| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty.
BuyNow |
ComSIT USA | 25TZV100MTPA63X61
| Rubycon Corporation | AVAILABLE EU | | 1,061
 |
35JZV47MTPA63X61
| Rubycon Corporation | AVAILABLE EU | | 1,049
|
93548A636
| MCMASTER CARR SUPPLY COMPANY | AVAILABLE EU | | 14
|
Avnet Asia | 15-21UYC/S530-A6/3T
| Everlight Electronics Co Ltd | (Alt: 15-21UYC/S530-A6/3T)
RoHS : Compliant | | 0
|
50PK47MEFCTA6.3X11
| Rubycon Corporation | (Alt: 50PK47MEFCTA6.3X11)
RoHS : Compliant | | 0
|
CEET16410A63301
| Amphenol Corporation | PCIE COOL EDGE WITH METAL CAGE, X16, 30AU (Alt: CEET16410A63301)
RoHS : Compliant | | 0
|
SDINBDA6-32-ZA1213
| SanDisk Corporation | (Alt: SDINBDA6-32-ZA1213)
RoHS : Compliant | | 0
|
Flip Electronics | MMBTA63LT1G
 | onsemi | Stock, Ship Today
RoHS : Compliant | | 2,745
|
Maritex | TS5A63157DCKR
 | Texas Instruments | Other Interface ICs; TS5A63157DCKR; TEXAS INSTRUMENTS; 6; 5.5 V; 1.65 V; SOT-70-6
RoHS : Compliant | 500 : $0.24
150 : $0.279
50 : $0.316
5 : $0.405
1 : $1.263
|
| 4,328
 |
MMBTA63LT1G
| onsemi | Bipolar Transistors (BJT); MMBTA63LT1G; ON SEMICONDUCTOR; PNP; 30 V; 500 mA; 3
RoHS : Compliant | 6,000 : $0.038
3,000 : $0.041
1,000 : $0.045
300 : $0.05
100 : $0.069
10 : $0.093
1 : $0.289
|
| 1,713
|
NA6, 3KG, 0.3M WIRE, DP22
| MAVIN | Single point load cell; Capacity 3kg (30N); cable 0.3m; Accuracy: C2; Threaded holes: 22mm | 50 : $33.473
10 : $35.462
3 : $37.452
1 : $39.4758
|
| 10
|
NA6, 3KG, 0.3M WIRE, IP66, ROHS
| MAVIN | Single point load cell; Capacity 3kg (30N); cable: 0.3m; Accuracy: C2 | 50 : $33.473
10 : $35.462
3 : $37.452
1 : $39.4758
|
| 1
|
Pasternack Enterprises US | PE15A63002
| Pasternack Enterprises | Key Specifications, Gain: 25 dB, Power Output: 22 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 180 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 25 dB Gain, 22 dBm P1dB and SMA. PE15A63002 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 25 dB. input protected LNA amplifier PE15A63002 is rated at 15 Volts DC maximum and 180 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $1,140.0
5 : $1,094.4
10 : $1,048.8
|
| 16
|
PE15A63008
| Pasternack Enterprises | Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 2.6 GHz, Frequency, Max: 3.1 GHz, Noise Figure, Max: 1.6 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 2.6 GHz to 3.1 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63008 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2.6 GHz and maximum frequency of 3.1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.6 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63008 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $640.0
5 : $614.4
10 : $588.8
|
| 13
|
PE15A63015
| Pasternack Enterprises | | 1 : $4,780.0
5 : $4,588.8
10 : $4,397.6
25 : $4,206.4
|
| 8
|
PE15A63012
| Pasternack Enterprises | | 1 : $1,030.0
5 : $988.8
10 : $947.6
25 : $906.4
|
| 5
|
PE15A63016
| Pasternack Enterprises | | 1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
|
| 3
|
PE15A63021
| Pasternack Enterprises | | 1 : $4,890.0
5 : $4,694.4
10 : $4,498.8
25 : $4,303.2
|
| 2
|
PE15A63031
| Pasternack Enterprises | Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 500 MHz, Frequency, Max: 40 GHz, Gain, Min: 37 dB, Gain, Typical: 44 dB, 3rd Intercept Point: 25 dB, Connector Series: 2.92mm. 44 dB Gain, 20 dBm P1dB, 0.5 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 4.5 dB Noise Figure, 2.92mm. The PE15A63031 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 500 MHz and maximum frequency of 40 GHz. The PE15A63031 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 44 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 3 dB typical gain flatness along with 37 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63031 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 4.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. | 1 : $20,675.0
5 : $19,848.0
10 : $19,021.0
25 : $18,194.0
|
| 2
|
PE15A63007
| Pasternack Enterprises | Key Specifications, Gain: 30 dB, Power Output: 12 dBm P1dB, Frequency, Min: 2 GHz, Frequency, Max: 2.6 GHz, Noise Figure, Max: 1.2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 130 mA, Connector Series: SMA. 0.85 dB NF Input Protected Low Noise Amplifier, Operating from 2 GHz to 2.6 GHz with 30 dB Gain, 12 dBm P1dB and SMA. PE15A63007 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2 GHz and maximum frequency of 2.6 GHz. The significantly low noise figure of this radio frequency amplifier is 1.2 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63007 is rated at 15 Volts DC maximum and 130 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $1,620.0
5 : $1,555.2
10 : $1,490.4
|
| 1
|
PE15A63023
| Pasternack Enterprises | Key Specifications, Power Output: 18 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3.5 GHz, Gain, Min: 58 dB, Gain, Typical: 62 dB, Noise Figure, Max: 1.5 dB, 3rd Intercept Point: 26 dB, Connector Series: SMA. 62 dB Gain, 17 dBm P1dB, 0.01 GHz to 3.5 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 1.3 dB Noise Figure, SMA. The PE15A63023 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3.5 GHz. The PE15A63023 broadband amplifier has 2.2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 1.5 dB with a typical gain of 62 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 58 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63023 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 17 dB of typical 1dB compression point and 1.3 dBm of typical RF input power. The AC powered broadband amplifier is rated for 18 dBm of typical saturated output power along with typical reverse isolation of -75 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. | 1 : $7,840.0
5 : $7,526.4
10 : $7,212.8
25 : $6,899.2
|
| 1
|
PE15A63014
| Pasternack Enterprises | | | 1
|
PE15A63013
| Pasternack Enterprises | | 1 : $1,070.0
5 : $1,027.2
10 : $984.4
25 : $941.6
|
| 1
|
PE15A63010
| Pasternack Enterprises | Key Specifications, Gain: 28 dB, Power Output: 8 dBm P1dB, Frequency, Min: 3.1 GHz, Frequency, Max: 3.5 GHz, Noise Figure, Max: 1 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 55 mA, Connector Series: SMA. 0.8 dB NF Input Protected Low Noise Amplifier, Operating from 3.1 GHz to 3.5 GHz with 28 dB Gain, 8 dBm P1dB and SMA. PE15A63010 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 3.1 GHz and maximum frequency of 3.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1 dB with a typical gain of 28 dB. input protected LNA amplifier PE15A63010 is rated at 15 Volts DC maximum and 55 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $655.0
5 : $628.8
10 : $602.6
|
| 0
|
PE15A63019
| Pasternack Enterprises | | 1 : $1,340.0
5 : $1,286.4
10 : $1,232.8
25 : $1,179.2
|
| 0
|
PE15A63005
| Pasternack Enterprises | Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63005 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63005 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $610.0
5 : $585.6
10 : $561.2
|
| 0
|
PE15A63003
| Pasternack Enterprises | Key Specifications, Gain: 29 dB, Power Output: 23 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 190 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA. PE15A63003 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 29 dB. input protected LNA amplifier PE15A63003 is rated at 15 Volts DC maximum and 190 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. | 1 : $1,020.0
5 : $979.2
10 : $938.4
|
| 0
|
TE Connectivity | RQ73C2A63K4BTD
| TE Connectivity | RQ 0805 63K4 0.1% 10PPM 5K RL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A63K4BTD | Internal Number: 6-2176381-9 | TE Connectivity
RoHS : Compliant | 2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79
|
| 16,841
|
RP73PF2A634RBTDF
| TE Connectivity | RP 2A 0.25W 634R 0.1% 25PPM 1K RL Resistance Value: 634 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 634 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A634RBTDF | Internal Number: 9-2176091-9 | TE Connectivity
RoHS : Compliant | 500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5
|
| 956
|
RN73C2A63K4BTDF
| TE Connectivity | RN 0805 63K4 0.1% 10PPM 1KRL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A63K4BTDF | Internal Number: 1676399-2 | TE Connectivity
RoHS : Compliant | 500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2
|
| 785
|
RP73PF2A63R4BTDF
| TE Connectivity | RP 2A 0.25W 63R4 0.1% 25PPM 1K RL Resistance Value: 63.4 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A63R4BTDF | Internal Number: 2176091-5 | TE Connectivity
RoHS : Compliant | 500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5
|
| 388
|
YHVA630-5PHM-6MM-A
| TE Connectivity | HVA630-5phm,5x6sqmm,Key A Cable Assembly (End A): HVA630 Plug Operating Voltage: 850 VDC Cable Assembly Configuration: Single Ended Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F HVA630 Plug 850 VDC | Electric & Hybrid & Fuel Cell Cable Assembly | Part Number: YHVA630-5PHM-6MM-A | Internal Number: YHVA630-5PHM-6MM-A | TE Connectivity
RoHS : Compliant | | 5
|
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand