 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
C-1752-R2 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
 Master Electronics | IL-AG5-C1-7500 | JAE Electronics | IL-AG5 Crimp contact skt hsg Tin plated RoHS : Compliant |
| 4,000 | |
| C1750H | Bulgin | Toggle Switches DPST Toggle Switch RoHS : Compliant |
| 1,479 | ||
| 380C1750 | Honeywell Sensing and Control | Res Conductive Plastic POT 750 Ohm 10% 2W 1(Elec)/1(Mech)Turn 6.35mm (65.07 X 27.78mm) Solder Lug Panel Mount RoHS : Compliant |
| 8 | ||
| MEC1757B-B0-I/SZ | Microchip Technology Inc | 144 WFBGA Secure Mobile Embedded Controller 96MHz CM4F with RoHS : Compliant |
| 0 | ||
| ELG-240-C1750 | Mean Well | AC/DC LED Pwr Sply - Const Curr - 239.75W - Fixd: 144 Vdc (OC) @ 1 750mA - Dim: No RoHS : Compliant |
| 0 | ||
| FSC175L-G | Thomas & Betts | SHALLOW BX 2GNG 1HUB 3/4IN RoHS : Compliant |
| 0 | ||
| ELG-240-C1750A-3Y | Mean Well | AC/DC LED Pwr Sply - Const Curr - 239.75W - Adj: 120 Vdc (OC) @ 1 750mA - Dim: No RoHS : Compliant |
| 0 | ||
| ELG-200-C1750DA | Mean Well | AC/DC LED Pwr Sply - Const Curr - 199.5W - Dim: 120 Vdc (OC) @ 1 750mA - Dim: DALI RoHS : Compliant |
| 0 | ||
| HLG-320H-C1750DA | Mean Well | 320W Constant Current LED Driver - 875 to 1750mA - DALI Conttrol RoHS : Compliant |
| 0 | ||
| CNT-P-DPX-20-P/C-175-LG | ITT Interconnect Solutions | Contact PIN Crimp ST Cable Mount T/R RoHS : Compliant |
| 0 | ||
| EMLC-(17-5X8)R-YE | Phoenix Contact | Fabric label - Roll - yellow - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - lettering field size: 17.5 x 8 mm - Number of individual labels: 2500 RoHS : Compliant |
| 0 | ||
| ELG-240-C1750AB3Y | Mean Well | Constant Current LED Driver - 240W - 1750mA - Io Pot Adjustment - 3 Way Dimming Function RoHS : Compliant |
| 0 | ||
| ELG-240-C1750DA | Mean Well | AC/DC LED Pwr Sply - Const Curr - 239.75W - Dim: 144 Vdc (OC) @ 1 750mA - Dim: DALI RoHS : Compliant |
| 0 | ||
| ELG-150-C1750A-3Y | Mean Well | AC/DC LED Power Sply - Const Curr - 149.8W - Adj: 94 Vdc (OC) @ 1 750mA - Dim: No RoHS : Compliant |
| 0 | ||
| D1G133-DC17-52 | ebm-papst | DC Blower Centrifugal Ball Bearing 48V 36V to 57V 600.4CFM 232 X 203 X 213mm RoHS : Compliant |
| 0 | ||
 Avnet Americas | 74HC175D,653 | Nexperia | Flip Flop, 74HC175, D, 30 ns, 89 MHz, 5.2 mA, 16 Pins, SOIC - Tape and Reel (Alt: 74HC175D,653) RoHS : Compliant |
| 5,000 | |
LPC1756FBD80Y | NXP Semiconductors | - Tape and Reel (Alt: LPC1756FBD80Y) RoHS : Compliant |
| 2,000 | ||
ATS-08C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT - Trays (Alt: ATS-08C-175-C2-R0) RoHS : Compliant |
| 0 | ||
| ATS-10C-175-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT - Trays (Alt: ATS-10C-175-C1-R0) RoHS : Compliant |
| 0 | ||
| HC1750-04-000 | Amphenol Corporation | B32916A5334K - Bulk (Alt: HC1750-04-000) RoHS : Compliant |
| 0 | ||
| HC1750-08-600 | Amphenol Corporation | B41456B4470M603 - Bulk (Alt: HC1750-08-600) RoHS : Compliant |
| 0 | ||
| ELG-240-C1750D2 | Mean Well | AC/DC LED Driver, 239.75 W, 137 VDC, 1.75 A, Constant Current, 100 VAC to 305 VAC, ELG-240-C Series - Boxed Product (Development Kits) (Alt: ELG-240-C1750D2) RoHS : Compliant | 0 | |||
| KBC-175 | Eaton Corporation | - Bulk (Alt: KBC-175) RoHS : Not Compliant |
| 0 | ||
| LPC1759FBD80/P1K | NXP Semiconductors | MCU 32-Bit ARM Cortex-M3 RISC 512KB Flash 3.3V 80-Pin LQFP - Trays (Alt: LPC1759FBD80/P1K) RoHS : Compliant | 0 | |||
| ATS-16C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT - Trays (Alt: ATS-16C-175-C2-R0) RoHS : Compliant |
| 0 | ||
| ATS-03C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT - Trays (Alt: ATS-03C-175-C2-R0) RoHS : Compliant |
| 0 | ||
| ELG-150-C1750D2 | Mean Well | AC/DC LED Driver, 150.5 W, 86 VDC, 1.75 A, Constant Current, 100 VAC to 305 VAC, ELG-150-C Series - Boxed Product (Development Kits) (Alt: ELG-150-C1750D2) RoHS : Compliant | 0 | |||
| ELG-240-C1750 | Mean Well | - Boxed Product (Development Kits) (Alt: ELG-240-C1750) RoHS : Compliant |
| 0 | ||
| LJT07C-17-55P014 | Amphenol Corporation | - Bulk (Alt: LJT07C-17-55P014) RoHS : Not Compliant |
| 0 | ||
| ATS-05C-175-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT - Trays (Alt: ATS-05C-175-C3-R0) RoHS : Compliant |
| 0 | ||
 Newark | MC74HC175ADR2G | onsemi | Flip Flop, D, -55 To 125Deg C; |Onsemi MC74HC175ADR2G RoHS : Compliant |
| 2,817 | |
| MC74HC175ADR2G | onsemi | Flip Flop, D, -55 To 125Deg C; |Onsemi MC74HC175ADR2G RoHS : Compliant |
| 2,817 | ||
| MC74HC175ADG | onsemi | D-Type Flip Flop, Quad, 22Ns Soic-16; |Onsemi MC74HC175ADG RoHS : Compliant |
| 309 | ||
| C1750HOAAC | Bulgin | Toggle Switch, On-Off, Dpst; |Arcolectric/bulgin Limited C1750HOAAC RoHS : Compliant |
| 303 | ||
| LPC1754FBD80,518 | NXP Semiconductors | Mcu, 32Bit, Arm Cortex-M3, 100Mhz, Lqfp; |NXP Semiconductors LPC1754FBD80,518 RoHS : Compliant |
| 240 | ||
| LPC1754FBD80,518 | NXP Semiconductors | Mcu, 32Bit, Arm Cortex-M3, 100Mhz, Lqfp; |NXP Semiconductors LPC1754FBD80,518 RoHS : Compliant |
| 240 | ||
| LTC1754ES6-5#TRMPBF | Analog Devices Inc | Dc/Dc Charge Pump Conv, Boost, Fixed; |Analog Devices, Inc. LTC1754ES6-5#TRMPBF RoHS : Compliant |
| 173 | ||
| LTC1754ES6-5#TRMPBF | Analog Devices Inc | Dc/Dc Charge Pump Conv, Boost, Fixed; |Analog Devices, Inc. LTC1754ES6-5#TRMPBF RoHS : Compliant |
| 173 | ||
CLC175US12 | XP Power | Power Supply, Ac-Dc, Medical, 12V, 13.9A; Power Supply Applications:Ite; No. Of Outputs:1 Output; Power Rating (Forced Cooling):175W @ 10Cfm; Power Rating (Convection Cooling):-; Input Voltage Vac:85V Ac To 264V Ac; Height:33Mm Rohs Compliant: Yes RoHS : Compliant |
| 156 | ||
| SC1756 | Raspberry Pi | Cm5 Development Kit, Au, Arm, Cortex-A76; |Raspberry Pi SC1756 RoHS : Compliant |
| 20 | ||
| SC1756 | Raspberry Pi | Cm5 Development Kit, Au, Arm, Cortex-A76; |Raspberry Pi SC1756 RoHS : Not Compliant |
| 20 | ||
| HIG-C175RP115H07I54L | Highland | Centrifugal Fan, 294Cfm, 53W, 230Vac; |Highland HIG-C175RP115H07I54L RoHS : Compliant |
| 8 | ||
| DC1757B | Analog Devices Inc | Demo Board, Sync Buck-Boost Converter; |Analog Devices, Inc. DC1757B RoHS : Compliant |
| 5 | ||
| CLC175US12 | XP Power | Power Supply, Ac-Dc, Medical, 12V, 13.9A; |Xp Power CLC175US12 RoHS : Compliant |
| 3 | ||
| C-175 | Bivar Inc | Led Holder, 0.312", Black, 5Mm Led; No. Of Leds:1Leds; Holder Type:Clip; Product Range:-; Accessory Type:Led Holder; External Diameter:0.312"; External Length:6.86Mm; For Use With:T-1-3/4 (5Mm) Leds; Holder Colour:Black Rohs Compliant: Yes |Bivar C-175 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | LTC1754ES6-5#TRMPBF | Analog Devices Inc | uP, Reg 3.3V/5V Ch Pump w/ SD RoHS : Compliant |
| 623 | |
| LTC1756EGN#PBF | Analog Devices Inc | Smart Card Int RoHS : Compliant |
| 319 | ||
| LTC1753CG#PBF | Analog Devices Inc | 5-B Progmable Sync Sw Reg Cntr RoHS : Compliant |
| 181 | ||
| DC1754A | Analog Devices Inc | LTC3104EDE Demo Board - 2.5V t |
| 101 | ||
| DC1753B-A | Analog Devices Inc | LTC3880EUJ Demo Board I Dual P RoHS : Compliant |
| 54 | ||
| DC1751A-E | Analog Devices Inc | LTM9007-14 Demoboard - 14-Bit, |
| 39 | ||
| DC1757B | Analog Devices Inc | LTC3789EGN Buck-Boost Demo Boa |
| 36 | ||
| DC1751A-F | Analog Devices Inc | LTM9006-14 Demoboard - 14-Bit, |
| 35 | ||
| DC1751A-C | Analog Devices Inc | LTM9009-14 Demoboard - 14-Bit, RoHS : Compliant |
| 29 | ||
| DC1759A | Analog Devices Inc | LTM4620AEV Demo Board - Dual 1 |
| 21 | ||
| LTC1753CSW#PBF | Analog Devices Inc | 5-B Progmable Sync Sw Reg Cntr RoHS : Compliant |
| 20 | ||
| DC1755A | Analog Devices Inc | LTC3860EUH Demo Board I Vin Ra RoHS : Compliant |
| 11 | ||
| DC1751A-D | Analog Devices Inc | LTM9008-14 Demoboard - 14-Bit, |
| 4 | ||
| LTC1753CSW#TRPBF | Analog Devices Inc | 5-B Progmable Sync Sw Reg Cntr RoHS : Compliant |
| 0 | ||
| LTC1750CFW#TRPBF | Analog Devices Inc | 14-B, 80Msps Wide B&width ADC RoHS : Compliant |
| 0 | ||
 RS | C-175 | Bivar Inc | LED HOLDER, PANEL MOUNT CLIP, 5 MM, BLACK POLY PROP RoHS : Compliant |
| 6,378 | |
| 2868648 (STEP-PS/ 1AC/24DC/1.75) | Phoenix Contact | POWER SUPPLY, DIN RAIL MOUNT, 24V, 1.75A, INPUT 85-264V, 42W, STEP, GEN 2 |
| 50 | ||
| CLC175US12 | XP Power | POWER SUPPLY AC-DC OPEN FRAME: 175W 12V@13.9A 85-264V IN RoHS : Compliant |
| 4 | ||
| GRLA-M5-QS-4-LF-C (175056) | Festo | FLOW CONTROL, ONE-WAY, FOR EXHAUST AIR, L, M5 MALE TO PUSH-IN CONN 4MM |
| 4 | ||
| HLG-480H-C1750A | Mean Well | POWER SUPPLY, AC-DC, LED DRIVER, 480W,1750MA137-247V ADJ CURRENT, IP65 RoHS : Compliant |
| 3 | ||
| UL PC 175/60 HT (6411919) | FIBOX | PC ENCLOSURE, 7" WIDE X 2.4" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 2 | ||
| UL PC 175/125 HG (6411322) | FIBOX | PC ENCLOSURE, 7" WIDE X 4.9" DEEP X 7" HIGH, GRAY COVER, UL 508 |
| 2 | ||
| UL PC 175/150 XHT (6413942) | FIBOX | PC ENCLOSURE, 7" WIDE X 5.9" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 2 | ||
| 2905350 (VAL-SEC-T2-2C-175-FM) | Phoenix Contact | SURGE PROTECTOR;TYPE 2;DIN RAIL; TWO PHASE;VAL-SEC-T2-2C-175-FM |
| 2 | ||
| HLG-320H-C1750B | Mean Well | POWER SUPPLY, AC-DC, LED, ENCLOSED, 320W, 91-183V OUT, 1750MA, IP67, METAL RoHS : Compliant |
| 1 | ||
| M611-HC (175603) | Brady Worldwide Inc | HARD CASE FOR M611 LABEL PRINTER |
| 1 | ||
| UL PC 175/75 HT (6411920) | FIBOX | PC ENCLOSURE, 7" WIDE X 3" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 1 | ||
| UL PC 175/100 HT (6411921) | FIBOX | PC ENCLOSURE, 7" WIDE X 4" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 1 | ||
| UL PC 175/175 XHT (6413943) | FIBOX | PC ENCLOSURE, 7" WIDE X 6.9" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 1 | ||
| UL PC 175/125 XHG (6413341) | FIBOX | PC ENCLOSURE, 7" WIDE X 4.9" DEEP X 7" HIGH, GRAY COVER, UL 508 |
| 1 | ||
 Microchip Technology Inc | MEC1753B-B0-I/SZ | Microchip Technology Inc | 144 WFBGA Secure Mobile Embedded Controller 96MHz CM4F with MPU, 8kB EEPROM, PQC, WFBGA, Projected EOL: 2051-01-20 RoHS : Compliant |
| 5,200 | |
| MEC1753B-B0-I/LJ | Microchip Technology Inc | 176 WFBGA Secure Mobile Embedded Controller 96MHz CM4F with MPU, 8kB EEPROM, PQC, WFBGA, Projected EOL: 2051-02-09 RoHS : Compliant |
| 3,864 | ||
 Bisco Industries | B1821BH050C175N | BGM Fastner | 4,555 | |||
| GSC175 | Thomas & Betts | 916 | ||||
| B1821BH025C175N | BGM Fastner | 758 | ||||
| VC-1750-16 RED | Caplugs | 275 | ||||
| GSC175NP | Thomas & Betts | 171 | ||||
| B1821BH050C175N | HEX HEAD CAP SCREWS | 159 | ||||
| LS35064A2C175 | Torco | 148 | ||||
| RC-175 | MISC KNOBS | 97 | ||||
| B1821BH038C175N | HEX HEAD CAP SCREWS | 30 | ||||
| B1821AH038C175N | HEX HEAD CAP SCREWS | 18 | ||||
| B1812BH050C175N | BGM Fastner | 6 | ||||
| 1-H-87C-175 | HEX HEAD CAP SCREWS | 1 | ||||
| B1821AH063C175N | HEX HEAD CAP SCREWS | 1 | ||||
 Rochester Electronics | 74HC175DB,112 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP Tube RoHS : Compliant |
| 1,300 | |
| LPC1754FBD80,518 | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 100MHz 80-QFP T/R RoHS : Compliant |
| 421 | ||
| 74VHC175MTC | onsemi | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP Tube RoHS : Compliant |
| 33,024 | ||
| 74VHC175MTCX | onsemi | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP T/R RoHS : Compliant |
| 2,490 | ||
| LTC1756EGN#PBF | Analog Devices Inc | IC Smart Card Analog 2.7V - 6V 16-SOP Tube RoHS : Compliant |
| 40 | ||
CD74HC175E | Texas Instruments | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDIP16 RoHS : Compliant |
| 14,445 | ||
| CD74HC175M | Texas Instruments | D Flip-Flop, HC/UH Series, 4-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 20,822 | ||
74VHC175MTC | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP Tube RoHS : Compliant |
| 66,115 | ||
| 74VHC175MTCX | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP T/R RoHS : Compliant |
| 32,442 | ||
MM74C175N | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 3.3V, 5V, 10V, 12V 16-DIP RoHS : Compliant |
| 1,675 | ||
| CD54HC175F3 | Harris Semiconductor | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-DIP RoHS : Not Compliant |
| 55 | ||
| CD74HC175E | Harris Semiconductor | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDIP16 RoHS : Compliant |
| 350 | ||
| CD74HC175M | Harris Semiconductor | D Flip-Flop, HC/UH Series, 4-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 460 | ||
| 530SC175M000DG | Skyworks Solutions Inc | Differential/single-ended; single frequency XO; OE pin 2 (pin 1 for CMOS); 10-1417 MHz RoHS : Compliant |
| 100 | ||
| 530SC175M000DGR | Skyworks Solutions Inc | Differential/single-ended; single frequency XO; OE pin 2 (pin 1 for CMOS); 10-1417 MHz RoHS : Compliant |
| 581 | ||
 Sager | ATS-08C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | |
| ATS-10C-175-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| KBC-175 | Eaton Bussmann | Specialty Fuses 600V 175A Semiconductor |
| 0 | ||
| ATS-16C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| ATS-03C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ELG-240-C1750 | Mean Well | LED Power Supplies 239.75W69-137V1750mA CC IP67 Io fixed RoHS : Compliant |
| 0 | ||
| ATS-05C-175-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-18C-175-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
| ATS-20C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| FSC175L-G | ABB Group | SHALLOW BX 2GNG 1HUB 3/4IN AL GRY |
| 0 | ||
| ELG-240-C1750A-3Y | Mean Well | LED Power Supplies 239.75W69-137V1750mA CC IP65 Io adj w/pot 3 Wire Input RoHS : Compliant |
| 0 | ||
| ATS-02C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-15C-175-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ELG-200-C1750DA | Mean Well | LED Power Supplies 199.5W57-114V 1750mA CC IP67 DALI control RoHS : Compliant |
| 0 | ||
| HLG-320H-C1750DA | Mean Well | LED Power Supplies 320.25W91-183V1750mACC IP67 DALI control RoHS : Compliant |
| 0 | ||
 TME | C1750HOAAAV | Bulgin | Switch: toggle; ON-OFF; 1700; 32.1x12.7x12.7mm; on panel |
| 862 | |
| C17542_LENINA-S-HMDS | LEDIL | C17542_LENINA-S-HMDS |
| 360 | ||
| C-175 | Bivar Inc | LED holder; 5mm; one-piece; black; LEDs; UL94V-2; L: 6.3mm RoHS : Compliant |
| 251 | ||
SN74HC175N | Texas Instruments | IC: digital; D flip-flop; Ch: 4; CMOS; THT; DIP16; HC; tube RoHS : Compliant |
| 150 | ||
| ELG-240-C1750DA | Mean Well | Power supply: switching; LED; DALI; 240W; 69÷137VDC; 1.75A; IP67 RoHS : Compliant |
| 8 | ||
| ELG-150-C1750B | Mean Well | Power supply: switching; LED; 150W; 43÷86VDC; 1750mA; 180÷295VAC RoHS : Compliant |
| 6 | ||
| ELG-150-C1750BE | Mean Well | Power supply: switching; LED; 133W; 43÷76VDC; 1750mA; 100÷305VAC RoHS : Compliant |
| 3 | ||
| DVC.1-75-60-40-M12-37-70 | Elesa+Ganter | Vibration damper; M12; Ø: 75mm; rubber; L: 40mm; Thread len: 37mm |
| 1 | ||
| CLC175US48-M | XP Power | Power supply: switching; open; 175W; 120÷370VDC; 85÷264VAC; OUT: 1 RoHS : Compliant |
| 0 | ||
| SN74HC175DBR | Texas Instruments | IC: digital; non-inverting,inverting,D flip-flop; Ch: 4; IN: 4 RoHS : Compliant |
| 0 | ||
| XW2Z-RO200C-175 | OMRON Corporation | I/O connection cable; 1.75m; Standard: Omron RoHS : Compliant |
| 0 | ||
| 74HC175D,653 | Nexperia | IC: digital; D flip-flop; Ch: 4; CMOS; SMD; SO16; HC; reel,tape RoHS : Compliant |
| 0 | ||
| CLC175US12 | XP Power | Power supply: switching; open; 175W; 120÷370VDC; 85÷264VAC; OUT: 1 RoHS : Compliant |
| 0 | ||
| ELG-200-C1750AB-3Y | Mean Well | Power supply: switching; LED; 199.5W; 57÷114VDC; 875÷1750mA; IP65 RoHS : Compliant |
| 0 | ||
| XW2Z-RI200C-175 | OMRON Corporation | I/O connection cable; 1.75m; Standard: Omron RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | SN75LBC175ADR | Texas Instruments | IC QUAD RS-485 DIFF RCVR 16-SOIC RoHS : Compliant | 124 | ||
 ComSIT USA | NJSA170FTC160C175L3 | Nichia Corporation | AVAILABLE EU | 6,797 | ||
ComSIT USA | 74HC175B1R | STMicroelectronics | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-DIP Tube RoHS : Compliant | 5,475 | ||
| 74HC175RM13TR | STMicroelectronics | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOIC T/R RoHS : Compliant | 5,000 | |||
| MC74HC175ADR2G | onsemi | D Flip-Flop, HC/UH Series, 4-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 4,310 | |||
| 74HC175MTCX | Fairchild Semiconductor Corporation | Flip Flop Positive Edge 1 Element 2.5V, 3.3V, 5V 16-SOP T/R RoHS : Compliant | 2,500 | |||
| 74HC175DR | Texas Instruments | QUADRUPLE D-TYPE FLIP-FLOP WITH CLEAR D Flip-Flop, HC Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 2,500 | |||
| 74AC175M96 | Texas Instruments | QUADRUPLE D-TYPE FLIP-FLOP WITH CLEAR D Flip-Flop, AC Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 2,000 | |||
| 75LBC175DR | Texas Instruments | QUADRUPLE LOW-POWER DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 2 Rcvr, BICMOS, PDSO16 RoHS : Compliant | 1,690 | |||
| LTC1754ES633TR | Linear Technology | MICROPOWER, REGULATED 3.3V CHARGE PUMP WITH SHUTDOWN IN SOT-23 Switched Capacitor Regulator, 600kHz Switching Freq-Max, CMOS, PDSO6 RoHS : Not Compliant | 560 | |||
| LTC1753CGPBF | Linear Technology | DC/DC Cntrlr Single-OUT Step Down 350kHz 20-Pin SSOP Tube RoHS : Compliant | 165 | |||
| LTC1756EGNPBF | Linear Technology | SMART CARD INTERFACE Interface Circuit, PDSO16 RoHS : Compliant | 73 | |||
| EVC175 | TE Connectivity | Electronic Component RoHS : Not Compliant | 36 | |||
| 74HC175N | NXP Semiconductors | QUAD D-TYPE FLIP-FLOP WITH RESET; POSITIVE-EDGE TRIGGER D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDIP16 RoHS : Not Compliant | 25 | |||
| LPC1759FBD80551 | NXP Semiconductors | Industrial | Temp (-40�C (TA) to 85�C (TA)) RoHS : Compliant | 17 | |||
| LPC1758FBD80Y | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, CMOS, PQFP80 RoHS : Compliant | 14 | |||
| XC17512LPC | AMD Xilinx | XC1700L SERIES CONFIGURATION PROM Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 10 | |||
 Interstate Connecting Components | EC1756-000 | TE Connectivity | 06262408 | 0 | ||
| LJT07C-17-55P014 | Amphenol Aerospace | RECEPT 88-539005-55P | 0 | |||
| AGC175N00001200000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL RoHS : Compliant | 0 | |||
| LJT07C-17-55SC | Amphenol Aerospace | RECEPT 87-539005-55X | 0 | |||
| LJT07C-17-55SD | Amphenol Aerospace | RECEPT 87-539005-55Z | 0 | |||
| EC1759-000 | TE Connectivity | 06262503 | 0 | |||
| LJT06C-17-55PA | Amphenol Aerospace | PLUG 87-554175-55E | 0 | |||
| LJT07C-17-55P | Amphenol Aerospace | RECEPT 87-539005-55P | 0 | |||
| LJT07C-17-55SB | Amphenol Aerospace | RECEPT 87-539005-55T | 0 | |||
| LJT06C-17-55PC | Amphenol Aerospace | PLUG 87-554175-55W | 0 | |||
| AGC175N00001115000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL | 0 | |||
| LJT07C-17-55PB | Amphenol Aerospace | RECEPT 87-539005-55R | 0 | |||
| AGC175N00001100000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL | 0 | |||
| EC1750-000 | TE Connectivity | 06262402 | 0 | |||
| AGC175N00001215000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL RoHS : Compliant | 0 | |||
 NexGen Digital | XC17512LPC | AMD Xilinx | 6 | |||
 PEI Genesis | SE7F1807C1.75-34ES | SOURIAU-SUNBANK |
| 0 | ||
| SE7F0903C1.75-34ES | SOURIAU-SUNBANK |
| 0 | |||
| SE7F2508C1.75-34ES | SOURIAU-SUNBANK |
| 0 | |||
| SE7F1504C1.75-34ES | SOURIAU-SUNBANK |
| 0 | |||
| SE9C0704C1.75-34 | SOURIAU-SUNBANK |
| 0 | |||
| GA801KK1C175C5 | SOURIAU-SUNBANK |
| 0 | |||
| SE7F1805C1.75-34ES | SOURIAU-SUNBANK |
| 0 | |||
| GA801PU1C175C | SOURIAU-SUNBANK |
| 0 | |||
| SE6FM7212C1.75-34 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | C-175 | Bivar Inc | LED Holder, Panel Mount Clip, 5 mm, Blac RoHS : Compliant |
| 12,149 | |
| TR11-C-X-63-B-1-C-1.75A | Altech Corporation | TR11 sup. prot.,cent.mou.,bl. |
| 904 | ||
 Richardson RFPD | 530SC175M000DGR | Skyworks Solutions Inc | Oscillator XO 175MHz ±20ppm LVDS 55% 2.5V 6-Pin SM RoHS : Compliant |
| 0 | |
| DC1751A-F | Analog Devices Inc | LTM9006-14 Demo board RoHS : Compliant |
| 0 | ||
| DC1751A-D | Analog Devices Inc | LTM9008-14 Demo board RoHS : Compliant |
| 0 | ||
| 530SC175M000DG | Skyworks Solutions Inc | Oscillator XO 175MHz ±20ppm LVDS 55% 2.5V 6-Pin SM RoHS : Compliant |
| 0 | ||
| 530AC175M000DG | Skyworks Solutions Inc | Oscillator XO 175MHz ±20ppm LVPECL 55% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| LTC1753CSW#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 350kHz 20-Pin SO RoHS : Compliant |
| 0 | ||
| LTC1756EGN#PBF | Analog Devices Inc | Smart Card Interface 3.3V/5V Tube 16-Pin SSOP N RoHS : Compliant |
| 0 | ||
| LTC1750CFW#TRPBF | Analog Devices Inc | 1-Channel Single ADC Pipelined 80Msps 14-bit Paral RoHS : Compliant |
| 0 | ||
| DC1751A-E | Analog Devices Inc | LTM9007-14 Demonstration Circuit RoHS : Compliant |
| 0 | ||
| DC1759A | Analog Devices Inc | LTM4620A DC to DC Converter and Switching Regulato RoHS : Compliant |
| 0 | ||
| LTC1754ES6-5#TRMPBF | Analog Devices Inc | Charge Pump STPUP 5V 50mA 6-Pin TSOT-23 T/R RoHS : Compliant |
| 0 | ||
| 103350-HMC175MS8 | Analog Devices Inc | HMC175MS8 Up-Down Converter and Mixer Evaluation B RoHS : Compliant | 0 | |||
| RDM-PB0-MB3C175141J3G001 | Raltron Electronics Corporation | Antenna GPS/GSM 1dBi Gain 960MHz/2170MHz RoHS : Compliant | 0 | |||
| LTC1753CG#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 350kHz 20-Pin SS RoHS : Compliant |
| 0 | ||
| DC1753B-A | Analog Devices Inc | LTC3880EUJ Demo Board RoHS : Compliant |
| 0 | ||
 Rutronik | IL-AG5-C1-7500 | JAE Electronics | Crimp Contact Socket AWG 22-18 RoHS : Compliant |
| 585,000 | |
 Chip 1 Exchange | SN74HC175D | Texas Instruments | INSTOCK RoHS : Compliant | 8,285 | ||
| 74HC175 | INSTOCK | 2,100 | ||||
| SN74HC175DR | INSTOCK | 2,100 | ||||
| M74HC175RM13TR | INSTOCK | 1,888 | ||||
| UPD7508HC175 | NECEL | INSTOCK | 1,462 | |||
| WSC-1-.75-1%TR-1K | INSTOCK | 1,000 | ||||
| CD74HC175E | Harris Semiconductor | INSTOCK RoHS : Not Compliant | 600 | |||
| CD74HC175E | INSTOCK | 600 | ||||
| UPD7508HC-175 | NECEL | INSTOCK | 561 | |||
| SN74HC175D | INSTOCK | 245 | ||||
| UPD7508HC175 | INSTOCK | 245 | ||||
| PC74HC175P | INSTOCK | 200 | ||||
| MM74HC175M | INSTOCK | 120 | ||||
| MM74HC175M | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 48 | |||
| WARC175BD | INSTOCK | 12 | ||||
 Avnet Abacus | CLC175US12 | XP Power | ACDC Open Frame Power Supply PSU ITE 1 Output 175W 10CFM 85V AC to 264V AC (Alt: CLC175US12) RoHS : Compliant | 0 | ||
| EC1756-000 | TE Connectivity | (Alt: EC1756-000) RoHS : Compliant | 0 | |||
| EC1759-000 | TE Connectivity | (Alt: EC1759-000) RoHS : Compliant | 0 | |||
| EC1750-000 | TE Connectivity | (Alt: EC1750-000) RoHS : Compliant | 0 | |||
| EC1753-000 | TE Connectivity | (Alt: EC1753-000) RoHS : Compliant | 0 | |||
| C1750HOAAAV | Bulgin | (Alt: C1750HOAAAV) RoHS : Compliant | 0 | |||
| AGC-175-1000-R | Eaton Corporation | Fuse Cartridge Fast Acting 175 mA 63mm x 32mm 14 x 114 AGC (Alt: AGC-175-1000-R) RoHS : Compliant | 0 | |||
| VDRS05C175BSE | Vishay Intertechnologies | TVS Varistor 175 VAC 225 VDC VDRS 455 V Disc Radial Leaded 7 mm Metal Oxide Varistor MOV (Alt: VDRS05C175BSE) RoHS : Compliant | 0 | |||
| VDRS05C175ASE | Vishay Intertechnologies | TVS Varistor 175 VAC 225 VDC VDRS 455 V Disc Radial Leaded 7 mm Metal Oxide Varistor MOV (Alt: VDRS05C175ASE) RoHS : Compliant | 0 | |||
| VDRS05C175THE | Vishay Intertechnologies | (Alt: VDRS05C175THE) RoHS : Compliant | 0 | |||
| VDRS05C175BKE | Vishay Intertechnologies | TVS Varistor 175 VAC 225 VDC VDRS 455 V Disc Radial Leaded 7 mm Metal Oxide Varistor MOV (Alt: VDRS05C175BKE) RoHS : Compliant | 0 | |||
| VDRS05C175AME | Vishay Intertechnologies | TVS Varistor 175 VAC 225 VDC VDRS 455 V Disc Radial Leaded 7 mm Metal Oxide Varistor MOV (Alt: VDRS05C175AME) RoHS : Compliant | 0 | |||
| VDRS05C175TLE | Vishay Intertechnologies | TVS Varistor 175 VAC 225 VDC VDRS 455 V Disc Radial Leaded 7 mm Metal Oxide Varistor MOV (Alt: VDRS05C175TLE) RoHS : Compliant | 0 | |||
| LJTNSMC175014 | Amphenol Corporation | BENLJTNSMC175014 (Alt: LJTNSMC175014) RoHS : Not Compliant | 0 | |||
| R79MC1750DQ40G | KEMET Corporation | Film Capacitor 7500 pF 200 V 400 V 2 Metallized PP Radial Box 2 Pin (Alt: R79MC1750DQ40G) RoHS : Compliant | 0 | |||
Avnet Asia | MC74HC175ADTR2G-Q | onsemi | (Alt: MC74HC175ADTR2G-Q) RoHS : Compliant | 0 | ||
| 74HC175D,653 | Nexperia | Flip Flop, 74HC175, D, 30 ns, 89 MHz, 5.2 mA, 16 Pins, SOIC (Alt: 74HC175D,653) RoHS : Compliant | 0 | |||
| SC1754C-H082-TL | Power Integrations | 27W FLYBACK SWITCHER IC (Alt: SC1754C-H082-TL) RoHS : Compliant | 0 | |||
| MM74HC175MX | onsemi | (Alt: MM74HC175MX) RoHS : Compliant | 0 | |||
 Avnet Silica | LPC1754FBD80,518 | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 128 KB (Alt: LPC1754FBD80,518) RoHS : Compliant | 15,000 | ||
| LPC1758FBD80K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 512 KB (Alt: LPC1758FBD80K) RoHS : Compliant | 13,090 | |||
| LPC1756FBD80K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 256 KB (Alt: LPC1756FBD80K) RoHS : Compliant | 3,570 | |||
| MM74HC175MX | onsemi | FlipFlop Complementary Output Positive Edge 74HC175 D 15 ns 70 MHz NSOIC (Alt: MM74HC175MX) RoHS : Compliant | 2,500 | |||
| LPC1754FBD80K | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 100 MHz 128 Kilobytes 32 Kilobytes 80 Pins LQFP (Alt: LPC1754FBD80K) RoHS : Compliant | 1,785 | |||
| C17543_LENINA-M-HMDS | LEDIL | Reflector 30 Medium Beam PC Metal HMDS Coating 74mm x 40mm Box (Alt: C17543_LENINA-M-HMDS) RoHS : Compliant | 1,680 | |||
| 74HC175D,653 | Nexperia | Flip Flop 74HC175 D 30 ns 89 MHz 52 mA 16 Pins SOIC (Alt: 74HC175D,653) RoHS : Compliant | 0 | |||
| 74VHC175MTCX | onsemi | Quad DType FlipFlop ONSSPCLGC (Alt: 74VHC175MTCX) RoHS : Compliant | 0 | |||
| MM74HC175MTCX | onsemi | Quad DType FlipFlop with Clear ONSSPCLGC (Alt: MM74HC175MTCX) RoHS : Compliant | 0 | |||
| LPC1759FBD80/P1K | NXP Semiconductors | (Alt: LPC1759FBD80/P1K) RoHS : Compliant | 0 | |||
| C17538_DAISY-7X1-O | LEDIL | Linear Lens for LUXEON 5050 Square LESDuris S8OSCONIQ S 5050LH181B Series LEDs PMMA Box (Alt: C17538_DAISY-7X1-O) RoHS : Compliant | 0 | |||
| C17542_LENINA-S-HMDS | LEDIL | Reflector 19 Spot Beam Polycarbonate for LED Lighting (Alt: C17542_LENINA-S-HMDS) RoHS : Compliant | 0 | |||
| C17544_LENINA-W-HMDS | LEDIL | LENINAHMDSseriesType ReflectorMaterial PCColor MetalCoating HMDS (Alt: C17544_LENINA-W-HMDS) RoHS : Compliant | 0 | |||
| C17580_STRADA-2X2-SHD-WHT | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate White (Alt: C17580_STRADA-2X2-SHD-WHT) RoHS : Compliant | 0 | |||
| C17533_DAISY-7X1-SHD-MET-MATT | LEDIL | SHADERECTANG7 POS2795 X 400MM D2 (Alt: C17533_DAISY-7X1-SHD-MET-MATT) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | MM74HC175N | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,763 | |
| MBB0207-25-0.1%-C1-75R | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 930 | ||
| MC74HC175ADR2 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 500 | ||
| SN74HC175D | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 458 | ||
LTC1751EMS8-5#TRPBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| CD74HC175E | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| MM74C175N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| MM74HC175M | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| TC74HC175AP | Toshiba America Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
SN65LBC175D | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| PVC175-100M-10% | PFR | IN STOCK SHIP TODAY | 5 | |||
| MM74HC175N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| EFSC1751523C | APLETON | IN STOCK SHIP TODAY |
| 3 | ||
| D1G133-DC17-52 | ebm-papst | IN STOCK SHIP TODAY | 1 | |||
| COBNC17-59M | B&L Engineering | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | SC175020A | Essentra Components | ROUND END CAPSILICON NATURAL | 0 | ||
| KN4C17505S4--21 | Essentra Components | CLAMPING STAR KNOB 2.250 IN DI | 0 | |||
| KN4C17503P4--21 | Essentra Components | CLAMPING 3 ARM KNOB 1.750 IN D | 0 | |||
| SC175020B | Essentra Components | ROUND END CAPEPDM BLACK | 0 | |||
| KN5C1750F4---21 | Essentra Components | CLAMPING FLUTED KNOB 1.750 IN | 0 | |||
| KN5C1750F7S--21 | Essentra Components | CLAMPING FLUTED KNOB 2.500 IN | 0 | |||
| KN5C1750R5--S21 | Essentra Components | CLAMPING STAR KNOB 1.890 IN DI | 0 | |||
| KN5C1750F6---21 | Essentra Components | CLAMPING FLUTED KNOB 2.380 IN | 0 | |||
| SC175020 | Essentra Components | ROUND END CAPSILICONE YELLOW | 0 | |||
| KN4C1750F6---21 | Essentra Components | CLAMPING FLUTED KNOB 2.380 IN | 0 | |||
| KN4C1750F4---21 | Essentra Components | CLAMPING FLUTED KNOB 1.750 IN | 0 | |||
| SC1750 | Shercon Inc | ULTRABAKE CAP (600F) M25 | 0 | |||
| KN5C17503P4--21 | Essentra Components | CLAMPING 3 ARM KNOB 1.750 IN D | 0 | |||
 EBV Elektronik | LPC1758FBD80Y | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 512 KB (Alt: LPC1758FBD80Y) RoHS : Compliant | 27,000 | ||
| LPC1759FBD80K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 512 KB (Alt: LPC1759FBD80K) RoHS : Compliant | 10,710 | |||
| LPC1756FBD80Y | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 256 KB (Alt: LPC1756FBD80Y) RoHS : Compliant | 8,000 | |||
| ALS-PDIC17-55C/TR8 | Everlight Electronics Co Ltd | (Alt: 3617550050) RoHS : Compliant | 6,000 | |||
| C17580_STRADA-2X2-SHD-WHT | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate White (Alt: C17580_STRADA-2X2-SHD-WHT) RoHS : Compliant | 4,460 | |||
| LPC1756FBD80K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 256 KB (Alt: LPC1756FBD80K) RoHS : Compliant | 2,975 | |||
| 74VHC175MTCX | onsemi | Quad DType FlipFlop ONSSPCLGC (Alt: 74VHC175MTCX) RoHS : Compliant | 0 | |||
| MM74HC175MTCX | onsemi | Quad DType FlipFlop with Clear ONSSPCLGC (Alt: MM74HC175MTCX) RoHS : Compliant | 0 | |||
| MC74HC175ADR2G | onsemi | Quad D FlipFlop with Common Clock and Reset ONSSPCLGC (Alt: MC74HC175ADR2G) RoHS : Compliant | 0 | |||
| MC74HC175ADTR2G | onsemi | Quad D FlipFlop with Common Clock and Reset ONSSPCLGC (Alt: MC74HC175ADTR2G) RoHS : Compliant | 0 | |||
| LPC1759FBD80/P1K | NXP Semiconductors | (Alt: LPC1759FBD80/P1K) RoHS : Compliant | 0 | |||
| LPC1754FBD80,518 | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 128 KB (Alt: LPC1754FBD80,518) RoHS : Compliant | 0 | |||
| C17538_DAISY-7X1-O | LEDIL | Linear Lens for LUXEON 5050 Square LESDuris S8OSCONIQ S 5050LH181B Series LEDs PMMA Box (Alt: C17538_DAISY-7X1-O) RoHS : Compliant | 0 | |||
| GWKAFHB9.KM-C17-50S3-270-T05 | ams OSRAM Group | (Alt: Q65115A1882) RoHS : Compliant | 0 | |||
| C17533_DAISY-7X1-SHD-MET-MATT | LEDIL | SHADERECTANG7 POS2795 X 400MM D2 (Alt: C17533_DAISY-7X1-SHD-MET-MATT) RoHS : Compliant | 0 | |||
 FDH Electronics | GSC175NP | Thomas & Betts | Terminals & Spl |
| 1 | |
| SE9C0704C1.75-34 | SOURIAU-SUNBANK | Backshells & Ac | 1 | |||
| GSC175 | Thomas & Betts | Harness Mgmt | 0 | |||
 Flip Electronics | MM74HC175M | onsemi | Stock, Ship Today RoHS : Compliant |
| 66,288 | |
| 74VHC175MTC | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,898 | ||
| NLV74HC175ADTR2G | onsemi | Stock RoHS : Compliant | 22,500 | |||
| 74VHC175SJ | onsemi | Stock | 22,000 | |||
| MPC17531ATEPR2 | NXP Semiconductors | Stock RoHS : Compliant | 5,000 | |||
| MPC17511EP | NXP Semiconductors | Stock RoHS : Compliant | 3,920 | |||
| MC74HC175ADG | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,312 | ||
| MM74HC175MTCX | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
| 74VHC175MTCX | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
| LPC1758FBD80Y | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,694 | ||
| LPC1758FBD80/P1K | NXP Semiconductors | Stock RoHS : Compliant | 595 | |||
LPC1756FBD80 | NXP Semiconductors | Stock RoHS : Compliant | 215 | |||
| LPC1758FBD80 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 199 | ||
| LPC1759FBD80,551 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 162 | ||
| MPC17529EJ | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 25 | ||
 Maritex | LPC1759FBD80K | NXP Semiconductors | Microcontrollers (MCU); LPC1759FBD80K; NXP SEMICONDUCTORS RoHS : Compliant |
| 1,165 | |
| MC74HC175ADR2G | onsemi | Flip Flops; MC74HC175ADR2G; ON SEMICONDUCTOR; 16; 4; 225 ns; 2 V RoHS : Compliant |
| 920 | ||
| ELG-150-C1750DA3Y | Mean Well | Power supply; LED; DALI; 150W; 43-86V; 1750mA; 142-431VDC; IP67 |
| 15 | ||
| HLG-320H-C1750B | Mean Well | Power Supply; LED; dimming; 320.25W; 91-183V; 1750mA; 90-305VAC; 127-417VDC; IP67 RoHS : Compliant |
| 2 | ||
 Neutron USA | HLG-240H-C1750B | Mean Well | LED Power Supplies 250.25W71-143V1750mA IP67 CC 3 in 1 Dim RoHS : Compliant |
| 48 | |
| HLG-480H-C1750A | Mean Well | Power Supply; LED Driver; 480W, 1750mA137-247V Adj Current; IP65 RoHS : Compliant |
| 9 | ||
| ELG-240-C1750DA | Mean Well | LED Power Supplies 239.75W69-137V1750mA CC IP67 DALI control RoHS : Compliant |
| 4 | ||
| FM20C175Q | AMETEK Inc | Air Flow Meter; Analog; 2-in - 11.5 NPSC; 35-175 SCFM Flow Range; 2% Accuracy |
| 2 | ||
| ELG-200-C1750 | Mean Well | LED Power Supplies 199.5W57-114V 1750mA CC IP67 Io fixed RoHS : Compliant |
| 2 | ||
| ELG-200-C1750B | Mean Well | LED Power Supplies 199.5W57-114V 1750mA CC IP67 3in1 Dimming RoHS : Compliant |
| 2 | ||
| XW2Z-RO200C-175-MN | OMRON Corporation | Mitsubishi Electric PLC Connecting Cable, for 32 output points P.L.C., Connectors: 1:2, 40p/20p, 2m/1.75m RoHS : Compliant |
| 2 | ||
| ELG-240-C1750 | Mean Well | LED Power Supplies 239.75W69-137V1750mA CC IP67 Io fixed RoHS : Compliant |
| 0 | ||
| ELG-200-C1750DA | Mean Well | LED Power Supplies 199.5W57-114V 1750mA CC IP67 DALI control RoHS : Compliant |
| 0 | ||
| HLG-240H-C1750A | Mean Well | LED Power Supply CC 250.25W 71-143V 1750mA, PFC, IP65, Io Adj by Potmeter, Metal H Wire Leads, Input: 90 ~ 305VAC RoHS : Compliant |
| 0 | ||
| HLG-320H-C1750B | Mean Well | Power Supply: LED; Enclosed; 320W; 91-183V Out; 1750mA; IP67; Metal RoHS : Compliant |
| 0 | ||
| CLC175US12 | XP Power | Power Supply: AC-DC; Open Frame: 175W; 12V@13.9A; 85-264V In RoHS : Compliant |
| 0 | ||
| ELG-150-C1750B | Mean Well | LED Power Supplies 150.5W 1750mA 94V IP67 CC dimming RoHS : Compliant |
| 0 | ||
| ELG-200-C1750A | Mean Well | LED Power Supplies 199.5W57-114V 1750mA CC IP65 Io adj w/pot RoHS : Compliant |
| 0 | ||
| HLG-480H-C1750B | Mean Well | Power Supply LED Driver CC 480W 137~274V 1750mA, PFC, IP67, Dimming with 0-10VDC PWM Resistance, Input; 90 ~ 305VAC RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C1754LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 cm Length Using LMR-200-UF Coax With Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1754LF/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1754LF/HS-200CM is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder. |
| 251 | |
| PE3C1754LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax With Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1754LF/HS-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1754LF/HS-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder. |
| 162 | ||
| PE3C1754-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1754-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1754-24 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C1754-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 135 | ||
| PE3C1754-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-200-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1754-300 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1754-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C1754-300 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 45 | ||
| PE3C1756/HS/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-SR405FLJ Coax with HeatShrink and 90 Deg. Clock. PE3C1756/HS/PH90 is a MMCX plug right angle to MMCX plug right angle cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1756/HS/PH90 MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C1758-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Reverse Polarity SMA Jack Bulkhead to Reverse Polarity TNC Plug Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA bulkhead cable connection on one end and a reverse polarity TNC cable connection on the other. Our low loss reverse polarity SMA to reverse polarity TNC cable assembly has a jack gender on end 1 and a plug on end 2. PE3C1758-200CM can also be known as a low loss reverse polarity SMA female to reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1758-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMA jack to TNC plug cable has a maximum VSWR of 1.4:1. Reverse polarity SMA female to reverse polarity TNC male cable assembly PE3C1758-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1758-200CM can also be used in the other direction and will be a reverse polarity TNC plug to reverse polarity SMA jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity female bulkhead to TNC reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1751/HS2 | Pasternack Enterprises | 0 | ||||
| PE3C1751LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using LMR-100 Coax with HeatShrink, RoHS. PE3C1751LF/HS is a SMA male to MCX plug cable using LMR-100A coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1751LF/HS SMA male to MCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1758-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Jack Bulkhead to Reverse Polarity TNC Plug Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA bulkhead cable connection on one end and a reverse polarity TNC cable connection on the other. Our low loss reverse polarity SMA to reverse polarity TNC cable assembly has a jack gender on end 1 and a plug on end 2. PE3C1758-48 can also be known as a low loss reverse polarity SMA female to reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1758-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMA jack to TNC plug cable has a maximum VSWR of 1.4:1. Reverse polarity SMA female to reverse polarity TNC male cable assembly PE3C1758-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1758-48 can also be used in the other direction and will be a reverse polarity TNC plug to reverse polarity SMA jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity female bulkhead to TNC reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1751-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to MCX Plug Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to MCX plug low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MCX plug low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our low loss a SMA to a MCX cable assembly has male gender on end 1 and plug on end 2. PE3C1751-200CM can also be known as a low loss SMA plug to MCX male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1751-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MCX male cable assembly PE3C1751-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1751-200CM can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1752LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using LMR-200 Coax, LF Solder, RoHS. PE3C1752LF is a N male to SMA male right angle cable using LMR-200 coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1752LF N male to SMA male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1751-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MCX Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to MCX plug low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MCX plug low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our low loss a SMA to a MCX cable assembly has male gender on end 1 and plug on end 2. PE3C1751-36 can also be known as a low loss SMA plug to MCX male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1751-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MCX male cable assembly PE3C1751-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1751-36 can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1755 | Pasternack Enterprises | 0 | ||||
| PE3C1752 | Pasternack Enterprises | 0 | ||||
| PE3C1758-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Reverse Polarity SMA Jack Bulkhead to Reverse Polarity TNC Plug Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA jack bulkhead to reverse polarity TNC plug low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA bulkhead cable connection on one end and a reverse polarity TNC cable connection on the other. Our low loss reverse polarity SMA to reverse polarity TNC cable assembly has a jack gender on end 1 and a plug on end 2. PE3C1758-100CM can also be known as a low loss reverse polarity SMA female to reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1758-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMA jack to TNC plug cable has a maximum VSWR of 1.4:1. Reverse polarity SMA female to reverse polarity TNC male cable assembly PE3C1758-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1758-100CM can also be used in the other direction and will be a reverse polarity TNC plug to reverse polarity SMA jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity female bulkhead to TNC reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | 74HC175DB,118 | Nexperia | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 13,755 | ||
| 74HC175DB,112 | Nexperia | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 12,051 | |||
| DC1751A-D | Analog Devices Inc | 11,154 | ||||
| DC1751A-F | Analog Devices Inc | 9,474 | ||||
| MM54HC175E/883 | National Semiconductor Corporation | D Flip-Flop, 4-Func, Positive Edge Triggered, CMOS, CQCC20 RoHS : Not Compliant | 8,192 | |||
| LTC1753CG-PBF | Analog Devices Inc | 7,608 | ||||
| SN74HC175PWRE4 | Texas Instruments | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 7,362 | |||
| CD74AC175NSRE4 | Texas Instruments | D Flip-Flop, AC Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 6,561 | |||
SN55LBC175FK | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, BICMOS, CQCC20 | 5,371 | |||
| LTC1758-2EMS | Analog Devices Inc | Telecom Circuit, 1-Func, PDSO10 RoHS : Not Compliant | 5,194 | |||
| 74HC175PW | Nexperia | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 4,739 | |||
| CD74HC175MTG4 | Texas Instruments | D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant | 4,546 | |||
| M74HC175RM13TR | STMicroelectronics | RoHS : Not Compliant | 3,855 | |||
| DBTC-17-5L | Mini-circuits | Directional Coupler, 50MHz Min, 2000MHz Max, 1.6dB Insertion Loss-Max | 852 | |||
| LPC1751FBD80 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, CMOS, PQFP80 RoHS : Compliant | 625 | |||
 Win Source Electronics | SN74HC175DR | Texas Instruments | Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin SOIC T/R / IC D-TYPE POS TRG SNGL 16SOIC RoHS : Compliant |
| 32,500 | |
| 74VHC175MTC | Fairchild Semiconductor Corporation | IC D-TYPE POS TRG SNGL 16TSSOP RoHS : Compliant |
| 30,000 | ||
| LPC1756FBD80 | Nexperia | IC MCU 32BIT 256KB FLASH 80LQFP |
| 29,995 | ||
| SN74HC175DRG4 | Texas Instruments | QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR RoHS : Compliant |
| 29,660 | ||
| LPC1758FBD80551 | Nexperia |
| 8,000 | |||
| LPC1751FBD80 | Nexperia | 32-bit ARM Cortex-M3 microcontroller; |
| 6,000 | ||
LTC1754ES6-5#TRMPBF | Linear Technology | IC REG SWTCHD CAP 5V 50MA SOT23 RoHS : Compliant |
| 6,000 | ||
| LPC1758FBD80 | Nexperia | IC MCU 32BIT 512KB FLASH 80LQFP |
| 5,950 | ||
| 74HC175D+652 | Nexperia |
| 5,630 | |||
| LTC1754ES6-3.3#TRPBF | Linear Technology | IC REG SWITCHD CAP 3.3V SOT23 RoHS : Compliant |
| 5,030 | ||
| 74VHC175MTCX | Fairchild Semiconductor Corporation | IC D-TYPE POS TRG SNGL 16TSSOP RoHS : Compliant |
| 5,000 | ||
| LPC1759FBD80 | Nexperia | IC MCU 32BIT 512KB FLASH 80LQFP |
| 4,699 | ||
| LTC1754ES6-5#TRPBF | Linear Technology | IC REG SWTCHD CAP 5V 50MA SOT23 RoHS : Compliant |
| 2,275 | ||
SN65LBC175AD | Texas Instruments | IC DIFF LINE RCVR QUAD LP 16SOIC RoHS : Compliant |
| 1,087 | ||
| LPC1754FBD80K | Nexperia | IC MCU 32BIT 128KB FLASH 80LQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 100MHz 128KB (128K x 8) FLASH 80-LQFP (12x12) |
| 391 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand