| 60 | ||
| 1888810-2 | TE Connectivity | 1888810 DUST COVER FOR USE WITH QSFP CONNECTOR, XFP CONNECTOR RoHS : Compliant |
| 24 | ||
| 7038888 | RS Pro | WHITE PANEL MOUNT INDICATOR, 12V DC, 14MM MOUNTING HOLE SIZE, SOLDER TAB, IP67 |
| 6 | ||
| 22303TB-H-BX (0075028888) | Dichtomatik | OIL SEAL, 2.25" ID, 3" OD, 3.75" WIDTH, N700M MATERIAL |
| 5 | ||
| 58884BE | Color-Keyed | COPPER TWO-HOLE LUG,646 KCMIL,1/2"BOLT SIZE, DIE CODE 106,DIE CODE BLACK |
| 4 | ||
| 4304.6058 (6762X8888A10024) | Schurter Electronic Components | PEM,2P LINE SWITCH,1P FUSEHLDR, IEC, C14,250VAC,10A,4.8 BLADE-L/N, FLNG/CNTRSNK, PC1 |
| 4 | ||
| P-36-0 (1888570) | Pomona Electronics | PIN TIP PLUG, PIN TIP PLUG, BRASS PER QQ-B-626, ALLOY 360, 1/2 HARD, 20 AWG |
| 2 | ||
| 2508888 | RS Pro | THERMAL OVERLOAD RELAY, 1NC/1NO, 16 A CONTACT RATING, 5.4 W, 4000 V AC |
| 1 | ||
| 2508883 | RS Pro | THERMAL OVERLOAD RELAY, 1NC/1NO, 4 A CONTACT RATING, 5.4 W, 4000 VAC |
| 1 | ||
| 58889 (58889-1) | Klein Tools Inc | ADJUSTABLE PADDED SHOULDER STRAP, COMPATIBLE WITH KLEIN 5003 SERIES BAGS |
| 1 | ||
| 888 | Adafruit Industries | ALUMINUM IPHONE 4S 0.8MM 5-POINT STAR/PENTALOBE SCREWDRIVER |
| 0 | ||
| 888 | RACO | 4-11/16" COVER - 2.625 OPENING 30A-60A |
| 0 | ||
 ComSIT USA | B41888C5187M | TDK Electronics | SINGLE-ENDED ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 180uF, Through Hole Mount RoHS : Compliant | 32,000 | ||
| LFXTAL057888REEL | IQD Frequency Products | CRYSTAL 13.5672MHz �30ppm �30ppm HC-49 RoHS : Compliant | 10,000 | |||
MAX8881EUT33+T | Maxim Integrated Products | LDO Regulator Pos 3.3V 0.2A 6-Pin SOT-23 T/R RoHS : Compliant | 9,255 | |||
| 3000888 | First Sensor | Electronic Component RoHS : Compliant | 7,211 | |||
| FR9888ASPCTR | Fitipower Integrated Technology Inc | IC VOLT REG Adjustable Step-Down Buck 1OUT 925mV - 14.5V 3A 8-SOIC T/R RoHS : Compliant | 2,375 | |||
| MAX8880EUT+T | Maxim Integrated Products | LDO Regulator Pos 1.25V to 5V 0.2A 6-Pin SOT-23 T/R RoHS : Compliant | 1,800 | |||
| SMT588890577 | Neosid Pemetzrieder GmbH & Co | Electronic Component RoHS : Not Compliant | 993 | |||
| MT8888CSR1 | Zarlink Semiconductor Inc | INTEGRATED DTMF TRANSCEIVER WITH INTEL MICRO INTERFACE DTMF Signaling Circuit, CMOS, PDSO20 RoHS : Compliant | 820 | |||
| B65888A2002X | TDK Electronics | CLAMP Clips/Clamps RoHS : Compliant | 360 | |||
| 2SC1888 | TSC Electronics Ltd | Transistor RoHS : Not Compliant | 200 | |||
| MC68881RC12B | Motorola Semiconductor Products | Math Processor, CMOS, CPGA68 RoHS : Not Compliant | 24 | |||
| QS888815P | Qualcomm | 16K X 4 CACHE TAG SRAM Cache Tag SRAM, 16KX4, 15ns, CMOS, PDIP22 RoHS : Not Compliant | 12 | |||
| MC68882RC16A2C12R | Motorola Semiconductor Products | HCMOS ENHANCED FLOATING-POINT COPROCESSOR Math Coprocessor, 32-Bit, HCMOS, CPGA68 RoHS : Not Compliant | 4 | |||
MC68882CFN33A | Freescale Semiconductor | HCMOS ENHANCED FLOATING-POINT COPROCESSOR Math Coprocessor, 32-Bit, HCMOS, PQCC68 RoHS : Not Compliant | 2 | |||
| MC68881RC16B | Motorola Semiconductor Products | Math Processor, CMOS, CPGA68 RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | 1888810-2 | TE Connectivity | EMI/DUST COVER,XFP AND QSFP RoHS : Compliant |
| 1,925 | |
| 248-8888-007 | ITT Interconnect Solutions | 248-8888-007 | 0 | |||
| 2288887-1 | TE Connectivity | 121/C4/11Q2 RECEPT RoHS : Not Compliant |
| 0 | ||
| 1-455888-8 | TE Connectivity | SPACER, CRIMPER(085) |
| 0 | ||
| GG8888M1J | Amphenol Positronic | 0 | ||||
| GG8888F183 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| 00460888839 | ITT Interconnect Solutions | 48849-24GGLT39 | 0 | |||
| GG8888F10 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| 1-1418888-6 | TE Connectivity | 6POS,MODU II,HEADER ASSY RoHS : Compliant | 0 | |||
| 3-1418888-2 | TE Connectivity | 6POS MQS .63 HEADER 90DEG THR RoHS : Compliant |
| 0 | ||
| GG8888F1J | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| 1-1888861-1 | TE Connectivity | SHIELDED RA RECEPT 36 POS,15AU RoHS : Compliant |
| 0 | ||
| 1888862-8 | TE Connectivity | SHIELD RECPT RA 36P P/F NOKEY |
| 0 | ||
| 10638888NF1404 REV B | Glenair Inc | 0 | ||||
| 20008888-00 | TE Connectivity | 4604-030-197T-D | 0 | |||
 PEI Genesis | 038888-0103 | ITT Interconnect Solutions |
| 0 | ||
| GG8888F10 | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| 038888-0004 | ITT Interconnect Solutions |
| 0 | |||
| 038888-0000 | ITT Interconnect Solutions |
| 0 | |||
| GG8888M10 | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| 050-628-9188890 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 10-035888-141 | Amphenol Corporation |
| 0 | |||
| 50-622-9188-890 | ITT Interconnect Solutions |
| 0 | |||
| MS27488-8-3 | Aiconics |
| 0 | |||
| 038889-0101 | ITT Interconnect Solutions |
| 0 | |||
| 4214108-88 | SOURIAU-SUNBANK |
| 0 | |||
| 8884.0 | CONTA-CLIP Inc |
| 0 | |||
| K888S | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 50-628-9188-890 | ITT Interconnect Solutions |
| 0 | |||
| 50-610-3188-890 | ITT Interconnect Solutions |
| 0 | |||
 PUI | 12.88809 | Geyer Electronic E K | RoHS : Compliant | 10,139 | ||
| 12.88816 | 7,880 | |||||
| 12.88810 | 7,880 | |||||
| 8949-ID888-06SB0BA | Oupiin | RoHS : Compliant | 390 | |||
| 12.88801 | 126 | |||||
| 8949-ID2888/06S1BA | Oupiin | RoHS : Compliant | 46 | |||
| FX888DX-010BY | 26 | |||||
 Avnet Silica | STD888T4 | STMicroelectronics | Bipolar BJT Single Transistor PNP 30 V 10 A 15 W TO252 DPAK Surface Mount (Alt: STD888T4) RoHS : Compliant | 7,500 | ||
TSC888BILT | STMicroelectronics | Current Sense Amp Single 4V to 24V 5Pin SOT23 TR (Alt: TSC888BILT) RoHS : Compliant | 3,000 | |||
| FA10888_TINA-RS | LEDIL | ASSEMBLY ROUND 1 POS 161MM OD 109MM H (Alt: FA10888_TINA-RS) RoHS : Compliant | 1,872 | |||
| MT8889CN1 | Microchip Technology Inc | DTMF TXRX 358MHz CMOS 5V 24Pin SSOP Tube (Alt: MT8889CN1) RoHS : Compliant | 58 | |||
| MT8888CS1 | Microchip Technology Inc | (Alt: MT8888CS1) RoHS : Compliant | 0 | |||
| MT8888CN1 | Microchip Technology Inc | DTMF TXRX 358MHz CMOS 5V 24Pin SSOP Tube (Alt: MT8888CN1) RoHS : Compliant | 0 | |||
| BD68888MUV-E2 | ROHM Semiconductor | (Alt: BD68888MUV-E2) RoHS : Compliant | 0 | |||
| BD68888AEKV-E2 | ROHM Semiconductor | (Alt: BD68888AEKV-E2) RoHS : Compliant | 0 | |||
| MP8880GVE-XXXX-Z | Monolithic Power Systems | DCDC Switching Regulator Adjustable Synchronous Buck Step Down 600 mV to 48 V 4A 450 kHz (Alt: MP8880GVE-XXXX-Z) RoHS : Compliant | 0 | |||
| MP8880AGVE-0000-Z | Monolithic Power Systems | DCDC Switching Regulator Adjustable Synchronous Buck Step Down 600 mV to 48 V 45A 22 MHz (Alt: MP8880AGVE-0000-Z) RoHS : Compliant | 0 | |||
| NVTFS6H888NLWFTAG | onsemi | Single NChannel Power MOSFET 80V 13A 50mO Logic Level WDFN8 PbFree Wettable Flanks (Alt: NVTFS6H888NLWFTAG) RoHS : Compliant | 0 | |||
| LAN8881MT-E/8DWVAO | Microchip Technology Inc | VelocityDRIVE 1001000BASET1 Auto Ethernet PHY Transceiver with MACsec (Alt: LAN8881MT-E/8DWVAO) RoHS : Compliant | 0 | |||
| MPQ8887GVE-0000-AEC1-Z | Monolithic Power Systems | QFN24 65V 9A HighEfficiency Buck Converter with I2C Interface Configurable Frequency (Alt: MPQ8887GVE-0000-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ8887GVE-0000-AEC1-P | Monolithic Power Systems | Switching Voltage Regulators 36V 5A FourSwitch (Alt: MPQ8887GVE-0000-AEC1-P) RoHS : Compliant | 0 | |||
| MPQ8880AGVE-0000-AEC1-Z | Monolithic Power Systems | (Alt: MPQ8880AGVE-0000-AEC1-Z) RoHS : Compliant | 0 | |||
 DB Roberts | DIN933-M5X18-8.8-ZI | DIN HARDWARE | HEX CAP SCREW FULL THREAD |
| 50 | |
| 8888 | Heyco | SCBS-2000 BLACK 100' ROLL | 0 | |||
| 388-8803-00 | Acumnet / Camcar | 0 | ||||
| 1788-832-A | RAF Electronic Hardware | 0 | ||||
| 388-80559-00 | Acumnet / Camcar | 0 | ||||
| 388-80583-00 | Acumnet / Camcar | 0 | ||||
| 388-80030-00 | Acumnet / Camcar | 0 | ||||
| 388-80562-00 | Acumnet / Camcar | 0 | ||||
| 388-80561-00 | Acumnet / Camcar | 0 | ||||
| 464888 | Essentra Components | 0 | ||||
| 495888 | Essentra Components | 0 | ||||
| 62-0-8887-11 | Southco | 0 | ||||
| 388-80560-00 | Acumnet / Camcar | 0 | ||||
| 388-80540-00 | Avdel | 7-18X .472 12MM TX PAN HEAD PL | 0 | |||
| CN-68-8-8 | Southco | These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit | 0 | |||
 ECCO | MS27488-8 | Step'n Components |
| 497 | ||
 Pasternack Enterprises US | PE3W18884/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Water Blue FAKRA Jack Right Angle to FAKRA Plug Low Loss Cable 36 Inch Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack right angle to FAKRA plug low loss cable 36 inch length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack right angle to FAKRA plug low loss cable 36 inch length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle FAKRA cable connection on one end and a FAKRA cable connection on the other. Our low loss right angle FAKRA to FAKRA cable assembly has a jack gender on end 1 and a plug on end 2. PE3W18884/HS-36 can also be known as a low loss right angle FAKRA female to FAKRA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18884/HS-36 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle FAKRA jack to FAKRA plug cable has a maximum VSWR of 1.4:1. FAKRA female to FAKRA male cable assembly PE3W18884/HS-36 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded.Both connectors have a crimp/solder attachment method and a plastic body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18884/HS-36 can also be used in the other direction and will be a FAKRA plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA right angle female to FAKRA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to FAKRA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 927 | |
| PE3C5888 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using SPP-250-LLPL Coax, LF Solder. PE3C5888 is a SMA male to SMA male cable using SPP-250-LLPL coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3C5888 SMA male to SMA male cable assembly is constructed with SPP-250-LLPL coax. | 702 | |||
| PE3W17888/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to N Male Low Loss Cable 24 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly 4.3-10 male to N male low loss cable 24 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to N male low loss cable 24 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17888/HS-24 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17888/HS-24 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3W17888/HS-24 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17888/HS-24 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 329 | ||
| PE38881-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to UMCX Plug Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to UMCX plug cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX plug cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX cable connection on the other. Our SMA to UMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX cable is a male to plug coax assembly, PE38881-24, can also be known as a SMA plug to UMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX male cable assembly PE38881-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to UMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38881-24 can also be used in the other direction and will be UMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX plug cable 24 inch length using RG178 coax. |
| 81 | ||
| PE38881-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to UMCX Plug Cable 18 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to UMCX plug cable 18 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX plug cable 18 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX cable connection on the other. Our SMA to UMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX cable is a male to plug coax assembly, PE38881-18, can also be known as a SMA plug to UMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX male cable assembly PE38881-18 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to UMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38881-18 can also be used in the other direction and will be UMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX plug cable 18 inch length using RG178 coax. |
| 81 | ||
| PE3C5888-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum SMA Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum SMA male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5888-36, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5888-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 78 | ||
| PE3C5888-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum SMA Male to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum SMA male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5888-100CM, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5888-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 78 | ||
| PE3C5888-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum SMA Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum SMA male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5888-12, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5888-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 78 | ||
| PE38888 | Pasternack Enterprises | 0 | ||||
| PE3W18888LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Plug, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW400, RF Cable Type: LMR-LW400, RF Cable Impedance: 50 Ohm. Reverse Polarity N Plug to Reverse Polarity N Plug Cable Using LMR-LW400 Coax, LF Solder. PE3W18888LF is a reverse polarity N plug to reverse polarity N plug cable using LMR-LW400 coax. This Pasternack reverse polarity N plug to reverse polarity N plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity plug N to reverse polarity plug N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18888LF N reverse polarity plug to N reverse polarity plug cable assembly is constructed with LMR-LW400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08888 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to QMA Male Cable Using RG405 Coax. PE3W08888 is a SMP female right angle to QMA male cable using RG405 coax. This Pasternack SMP female right angle to QMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm QMA for connector 2. SMP right angle to QMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male QMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08888 SMP female right angle to QMA male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C4888-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to N type cable is a jack to male coax assembly, PE3C4888-6, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to type N plug cable assembly PE3C4888-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4888-6 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to N type cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 6 inch length using RG405 coax. |
| 0 | ||
| PE3W23888 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Female Bulkhead to Reverse Thread SMA Female Bulkhead Cable Using TCOM-195 Coax. PE3W23888 is a reverse thread SMA female bulkhead to reverse thread SMA female bulkhead cable using TCOM-195 coax. This Pasternack reverse thread SMA female bulkhead to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse thread female SMA bulkhead to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23888 SMA reverse thread female bulkhead to SMA reverse thread female bulkhead cable assembly is constructed with TCOM-195 coax. | 0 | |||
| PE3W08882-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MHV Female Bulkhead to MHV Female Bulkhead Cable 200 cm Length Using RG58 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable 200 cm length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable 200 cm length using RG58 coax, MHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV bulkhead cable connection on one end and MHV bulkhead cable connection on the other. Our MHV to MHV cable assemblies have a female gender on end 1 and female on end 2. PE3W08882-200CM can also be known as a MHV jack to MHV jack cable assembly and will be shipped same-day as it is purchased. MHV jack to MHV jack cable assembly PE3W08882-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency MHV female bulkhead to MHV female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV female bulkhead to MHV female bulkhead cable 200 cm length using RG58 coax. |
| 0 | ||
| PE3W18886LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG316 Coax, LF Solder. PE3W18886LF is a SMA male to SMA male right angle cable using RG316 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18886LF SMA male to SMA male right angle cable assembly is constructed with RG316 coax. | 0 | |||
 Vyrian | SAF-XC888-8FFA5VAC | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP64 RoHS : Compliant | 13,324 | ||
| 1988888 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 13,126 | |||
| 1888807 | Phoenix Contact | Barrier Strip Terminal Block, 13.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,495 | |||
| 1888803-1 | TE Connectivity | Board Connector RoHS : Compliant | 10,838 | |||
| MAX8888EZKXY | Analog Devices Inc | Analog Circuit | 10,581 | |||
| 5962-01-306-8888 | Analog Devices Inc | Operational Amplifier, 4 Func, 3500uV Offset-Max, BIPolar, CDIP14 RoHS : Not Compliant | 10,235 | |||
| SM288888PMSR | Texas Instruments | 9,101 | ||||
| MAX8888EZK15-G24 | Analog Devices (Maxim Integrated) | 5,507 | ||||
| MAX8888EZK18+ | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, BICMOS, PDSO5 RoHS : Compliant | 5,137 | |||
| 1768888 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,772 | |||
MAX8888EZK23-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.3V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant | 1,086 | |||
| MAX8888EZK22-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.2V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant | 700 | |||
| MAX8888EZK26-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.6V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant | 487 | |||
| MAX8888EZK19-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 1.9V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant | 316 | |||
| MAX8888EZK24-T | Maxim Integrated Products | Fixed Positive LDO Regulator, 2.4V, 0.2V Dropout, BICMOS, PDSO5 RoHS : Not Compliant | 47 | |||
 Waytek, Inc. | 131888-91 | General Cable Technologies Corporation | 16GA GXL Gray Cross-Link Automotive Wire XLPE -51C to 125C |
| 117,500 | |
| 1418884-1 | TE Connectivity | AMP 1.5 Female 16-14GA Reel RoHS : Compliant |
| 58,500 | ||
| 7100163888 | 3M | 22-18GA Male Disconnect Red Nylon .250 X .032 Fully Insulated |
| 31,160 | ||
| 1418884 | TE Connectivity | AMP 1.5 Female 16-14GA Loose Piece |
| 12,136 | ||
| 0888250.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 250A RoHS : Compliant |
| 476 | ||
| 0888200.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 200A RoHS : Compliant |
| 317 | ||
| 0888450.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 450A RoHS : Compliant |
| 317 | ||
| 0888060.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 60A RoHS : Compliant |
| 256 | ||
| 0888300.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 300A RoHS : Compliant |
| 209 | ||
| 0888650.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 650A RoHS : Compliant |
| 31 | ||
| 08098881 | Littelfuse Inc | Battery Master Switch SPST W/Chain and Boot 250A M10 Term |
| 10 | ||
| 88-843 | Ideal Industries Inc | Hand Operated Indentor CRIMPER TOOL IDEAL 88-843 ADJUSTABLE 8 TO 250 KCMIL |
| 2 | ||
 Win Source Electronics | MAX38888ATD+T | Maxim Integrated Products | IC BATT MFUNC SUPERCAP 14TDFN |
| 150,000 | |
FDS8884 | Fairchild Semiconductor Corporation | MOSFET N-CH 30V 8.5A 8-SOIC RoHS : Compliant |
| 68,819 | ||
| FDS8884-NL | Fairchild Semiconductor Corporation |
| 65,070 | |||
| FDD8880 | Fairchild Semiconductor Corporation | MOSFET N-CH 30V 58A DPAK / Trans MOSFET N-CH 30V 13A 3-Pin(2+Tab) DPAK T/R RoHS : Compliant |
| 34,300 | ||
| MAX8881EUT33 | Maxim Integrated Products | IC REG LINEAR 3.3V 200MA SOT23-6 RoHS : Not Compliant |
| 30,000 | ||
UCC28880DR | Texas Instruments | IC OFF-LINE SWITCH PWM 7SOIC RoHS : Compliant |
| 11,850 | ||
MAX8880EUT+ | Maxim Integrated Products | IC REG LIN POS ADJ 200MA SOT23-6 RoHS : Compliant |
| 10,122 | ||
| MAX38888ATD+ | Analog Devices Inc | IC BATT MFUNC SUPERCAP 14TDFN RoHS : Compliant |
| 9,800 | ||
| MAX8887EZK33-T | Maxim Integrated Products | IC REG LINEAR LDO / Linear Voltage Regulator IC Positive Fixed 1 Output 300mA TSOT-23-5 RoHS : Not Compliant |
| 8,339 | ||
DRV8880RHRT | Texas Instruments | IC MOTOR DRIVER 28WQFN / Dual H-Bridge Motor Driver 28-Pin WQFN EP T/R RoHS : Compliant |
| 8,050 | ||
| MAX8880EUT+T | Maxim Integrated Products | IC REG LDO ADJ 0.2A SOT23-6 RoHS : Compliant |
| 5,067 | ||
| TLE8888QK | Infineon Technologies AG | RoHS : Compliant |
| 5,000 | ||
| PCF8883T/1 | Nexperia |
| 3,333 | |||
LM118J-8/883 | Texas Instruments | LM118QML Operational Amplifier RoHS : Not Compliant |
| 1,713 | ||
| 900-82888-0040-000 | NVIDIA | Jetson AGX Xavie Module 512-Core Volta GPU, 32 GB LPDDR4 |
| 69 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand