| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty.
BuyNow |
DB Roberts | 17W09853
| Essentra Components | | | 0
 |
17W09853B
| Essentra Components | FLAT WASHER, .781 ID, 1.000 OD | | 0
|
20569853
| Essentra Components | 6MM HOLE STRAIGHT WALL PULL P | | 0
|
FDH Electronics | 9853-14-35PC-PT-M134
| Sealtron Inc | Hermetic Conn | | 6
 |
M85049/8-53N
| Glenair Inc | Backshells & Ac | | 1
|
M85049/8-53W
| Glenair Inc | Connector | 1 : $1,664.109
5 : $1,551.288
10 : $1,386.758
25 : $1,366.06
50 : $1,366.06
100 : $1,345.971
250 : $1,307.514
500 : $1,271.194
1,000 : $1,253.781
2,500 : $1,253.781
10,000 : $1,253.781
|
| 0
|
M85049/8-53Z
| Glenair Inc | Connector | 1 : $1,684.582
5 : $1,570.373
10 : $1,403.818
25 : $1,382.866
50 : $1,382.866
100 : $1,362.529
250 : $1,323.6
500 : $1,286.833
1,000 : $1,269.205
2,500 : $1,269.205
10,000 : $1,269.205
|
| 0
|
Maritex | LP2985-33DBVR
 | Texas Instruments | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 2.2-16V; 0.15A; -40+125 deg.C; SMD; SOT23-5
RoHS : Compliant | 30,000 : $0.189
3,000 : $0.202
1,000 : $0.212
500 : $0.22
250 : $0.227
100 : $0.237
50 : $0.254
25 : $0.274
10 : $0.304
1 : $0.43
|
| 96
|
Pasternack Enterprises US | PE3W10985-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug Right Angle to SMA Female Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly MMCX plug right angle to SMA female low loss cable 36 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to SMA female low loss cable 36 inch length using PE-C100-LSZH coax, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle MMCX cable connection on one end and SMA cable connection on the other. Our low loss right angle MMCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. PE3W10985-36 can also be known as a low loss right angle MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA jack cable assembly PE3W10985-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5 GHz maximum frequency MMCX right angle plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10985-36 can also be used in the other direction and will be SMA female to right angle MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX right angle male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA female low loss cable 36 inch length using PE-C100-LSZH coax. | 1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1
|
| 1,546
|
PE9853B-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna, 15 GHz to 22 GHz Frequency Range, 20 dBi Gain, Flange. Pasternack’s PE9853B-20 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.83 inches, a width of 2.37 inches, and a weight of 0.05 lbs. Our antenna comes with a square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,340.0
5 : $1,286.4
10 : $1,232.8
25 : $1,179.2
|
| 6
|
PE9853B/SF-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 20, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz, 20 dBi Nominal Gain, SMA Female Input Connector, ProLine. The PE9853B/SF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853B/SF-20 waveguide horn antenna has a typical gain of 20 dB. This WR-51 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,730.0
5 : $2,620.8
10 : $2,511.6
25 : $2,402.4
|
| 6
|
PE9853B-10
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating from 15 GHz to 22 GHz with a Nominal 10 dBi Gain with Square Cover Flange. Pasternack’s PE9853B-10 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 1.42 inches, a width of 1.31 inches, and a weight of 0.5 lbs. Our antenna comes with a square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
|
| 4
|
PE9853/SF-15
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31.8, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz With a Nominal 15 dB Gain SMA Female Input. The PE9853/SF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853/SF-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31.8 degrees at 3 dB. This WR-51 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,030.0
5 : $1,948.8
10 : $1,867.6
|
| 0
|
PE3W09853
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMB Plug to SMA Male Cable Using PE-P195 Coax. PE3W09853 is a SMB plug to SMA male cable using PE-P195 coax. This Pasternack SMB plug to SMA male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. Our plug SMB to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09853 SMB plug to SMA male cable assembly is constructed with PE-P195 coax. | | 0
|
PE9853A-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz, Beam Width V: 16.9, Beam Width H: 18. WR-51 Waveguide Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz With a Nominal 20 dBi Gain With Square Cover Flange. Pasternack’s PE9853A-20 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.89 inches, a width of 2.63 inches, and a weight of 0.08 lbs. Our WR-51 waveguide horn antenna has a typical vertical beam width of 16.9 degrees and a horizontal beam width of 18 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an anodized aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,110.0
5 : $1,065.6
10 : $1,021.2
|
| 0
|
PE9853-10
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz, Beam Width V: 55.1, Beam Width H: 54.2. WR-51 Waveguide Standard Gain Horn Antenna Operating from 15 GHz to 22 GHz with a Nominal 10 dBi Gain with Square Cover Flange. Pasternack’s PE9853-10 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 1.43 inches, a width of 1.31 inches, and a weight of 0.01 lbs. Our WR-51 waveguide horn antenna has a typical vertical beam width of 55.1 degrees and a horizontal beam width of 54.2 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an anodized aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $930.99
5 : $893.75
10 : $856.51
|
| 0
|
PE9853B/SF-15
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 15, Beam Width, 3dB V: 31.8, Beam Width, 3dB H: 32, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating from 15 GHz to 22 GHz with a Nominal 15 dB Gain SMA Female Input. The PE9853B/SF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853B/SF-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 31.8 degrees and a horizontal beam width of 32 degrees at 3 dB. This WR-51 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,630.0
5 : $2,524.8
10 : $2,419.6
25 : $2,314.4
|
| 0
|
PE3C2985-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to N Female Bulkhead Low Loss Cable 36 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male right angle to N female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male right angle to N female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss right angle SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE3C2985-36, can also be known as a low loss right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE3C2985-36 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2985-36 can also be used in the other direction and will be type N female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS. | 1 : $383.99
25 : $364.79
50 : $345.59
|
| 0
|
PE9853-15
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz, Beam Width V: 32, Beam Width H: 31.8. WR-51 Waveguide Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz With a Nominal 15 dBi Gain With Square Cover Flange. Pasternack’s PE9853-15 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 2.84 inches, a width of 2.25 inches, and a weight of 0.11 lbs. Our WR-51 waveguide horn antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31.8 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an anodized aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,240.0
5 : $1,190.4
10 : $1,140.8
|
| 0
|
PE9853/SF-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 20, Beam Width, 3dB V: 16.9, Beam Width, 3dB H: 18, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz With a Nominal 20 dB Gain SMA Female Input. The PE9853/SF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853/SF-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 16.9 degrees and a horizontal beam width of 18 degrees at 3 dB. This WR-51 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,000.0
5 : $1,920.0
10 : $1,840.0
|
| 0
|
PE9853B/SF-10
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 10, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating from 15 GHz to 22 GHz with a Nominal 10 dB Gain SMA Female Input. The PE9853B/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853B/SF-10 waveguide horn antenna has a typical gain of 10 dB. This WR-51 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,470.0
5 : $2,371.2
10 : $2,272.4
25 : $2,173.6
|
| 0
|
PE3W19853LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-400-LLPX Coax with HeatShrink, LF Solder. PE3W19853LF/HS is a TNC male to SMA male cable using LMR-400-LLPX coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19853LF/HS TNC male to SMA male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE9853/SF-10
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 10, Beam Width, 3dB V: 55.1, Beam Width, 3dB H: 54.2, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz With a Nominal 10 dB Gain SMA Female Input. The PE9853/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853/SF-10 waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 55.1 degrees and a horizontal beam width of 54.2 degrees at 3 dB. This WR-51 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,630.0
5 : $1,564.8
10 : $1,499.6
|
| 0
|
TE Connectivity | 5177985-3
| TE Connectivity | 0.8FH,R05H.5,080,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 80 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant | 1,000 : $5.01
500 : $5.36
50 : $5.73
10 : $6.51
1 : $7.5
|
| 3,996
|
413985-3
| TE Connectivity | PLUG ASSY,STR,SMB RF Interface: SMB RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .187 in RF Connector Mated Outer Diameter (Approximate): 4.75 mm Impedance: 50 Ω SMB Plug .187" 4.75 mm | TE Connectivity
RoHS : Compliant | 1,000 : $7.13
500 : $7.48
250 : $7.76
50 : $8.58
25 : $9.24
10 : $9.64
1 : $11.01
|
| 1,997
|
770985-3
| TE Connectivity | MINI UMNL PIN 26-22AWG AU LP Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin-Lead Wire Size: 26 – 22 AWG Operating Voltage: 600 VAC Gold (Au) Pin Tin-Lead 26 – 22 AWG | TE Connectivity
RoHS : Compliant | 1,000 : $0.53
100 : $0.71
10 : $0.88
1 : $1.11
|
| 858
|
109853-1
| TE Connectivity | BASE, 40 POSITION Component Type: Fuse Holder Fuse Type: Mini ATM Fuse Number of Relays (Maximum): 6 Number of Positions: 40 Centerline (Pitch): .32 in Fuse Holder Mini ATM Fuse 6 40 | .32" | TE Connectivity
RoHS : Compliant | | 1
|
Vyrian | 1985386
| Phoenix Contact | Barrier Strip Terminal Block, 2A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant | | 6,600
|
2985372
| Phoenix Contact | Development Software | | 3,750
|
1985344
| Phoenix Contact | Barrier Strip Terminal Block, 2A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant | | 2,200
|
SY898530UTZTX
| Microchip Technology Inc | Low Skew Clock Driver, 898530 Series, 16 True Output(s), 0 Inverted Output(s), PQFP48
RoHS : Compliant | | 1,950
|
5962-9853801Q2A
 | Texas Instruments | ADC, Successive Approximation, 10-Bit, 1 Func, 8 Channel, Serial Access, CMOS, CQCC20
RoHS : Not Compliant | | 1,650
|
SN74BCT29853FN
| Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, PQCC28
RoHS : Not Compliant | | 1,350
|
5962-9853801Q2X
 | Texas Instruments | ADC, Successive Approximation, 10-Bit, 1 Func, 8 Channel, Serial Access, CMOS, CQCC20 | | 1,350
|
SN74BCT29853
| Texas Instruments | | | 880
|
LP2985-33YZUR
 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.575V Dropout, BIPolar, PBGA5 | | 620
|
LP2985-32YZQR
| Texas Instruments | Fixed Positive LDO Regulator, 3.2V, 0.575V Dropout, BIPolar, PBGA5 | | 590
|
LP2985-31YEQR
| Texas Instruments | Fixed Positive LDO Regulator, 3.1V, 0.575V Dropout, BIPolar, PBGA5 | | 560
|
1985302
| Phoenix Contact | Barrier Strip Terminal Block, 2A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant | | 550
|
LP2985-30YEUR
| Texas Instruments | Fixed Positive LDO Regulator, 3V, 0.575V Dropout, BIPolar, PBGA5 | | 360
|
LP2985-32YZUR
| Texas Instruments | Fixed Positive LDO Regulator, 3.2V, 0.575V Dropout, BIPolar, PBGA5 | | 280
|
2985330
| Phoenix Contact | Controllers/Accessories
RoHS : Compliant | | 270
|
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand