| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty.
BuyNow |
Bisco Industries | AP404610
| MISCELLANEOUS | | | 1
 |
TME | LRMAP4026C-3L0FT1
| TT Electronics plc | Resistor: thick film; 3mΩ; SMD; 4026; 4W; ±1%; 6.6x3mm; -65÷170°C | | 4,000
|
LRMAP4026C-2L0FT1
| TT Electronics plc | 2mΩ; ±1%; 5W; -65÷170°C; 4026; SMD; 75ppm/°C; 6.6x3mm | | 4,000
|
LAP-401DD
| ROHM Semiconductor | Display: LED; 7-segment; 10.16mm; No.char: 1; orange; 30mcd; anode
RoHS : Compliant | 500 : $0.94
300 : $1.06
100 : $1.11
50 : $1.19
43 : $1.68
|
| 3,884
|
LRMAP4026B-L20FT1
| TT Electronics plc | Resistor: thick film; 200uΩ; SMD; 4026; 5W; ±1%; 6.6x3mm; -65÷170°C | | 2,000
|
LRMAP4026B-L70FT1
| TT Electronics plc | 700uΩ; ±1%; 5W; -65÷170°C; 4026; SMD; 75ppm/°C; 6.6x3mm | | 2,000
|
LRMAP4026B-1L0FT1
| TT Electronics plc | 1mΩ; ±1%; 5W; -65÷170°C; 4026; SMD; 75ppm/°C; 6.6x3mm | | 1,000
|
LRMAP4026B-L30FT1
| TT Electronics plc | Resistor: thick film; 300uΩ; SMD; 4026; 5W; ±1%; 6.6x3mm; -65÷170°C | | 1,000
|
LRMAP4026A-L20FT1
| TT Electronics plc | Resistor: thick film | | 1,000
|
HM1F43TAP400H6LF
| Amphenol Corporation | Connector: DIN 41612; data | | 768
|
HM1F44TAP400H6LF
| Amphenol Corporation | Connector: DIN 41612; socket; data; PIN: 192; angled; Press-Fit | | 185
|
YD369-G33-AP400000
| TE Connectivity | YD369-G33-AP400000
RoHS : Compliant | 100 : $42.1
50 : $42.95
25 : $44.2
2 : $51.47
|
| 102
|
TAP400000000
| Teltonika | Module: access point; Ethernet 10/100Mbps,WiFi; Ø158x30mm; IP30 | | 4
|
AP400K1
| Brevetti CEA | Mounting holder; MEDIUM; for cable chain | 10 : $10.4
5 : $11.14
1 : $11.51
|
| 2
|
RAP40A5
| Carlo Gavazzi Holding AG | Relay: solid state
RoHS : Not Compliant | | 1
|
0ADAP4000-RE
| Bel Fuse | Fuse: fuse; 6.3x32mm; ceramic; THT; 4A; 600VAC; 600VDC; quick blow
RoHS : Compliant | | 0
 |
ComSIT USA | BAP40025ER0225FT
| DEVICE TECHNOLOGIES | AVAILABLE EU | | 21
|
Interstate Connecting Components | YD369-G66-AP400000
| TE Connectivity | 369 6 WAY INLINE 90 PCB REC, G
RoHS : Compliant | | 0
|
K04R-SRDA5-6AP40
| Amphenol FCi | FLEXFAST SINGLE K04R PITCH 1.0 | | 0
|
YD369-G33-AP400000
| TE Connectivity | 369 3 WAY INLINE 90 PCB REC, G
RoHS : Compliant | | 0
|
YD369-B66-AP400000
| TE Connectivity | 369 6 WAY PANEL MNT REC, 90 PC
RoHS : Compliant | | 0
|
YD369-G99-AP400000
| TE Connectivity | 369 9 WAY INLINE 90 PCB REC, G
RoHS : Compliant | | 0
|
YD369-B33-AP400000
| TE Connectivity | 369 3 WAY PANEL MNT REC, 90 PC
RoHS : Compliant | | 0
|
PEI Genesis | KAP40
| Daniels Manufacturing Corporation (DMC) | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
TPAP405
| Daniels Manufacturing Corporation (DMC) | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
Powell Electronics | HM1F43TAP400H6LF
| Amphenol FCi | Cable Assembly
RoHS : Unknown | | 507
|
HM1F44TAP400H6LF
| Amphenol FCi | Cable Assembly
RoHS : Compliant | | 122
|
PMSTRAP40
| Hammond Manufacturing | SS STRAP 0.05 WIDTH 36L | 1 : $71.66
25 : $66.88
30 : $62.7
|
| 116
|
YD369-B66-AP400000
| TE Connectivity | Unspecified Connectors
RoHS : Compliant | 2 : $69.2
5 : $68.0
10 : $66.81
20 : $65.61
100 : $59.65
|
| 100
|
YD369-G33-AP400000
| TE Connectivity | Unspecified Connectors
RoHS : Compliant | 3 : $50.05
7 : $49.19
14 : $48.32
27 : $47.47
100 : $43.15
|
| 67
|
YD369-G99-AP400000
| TE Connectivity | Unspecified Connectors
RoHS : Compliant | 2 : $74.37
5 : $73.09
9 : $71.81
18 : $70.53
|
| 46
|
Richardson RFPD | TECA-AP-40-12
| Wakefield-Vette | Air to Air Thermoelectric Cooler Assemblies
RoHS : Compliant | | 0
|
TEMA-AP-40-12
| Wakefield-Vette | FAN
RoHS : Compliant | | 0
|
MCAP400
| RF Industries | Marking Cap
RoHS : Compliant | | 0
|
DB Roberts | BAP4-0025-ER0201
| Device Technologies Inc | | 1 : $123.75
100 : $123.75
109 : $123.75
|
| 109
|
EBV Elektronik | ASMM-CF03-AP402
| Broadcom Limited | LED Single Chip YellowGreen 570nm 30mA 2Pin PLCC TR (Alt: ASMM-CF03-AP402)
RoHS : Compliant | | 0
|
Master Electronics | MAP40-3101G
| Bel Power Solutions | AC/DC Power Supply Triple-OUT 5V/24V/-12V 3A/1A/0.3A 40W
RoHS : Compliant | 60 : $266.93
45 : $272.38
30 : $400.14
15 : $783.43
10 : $785.4
5 : $787.36
1 : $789.34
|
| 14
|
V8D1HW6C-AP400-0
| Carling Technologies | Rocker Switch - SPDT - Mom-Off-Mom - 20A 12VDC - Locking Actuator - 12VAC/DC Incandescent Red Illumination - 0.250 (6.3mm) Quick Connect.
RoHS : Compliant | 500 : $9.95
300 : $9.97
100 : $12.37
50 : $12.72
25 : $12.9
10 : $13.1
5 : $13.42
|
| 8
|
RAP40A5
| Carlo Gavazzi Holding AG | Relay SSR 12mA 40V DC-IN 5A 440V AC-OUT 4-Pin SIP
RoHS : Compliant | | 0
|
V8D1CWTB-AP400-0
| Carling Technologies | V-SERIES ROCKER SWITCH
RoHS : Compliant | 100 : $13.26
75 : $13.53
50 : $17.09
25 : $27.77
|
| 0
|
MAP40-3500
 | Bel Power Solutions | AC/DC Power Supply Triple-OUT 5V/12V/-12V 5A/1A/0.3A 40W
RoHS : Compliant | 100 : $118.35
11 : $120.72
6 : $123.09
3 : $125.45
2 : $127.83
|
| 0
|
V8D1CW6B-AP400-0
| Carling Technologies | V-SERIES ROCKER SWITCH
RoHS : Compliant | 100 : $13.27
75 : $13.54
50 : $14.51
25 : $19.35
|
| 0
|
R7MAP40030
| OMRON Industrial Automation |
RoHS : Compliant | | 0
|
V6D1CW6C-AP400-0
| Carling Technologies | V-SERIES ROCKER SWITCH
RoHS : Compliant | 100 : $13.53
75 : $13.8
50 : $14.79
25 : $19.72
|
| 0
|
LRMAP4026C-3L0FT1
| TT Electronics Welwyn Components | LRMAP4026 Series 3 Ohm ±1% Low Resistance Metal Alloy Power Resistor
RoHS : Compliant | 1,000 : $1.04
750 : $1.06
500 : $1.13
250 : $1.5
100 : $1.51
50 : $1.52
45 : $1.53
|
| 0
|
R2E190-AP40-13
| ebm-papst |
RoHS : Compliant | 100 : $173.53
50 : $178.09
20 : $191.4
10 : $196.64
5 : $199.37
1 : $205.07
|
| 0
|
LRMAP4026B-1L0FT1
| TT Electronics Welwyn Components | Current Sense Resistors - SMD .001OHM1% 5W
RoHS : Compliant | 1,000 : $0.874
750 : $0.892
500 : $0.956
250 : $1.274
100 : $1.277
55 : $1.28
|
| 0
|
PMSTRAP40
| Hammond Manufacturing | stainless steel strap
RoHS : Compliant | 100 : $66.0
50 : $66.88
20 : $68.71
10 : $72.7
5 : $74.87
1 : $80.9
|
| 0
|
LAP400
| OMRON Industrial Automation | SERVO 400W 230VAC 1PH
RoHS : Compliant | | 0
|
YC9Z-RHU10AP40
| IDEC Corporation | THERMAL OVERLOAD 0.25-0.4A
RoHS : Compliant | 250 : $37.33
100 : $37.83
50 : $41.22
25 : $42.99
10 : $44.91
5 : $48.94
1 : $54.84
|
| 0
|
YD369-G66-AP400000
| TE Connectivity | 369 6 WAY INLINE 90 PCB REC GOLD PIN MOQ Reduction
RoHS : Compliant | 100 : $52.84
75 : $53.92
50 : $76.63
25 : $144.74
|
| 0
|
Neutron USA | MAP40-3101G
| Bel Power Solutions | Power Supplies - Chassis Mount POWER SUPPLY | | 50
|
CAP-40/1/440R
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40+1 MFD 370/440V ROUND CAP
RoHS : Unknown | | 10
|
CAP-40/7.5/440R
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40+7.5 MFD 370/440V ROUND CAP
RoHS : Unknown | | 10
|
CAP-40/3/440R
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40+3 MFD 370/440V ROUND CAP
RoHS : Unknown | | 9
|
CAP-40/4/440R
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40+4 MFD 370/440V ROUND CAP
RoHS : Unknown | | 7
|
AP400
| Carlo Gavazzi Holding AG | Terminal Cover Accessory for CC265~ 400 family of IEC Contactors,CC Series | | 6
|
MAP40-1005
 | Bel Power Solutions | Switching Power Supplies LOW POWER SUPPLY | | 1
|
0ADAP4000-RE
| Bel Power Solutions | Fuses with Leads - Through Hole FUSE, CERAMIC TUBE 4A, 600VAC/600VDC | | 0
|
MAP40-3100
| Bel Power Solutions | Switching Power Supplies 40W +5V/3A, +12V/2A -12V/0.3A
RoHS : Not Compliant | | 0
|
MDS-100AP401 BA
| Delta Electronics Inc | Switching Power Supplies Open Frame, Medical 5.1V, 12V, +/-15V | | 0
|
NAP-40-472
| Cosel USA Inc | Power Line Filters AC 1-250 / DC250 40A 0.5mA/ 1.0mA max
RoHS : Compliant | | 0
|
MAP40-3105G
| Bel Power Solutions | Power Supply; AC-DC; Triple Output; 5V/12V/-5V 3A/2A/0.5A, 40W; Open Frame | | 0
|
MAP40-3500G
| Bel Power Solutions | Power Supply; AC-DC; 5V@5A, 12V@1A, -12V@0.3A; 90-264V In; Open Frame; MAP Series | | 0
|
CAP-40/440R
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40 MFD 370/440V ROUND CAP
RoHS : Unknown | | 0
|
CAP-40/5/440
| Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 40+5 MFD 370/440V OVAL CAP
RoHS : Unknown | | 0
|
Pasternack Enterprises US | PE7AP402-30
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 30 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-30 30 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,770.0
5 : $1,699.2
10 : $1,628.4
|
| 76
|
PE7AP402-20
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 20 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-20 20 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,660.0
5 : $1,593.6
10 : $1,527.2
|
| 27
|
PE7AP4009-20
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 20 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-20 20 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,260.0
5 : $1,234.8
10 : $1,209.6
25 : $1,184.4
|
| 22
|
PE7AP4009-30
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 30 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-30 30 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,240.0
5 : $1,215.2
10 : $1,190.4
25 : $1,165.6
|
| 19
|
PE7AP402-10
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 10 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-10 10 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,520.0
5 : $1,459.2
10 : $1,398.4
|
| 10
|
PE7AP4009-10
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 10 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-10 10 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,300.0
5 : $1,274.0
10 : $1,248.0
25 : $1,222.0
|
| 9
|
PE7AP402-3
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 3 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-3 3 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,480.0
5 : $1,420.8
10 : $1,361.6
|
| 9
|
PE7AP4009-06
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 6 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-06 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-06 6 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-06 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,280.0
5 : $1,254.4
10 : $1,228.8
25 : $1,203.2
|
| 7
|
PE7AP402-6
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 6 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-6 6 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,590.0
5 : $1,526.4
10 : $1,462.8
|
| 4
|
PE7AP4009-40
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 40 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-40 40 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,620.0
5 : $1,587.6
10 : $1,555.2
25 : $1,522.8
|
| 3
|
PE7AP4009-03
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 3 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-03 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-03 3 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-03 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $1,300.0
5 : $1,274.0
10 : $1,248.0
25 : $1,222.0
|
| 1
|
Vyrian | LAP-401DD
| ROHM Semiconductor | Smart/Normal 7 Seg Numeric LED Display, 1-Character, Orange, 10.16mm
RoHS : Compliant | | 15,030
|
NCP1200AP40G
 | onsemi | Switching Controller, Current-mode, 0.25A, 48kHz Switching Freq-Max, CMOS, PDIP8
RoHS : Compliant | | 9,780
|
NCP1200AP40
| onsemi | Switching Controller, Current-mode, 0.25A, 48kHz Switching Freq-Max, CMOS, PDIP8
RoHS : Not Compliant | | 9,205
|
KTCAP40064
| Kingston Technology Company | | | 4,274
|
ASMM-CF03-AP402
| Broadcom Limited |
RoHS : Compliant | | 3,984
|
KTC-AP400/256
| Kingston Technology Company | | | 3,035
|
KTC-AP400/128
| Kingston Technology Company | | | 2,519
|
DAP401
| ROHM Semiconductor | Rectifier Diode, 4 Element, 0.025A, 80V V(RRM), Silicon
RoHS : Not Compliant | | 686
|
Win Source Electronics | AP40T03GH
 | Advanced Power Electronics Corp | N-CHANNEL ENHANCEMENT MODE POWER MOSFET | 760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955
|
| 972
|
AP40T03GH-HF
| Advanced Power Electronics Corp | N-CHANNEL ENHANCEMENT MODE POWER MOSFET
RoHS : Compliant | 760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955
|
| 900
|
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand