AM32F3 Price, Reseller, Stock

Bisco Industries

AM321613

SPRINGS

23

SWA-M32-13

Thomas & Betts

18

IUA-M3-2

PennEngineering (PEM)

4

Rochester Electronics

SIT8924AM-32-33E-66.666666X

SiTime Corporation

CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 66.666666MHz 2.97V ~ 3.63V Â±25ppm 4-SMD T/R
RoHS : Compliant

10,000 : $2.34
1,000 : $2.49
500 : $2.64
100 : $2.78
25 : $2.93

500

ComSIT USA

AM320240L8TNQWB3H

Ampire Co Ltd

Electronic Component
RoHS : Not Compliant

96

NexGen Digital

KAM32LR71H106KU

KYOCERA Corporation

2,200

Richardson RFPD

KAM32LR72A475KU

Kyocera AVX Components

Cap Ceramic 4.7uF 100V X7R 10% Pad SMD 1210 125C T
RoHS : Compliant

0

Rutronik

KAM32QR71H224KT

Kyocera AVX Components

KC 220nF 1210 10% 50V X7R AECQ
RoHS : Compliant

4,000 : $0.0627
8,000 : $0.0621
16,000 : $0.0621
24,000 : $0.0616
40,000 : $0.0616

8,000

Avnet Asia

KAM32LR72A475KU

Kyocera AVX Components

100V 4.7UF X7R 1210 10% AEC-Q200 (Alt: KAM32LR72A475KU)
RoHS : Compliant

5,000

KAM32LR72A225KU

Kyocera AVX Components

(Alt: KAM32LR72A225KU)
RoHS : Compliant

5,000

KAM32QR71H224KT

Kyocera AVX Components

(Alt: KAM32QR71H224KT)
RoHS : Compliant

0

Avnet Silica

AM3231

Microchip Technology Inc

(Alt: AM3231)
RoHS : Not Compliant

0

AM3215

Microchip Technology Inc

2 GHz to 18 GHz Bandpass Filter Bank (Alt: AM3215)
RoHS : Not Compliant

0

AM3257

Microchip Technology Inc

Filter Bank 4 to 20 GHz Bandpass Filter Bank (Alt: AM3257)
RoHS : Not Compliant

0

AM3231-EVAL

Microchip Technology Inc

Evaluation Board AM3231 (Alt: AM3231-EVAL)
RoHS : Not Compliant

0

AM3215-EVAL

Microchip Technology Inc

I2 GHz to 18 GHz Bandpass Filter Bank (Alt: AM3215-EVAL)
RoHS : Not Compliant

0

SIT8924AM-32-18E-25.000000T

SiTime Corporation

(Alt: SIT8924AM-32-18E-25.000000T)
RoHS : Compliant

0

SIT8924AM-32-33E-66.666666T

SiTime Corporation

AECQ100 OSCILLATOR WITH 55C TO 125C TEMP RANGE 55 TO 125C 5032 25PPM DEFAULT DR STR 33V (Alt: SIT8924AM-32-33E-66.666666T)
RoHS : Compliant

0

Braemac Americas-Symmetry

FO7HSCAM32.0-T1

Abracon Corporation

SMD Oscillator, 32 MHz, 100.0 ppm, -40 To +85 C, 3.3V+-10%, HCMOS, 7 x 5 mm
RoHS : Compliant

1 : $0.625

0

DB Roberts

CLA-M3-2

PennEngineering (PEM)

Type CLA aluminum nuts are recommended for use in aluminum sheet with a hardness of HRB 50 or less on the Rockwell B scale.Unplated threads are sized to accept a basic go gauge after .00025 plating.

1 : $0.1387
100 : $0.1285
500 : $0.1123
1,000 : $0.1071
5,000 : $0.1038

16,591

FHA-M3-20

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

TSOA-M3-200

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types TSO TSOS and TSOA self-clinching threaded standoffs provide permanent threads in s

0

CFHA-M3-20

PennEngineering (PEM)

These studs ensure permanent mounting in metal sheets as thin as 1.60mm.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to

0

IUA-M3-2

Standard Insert

Designed for use in tapered holes.Tapered mounting hole allows for rapid and accurate alignment prior to installation.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

10,000 : $0.1077

0

CHA-M3-20

PennEngineering (PEM)

These studs ensure permanent mounting in metal sheets as thin as 1.60mm.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to

0

PPA-M3-2

Standard Insert

Press-fit insert with strong reusable threads. No heat or ultrasonics required.Slotted insert compresses allowing easy access into the mounting hole.Aluminum inserts ideal for light weight designs.Aluminum inserts offer lead-free alternative.

10,000 : $0.1384

0

PFLA-M3-2

Standard Insert

Press-fit insert with strong reusable threads. No heat or ultrasonics required.Flange-head eliminates direct contact of plastic with mating parts.Slotted insert compresses allowing easy access into the mounting hole.Aluminum inserts ideal for light weigh

0

BSOA-M3-20

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

0

FHA-M3-25

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

0

IUAA-M3-2

Standard Insert

Designed for use in tapered holes.Tapered mounting hole allows for rapid and accurate alignment prior to installation.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

0

LKA-M3-2

PennEngineering (PEM)

PEM� PEMFLEX� self-locking self-clinching fasteners retain their repeated use and effective prevailing locking torque.Shoulder provides increased performance.Flexing action permits repeated use and effective locking torque.Flange provides positive stop d

0

BSOA-M3-22

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

0

BSOA-M3-25

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

0