C56L-AF5-R Price, Reseller, Stock

Streamlined looks and easy operation make this compression latch an ideal choice for highly visible installations requiring a secure sealed fit. Compressive action pulls door tight without rubbing action or wear on pawl or frame.

C5-63-25

Southco

C5-63-35-3

Southco

Southco

Southco

Southco

Southco

Southco

Southco

S1C-56S

GRIPCO STANLEY

C5-61-312

Southco

EBV Elektronik

SPC5606SF2VLQ6R

NXP Semiconductors

MCU 32bit MPC56xx e200 RISC 1024KB Flash 33V5V 144Pin LQFP TR (Alt: SPC5606SF2VLQ6R)
RoHS : Compliant

21,500

MC56F8323VFBE

NXP Semiconductors

Digital Signal Controller MC56F83xx 60 MHz 32 KB 27 IOs CAN SCI SPI 25 V (Alt: MC56F8323VFBE)
RoHS : Compliant

14,400

MC56F8037VLH

NXP Semiconductors

Digital Signal Controller MC56F80xx 32 MHz 64 KB 53 IOs CAN I2C SCI SPI 25 V (Alt: MC56F8037VLH)
RoHS : Compliant

12,000

1.5SMC56A-E3/9AT

Vishay Intertechnologies

(Alt: 1.5SMC56A-E3/9AT)
RoHS : Compliant

10,500

CY8C5667LTI-LP041

Infineon Technologies AG

PSoC 5LP RISC 32Bit 67MHz 18V25V33V5V 68Pin QFN Tray (Alt: SP005655411)
RoHS : Compliant

7,800

SPC5604BF2MLL6

NXP Semiconductors

32 Bit Microcontroller MPC5 Family MPC56xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5604BF2MLL6)
RoHS : Compliant

4,230

SPC560D30L1B4E0X

STMicroelectronics

MCU 32Bit SPC560D30x e200z0h RISC 256KB Flash 33V5V 64Pin LQFP TR (Alt: SPC560D30L1B4E0X)
RoHS : Compliant

4,000

SPC5673FF3MVR3

NXP Semiconductors

(Alt: SPC5673FF3MVR3)
RoHS : Compliant

3,640

MC56F8355VFGE

NXP Semiconductors

MCU 16bit MC56F83xx CISC 256KB Flash 33V 128Pin LQFP Tray (Alt: MC56F8355VFGE)
RoHS : Compliant

2,016

MC56F8013VFAE

NXP Semiconductors

Digital Signal Controller MC56F80xx 32 MHz 16 KB 26 IOs I2C SCI SPI 33 V (Alt: MC56F8013VFAE)
RoHS : Compliant

1,000

SPC5644AF0MMG1R

NXP Semiconductors

32bit MCU PowerPC e200Z4 150 MHz 4 MB 192 KB 208 Pins MAPBGA (Alt: SPC5644AF0MMG1R)
RoHS : Compliant

1,000

MC56F82733MFM

NXP Semiconductors

Digital Signal Controllers 32bit 100 MHz 48 KB 8 KB 32 Pins QFN (Alt: MC56F82733MFM)
RoHS : Compliant

980

SPC5674FF3MVV3R

NXP Semiconductors

MCU 32bit MPC56xx e200 RISC 4096KB Flash 12V33V5V 516Pin TEBGA TR (Alt: SPC5674FF3MVV3R)
RoHS : Not Compliant

500

MC56F8335VFGE

NXP Semiconductors

MCU 16bit MC56F83xx CISC 64KB Flash 33V 128Pin LQFP Tray (Alt: MC56F8335VFGE)
RoHS : Compliant

288

SPC560B50L5C6E0Y

STMicroelectronics

MCU 32Bit SPC560B50x e200z0h RISC 512KB Flash 33V5V 144Pin LQFP Tray (Alt: SPC560B50L5C6E0Y)
RoHS : Compliant

240

FDH Electronics

SS-H-C5-6

SUMITOMO ELECTRIC Industries Ltd

Harness Mgmt

900

VC-562-16 FR/UL

Caplugs

Connector Acc

508

RLR07C5602GS

Vishay Intertechnologies

Other Products
RoHS : Not Compliant

133

MS24694-C56

The Monroe Cable Company

Intro Placehldr

100

MBA02040C5601FC100

Vishay Semiconductors

Miscellaneous

1 : $0.246
5 : $0.246
10 : $0.209
25 : $0.159
50 : $0.159
100 : $0.147
250 : $0.143
500 : $0.143
1,000 : $0.143
2,500 : $0.143
10,000 : $0.143

RLR07C5620FS

Vishay Dale

Other Products
RoHS : Not Compliant

1 : $2.2
5 : $2.2
10 : $1.872
25 : $1.419
50 : $1.419
100 : $1.313
250 : $1.275
500 : $1.275
1,000 : $1.275
2,500 : $1.275
10,000 : $1.275

RNR60C5621FS

Vishay Intertechnologies

Other Products
RoHS : Not Compliant

RLR20C56R0GS

TT Electronics Resistors

Resistor
RoHS : Not Compliant

H-C5-6

SUMITOMO ELECTRIC Industries Ltd

Harness Mgmt

RLR07C56R0GS

Vishay Intertechnologies

Other Products
RoHS : Not Compliant

VC-562-8 FR/UL

Caplugs

Connector Acc

PC 560079

FDH Electronics

Wire Placehldr

VC-562-8 (BLACK)

Caplugs

Connector Acc

1 : $0.311
5 : $0.311
10 : $0.274
25 : $0.259
50 : $0.259
100 : $0.25
250 : $0.241
500 : $0.241
1,000 : $0.233
2,500 : $0.233
10,000 : $0.225

MS17344R40C56S

Amphenol Aerospace

Connector Misc

Flip Electronics

SZBZX84C56LT1G

onsemi

Stock, Ship Today
RoHS : Compliant

48,000

SPC5603BK0VLL4

NXP Semiconductors

Stock
RoHS : Compliant

9,720

MC56F82643VLC

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $2.73

8,015

MC56F83786MLK

NXP Semiconductors

Stock
RoHS : Compliant

6,720

MC56F8357VPYE

NXP Semiconductors

Stock
RoHS : Compliant

4,884

MC56F8357MPYE

NXP Semiconductors

Stock
RoHS : Compliant

4,800

MC56F82728VLH

NXP Semiconductors

Stock
RoHS : Compliant

4,629

SPC5604PEF1MLQ6R

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $15.33

4,500

MC56F8006VLF

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $6.28

2,285

MC56F8257VLH

NXP Semiconductors

Stock
RoHS : Compliant

1,816

SPC5643LK0MLQ8

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $22.24

1,533

KC56F8256VLF

NXP Semiconductors

Stock

1,250

SPC5602DF1MLH4

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $13.06

1,048

SPC5645CCF0VLU8

NXP Semiconductors

Stock, Ship Today

1 : $40.62

920

MPC560SKIT144S

NXP Semiconductors

Stock

Maritex

PC56H19 V2 3000K 3-STEP

Lextar Electronics Corporation

LED mid-power; SMD; 5630 PLCC4; warm white; 3000K; 28-38lm/65mA; 2.5-3.0V; diffused; 120 degrees; 5.6x3.0x0.6mm

2,000 : $0.056
1,000 : $0.063
500 : $0.076
100 : $0.076
1 : $0.081

12,191

PC56H19 V1 CIE:30A MIN. H1 ZENER

Lextar Electronics Corporation

LED 5630; Lextar; warm white 3000K (3-step); H1-I1 31.5-38lm/65mA; 2.5-3.0V CRI min 80; 120 deg; zener protection; RoHS /10000 pcs

10,000 : $0.063
1,000 : $0.067
100 : $0.072
1 : $0.088

2,000

93LC56BT-I/SN

Microchip Technology Inc

EEPROM (Electrically Erasable PROM); 93LC56BT-I/SN; MICROCHIP TECHNOLOGY; 2.5 V; Serial; EEPROM; 5.5 V
RoHS : Compliant

3,300 : $0.337
500 : $0.38
100 : $0.423
30 : $0.519
10 : $0.611
1 : $0.831

1,736

MC56F84786VLK

NXP Semiconductors

Microcontrollers (MCU); MC56F84786VLK; NXP SEMICONDUCTORS; 32 kB; 100 MHz; 68; 256 kB
RoHS : Compliant

480 : $13.627
100 : $15.428
50 : $17.435
30 : $18.651
10 : $19.902
1 : $22.109

905

MC56F84789VLL

NXP Semiconductors

Microcontrollers (MCU); MC56F84789VLL; NXP SEMICONDUCTORS; 32 kB; 100 MHz; 81; 256 kB
RoHS : Compliant

450 : $12.735
100 : $14.012
50 : $14.876
30 : $16.079
10 : $17.711
1 : $21.242

870

MC56F8025VLD

NXP Semiconductors

Microcontrollers (MCU); MC56F8025VLD; NXP SEMICONDUCTORS; 4 kB; 32 MHz; 35; 32 kB
RoHS : Compliant

800 : $14.658
500 : $15.124
100 : $16.495
50 : $17.65
10 : $20.68
1 : $24.341

638

MC56F8006VLF

NXP Semiconductors

Microcontrollers (MCU); MC56F8006VLF; NXP SEMICONDUCTORS; 2 kB; 32 MHz; 26; 16 kB
RoHS : Compliant

100 : $6.964
30 : $8.961
10 : $11.238
1 : $14.501

564

SPC5604BK0VLL4

NXP Semiconductors

Microcontrollers (MCU); SPC5604BK0VLL4; NXP SEMICONDUCTORS; 32 kB; FLASH; 7
RoHS : Compliant

490 : $18.218
100 : $20.176
50 : $21.46
30 : $22.626
10 : $24.655
1 : $28.919

445

SPC5643LFF2MLQ1

NXP Semiconductors

Microcontrollers (MCU); SPC5643LFF2MLQ1; NXP SEMICONDUCTORS; 128 kB; FLASH; 16; 120 MHz
RoHS : Compliant

60 : $34.206
30 : $36.569
10 : $39.956
1 : $47.002

120

SPC5605BK0VLL6

NXP Semiconductors

Microcontrollers (MCU); SPC5605BK0VLL6; NXP SEMICONDUCTORS; 64 kB; FLASH
RoHS : Compliant

90 : $23.196
50 : $25.339
30 : $27.282
10 : $30.418
1 : $36.567

SPC5606SF2VLQ6

NXP Semiconductors

Microcontrollers (MCU); SPC5606SF2VLQ6; NXP SEMICONDUCTORS; 48 kB; FLASH; 105; 64 MHz
RoHS : Compliant

60 : $32.06
25 : $35.792
10 : $41.241
1 : $50.508

C0402C562K5RACAUTO

KEMET Corporation

Ceramic capacitor SMD; 0402; 5.6nF; 50V; X7R; 10%
RoHS : Compliant

100,000 : $0.064
50,000 : $0.07
20,000 : $0.071
10,000 : $0.091
1,000 : $0.111
100 : $0.125
10 : $0.245
1 : $0.373

SPC5606SF2VLU6

NXP Semiconductors

Microcontrollers (MCU); SPC5606SF2VLU6; NXP SEMICONDUCTORS; 48 kB; FLASH; 133; 64 MHz
RoHS : Compliant

40 : $37.613
25 : $42.348
10 : $47.296
1 : $58.164

SPC5606BK0MLU6

NXP Semiconductors

Microcontrollers (MCU); SPC5606BK0MLU6; NXP SEMICONDUCTORS; 80 kB; FLASH
RoHS : Compliant

40 : $29.405
10 : $34.089
1 : $41.332

93LC56B-I/SN

Microchip Technology Inc

EEPROM (Electrically Erasable PROM); 93LC56B-I/SN; MICROCHIP TECHNOLOGY; 2.5 V; EEPROM; Serial; 5.5 V
RoHS : Compliant

1,000 : $0.34
500 : $0.38
100 : $0.441
30 : $0.509
10 : $0.59
1 : $0.72

Master Electronics

93LC56BT-E/OT

Microchip Technology Inc

EEPROM - Serial-Microwire - 2Kbit (128 x 16) - 3.3V/5V - Automotive - 6-Pin SOT-23 - Tape&Reel
RoHS : Compliant

51,000 : $0.2813
27,000 : $0.2828
15,000 : $0.2837
12,000 : $0.2844
9,000 : $0.2869
6,000 : $0.2876
3,000 : $0.2893
1,000 : $0.2965

3,000

93LC56B-E/ST

Microchip Technology Inc

EEPROM - Serial-Microwire - 2Kbit (128 x 16) - 3.3V/5V - Automotive - 8-Pin TSSOP - Tube
RoHS : Compliant

15,000 : $0.4064
10,000 : $0.4074
7,500 : $0.4167
5,000 : $0.4177
2,500 : $0.4231
1,000 : $0.4459
300 : $0.4714
100 : $0.4925

93LC56C/S15K

Microchip Technology Inc

2k 256 X 8 OR 128 X 16 SERIAL EE DIE in WAFFLE PK
RoHS : Compliant

15,000 : $0.2593
10,000 : $0.2645
7,500 : $0.2652
5,000 : $0.2658
2,500 : $0.2727
1,000 : $0.287
500 : $0.2877
100 : $0.3134

IELHK1111REC56220.0E01V

Sensata Circuit Breakers

CIR BRKR HYD MAG
RoHS : Compliant

21 : $204.63
12 : $210.23
6 : $223.42
3 : $299.07
1 : $307.61

HA1F-21C56-S

IDEC Corporation

RoHS : Compliant

500 : $22.29
250 : $22.63
100 : $23.25
50 : $24.24
25 : $25.33
5 : $27.37
1 : $29.26

EXB-D10C561J

Panasonic Electronic Components

Res Thick Film NET 560 Ohm 5% ±200ppm/°C BUS Molded 10-Pin 1206 Concave SMD Automotive T/R
RoHS : Compliant

5,000 : $0.2087
3,750 : $0.2129
2,500 : $0.2281
1,250 : $0.3042

DBAC-56-16-A190

TE Connectivity

DBAC 56-16 A190 MOQ Reduction
RoHS : Compliant

64 : $89.41
48 : $91.24
32 : $129.65
16 : $244.9

LW7L-A1C56G

IDEC Corporation

RoHS : Compliant

250 : $45.7
100 : $46.31
50 : $47.58
25 : $49.61
10 : $51.84
5 : $53.43
1 : $59.88

LW6L-A2C56Y

IDEC Corporation

RoHS : Compliant

250 : $47.64
100 : $48.28
50 : $49.6
25 : $51.73
10 : $54.04
5 : $55.71
1 : $62.43

IUG6-1REC5-69-.100-Q-21

Sensata Circuit Breakers

Circuit Breaker Hydraulic Magnetic 1Pole 0.1A 277VAC
RoHS : Compliant

102 : $27.68
51 : $30.77
21 : $51.03
12 : $53.31
6 : $56.73
3 : $75.94

IUGN66-1REC5-62-20.0

Sensata Circuit Breakers

RoHS : Compliant

50 : $65.48
25 : $70.48
15 : $102.14
10 : $108.5
5 : $118.81
1 : $128.39

IULNK1-1REC5-63-15.0-U

Sensata Circuit Breakers

Circuit Breaker Hydraulic Magnetic 1 Pole IUL Series | Sensata - Airpax IULNK1-1REC5-63-15.0-U
RoHS : Compliant

102 : $48.87
51 : $55.94
21 : $88.84
12 : $92.65
6 : $101.45
1 : $135.81

LA3F-21C56-G

IDEC Corporation

Switch Selector N.O./N.C. DPDT 90° Knob 5A 250VAC 125VDC Solder Tab 250000Cycles Panel Mount
RoHS : Compliant

500 : $21.16
250 : $21.48
100 : $22.09
50 : $23.07
25 : $24.14
10 : $24.91
1 : $28.01

DFK-PC-5/-6-GF-SH-7-62

Phoenix Contact

Feed-through header - nominal current: 41 A - rated voltage (III/2): 630 V - nominal cross section: 6 mm² - number of positions: 6 - pitch: 7.62 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 5 mm
RoHS : Compliant

1,000 : $10.3073
500 : $10.4643
250 : $10.7252
100 : $10.8885
50 : $11.5107
30 : $12.3961
10 : $12.9959

CD15FC561JO3F

Knowles CDE

Mica Capacitor - Standard Dipped - 560pF (+/-) 5% - 300VDC - -55°C to 125°C - TC= 0 to 70ppm/°C - RoHS
RoHS : Compliant

5,000 : $4.11
2,500 : $4.12
1,000 : $4.15
500 : $4.42
300 : $4.64
100 : $4.9
50 : $5.71
5 : $9.69

Neutron USA

DELL-CC5624S

Dell Computer

DELL ECOLOOP PRO SLIM BRIEFCASE 15

1 : $69.99

112

SPC5674FF3MVV3

NXP Semiconductors

32-bit Microcontrollers - MCU 4Mb Flash, 256k RAM
RoHS : Not Compliant

1 : $184.99

ODC-56B

Amseco / Potter

Magnetic / Reed Switches SPDT OVERHEAD FORM C

1 : $99.99

C-56U

Triad Magnetics

Power Inductors - Leaded CHOKE 0.035H at 2.0mADC w/Lugs
RoHS : Compliant

1 : $69.99

IHC5-6/OVP

International Power

Linear Power Supplies +5V 6A PWR SPLY Made in the USA

1 : $385.98

SPC56ELADPT144S

STMicroelectronics

Sockets & Adapters Socketed Mini Mod SPC56EL LQFP144

1 : $910.31

187C56

Hammond Manufacturing

Power Transformers Single Primary 115V 12.3VA, 56V CT @.21A
RoHS : Compliant

1 : $39.99

SPC563M64AVB176

STMicroelectronics

Sockets & Adapters Vertical base brd SPC563M64 QFP176

1 : $1,092.41

BBBWL-SC-562

BeagleBoard

Single Board Computer, BeagleBone Black Wireless Development Board, WiFi BT, MPU ARM Cortex-A8

1 : $344.46

EVC561

ifm efector inc

5-wire M12 straight female cordset; PUR; 30M; shielded; shield not connected

1 : $255.36

HCC5-6/OVP-AG

Bel Power Solutions

Linear Power Supplies +5/-5, 6/6A
RoHS : Compliant

1 : $849.99

DPC-56-420

Signal Transformer Inc

Laminated Core 24VA Power Transformer 115V, 230V Primary Parallel 28V, Series 56V Secondary Parallel 840mA, Series 420mA Through Hole

1 : $59.99

PC-56-15

Signal Transformer Inc

Laminated Core 1VA Power Transformer 115V Primary Parallel 28V, Series 56V Secondary Parallel 30mA, Series 15mA Through Hole

1 : $49.99

IHCC5-6/OVP

International Power

Linear Power Supplies DUAL 5V6A/-5V/6A

1 : $408.82

LGC5600A

Black Box Corporation

GB ETH POE++ MED CONV 10/100 1000-MBPS COP TO 1000-MBPS FBR SFP

1 : $1,145.0

Pasternack Enterprises US

PE3C5622-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to Straight Cut Lead Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly BNC male to straight cut lead low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to straight cut lead low loss cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a straight cut lead cable connection on the other. Our low loss BNC to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C5622-48 can also be known as a low loss BNC plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5622-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. BNC plug to straight cut lead sexless cable assembly PE3C5622-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5622-48 can also be used in the other direction and will be a straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $32.99
25 : $31.34
50 : $29.69
100 : $28.37

1,442

PE3C5622-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to Straight Cut Lead Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly BNC male to straight cut lead low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to straight cut lead low loss cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a straight cut lead cable connection on the other. Our low loss BNC to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C5622-60 can also be known as a low loss BNC plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5622-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. BNC plug to straight cut lead sexless cable assembly PE3C5622-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5622-60 can also be used in the other direction and will be a straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $34.49
25 : $32.77
50 : $31.04
100 : $29.66

1,154

PE3C5640LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder.

100

PE3C5620

Pasternack Enterprises

PE3C5654/HS-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 48 inches. MCX Plug to Black FAKRA Jack Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX plug to black FAKRA jack low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. MCX plug to black FAKRA jack low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with MCX cable connection on one end and FAKRA cable connection on the other. Our low loss MCX to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. This MCX to FAKRA cable is a plug to jack coax assembly, PE3C5654/HS-48, can also be known as a low loss MCX male to FAKRA female cable assembly and will be shipped same-day as it is purchased. MCX male to FAKRA female cable assembly PE3C5654/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MCX plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5654/HS-48 can also be used in the other direction and will be FAKRA jack to MCX plug cable assembly if the opposite connectivity is required. Low loss MCX male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to black FAKRA jack low loss cable 48 inch length using LMR-100 coax with heatshrink.

1 : $56.79
25 : $53.95
50 : $51.11
100 : $48.84

PE3C5657

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 3.5mm Male to Straight Cut Lead Cable Using PE-SR405AL Coax., Radio frequency assembly 3.5mm male to straight cut lead cable using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to straight cut lead cable using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and straight cut lead cable connection on the other. Our 3.5mm to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This 3.5mm to straight cut lead cable is a male to sexless coax assembly, PE3C5657, can also be known as a 3.5mm plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to straight cut lead sexless cable assembly PE3C5657 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5657 can also be used in the other direction and will be straight cut lead sexless to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to straight cut lead cable using PE-SR405AL coax.

PE3C5623

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to N Female 4 Hole Flange Cable Using RG393 Coax., Radio frequency assembly N female 4 hole flange to N female 4 hole flange cable using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female 4 hole flange to N female 4 hole flange cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type 4 hole flange cable connection on one end and N type 4 hole flange cable connection on the other. Our type N to type N cable assemblies have a female gender on end 1 and female on end 2. This N type to type N cable is a female to female coax assembly, PE3C5623, can also be known as a type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to N type jack cable assembly PE3C5623 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency N type female 4 hole flange to N type female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N jack 4 hole flange to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female 4 hole flange to N female 4 hole flange cable using RG393 coax.

PE3C5632

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to Push-On SMP Female Right Angle Cable Using RG316 Coax., Radio frequency assembly N female 4 hole flange to push-on SMP female right angle cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female 4 hole flange to push-on SMP female right angle cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N 4 hole flange cable connection on one end and right angle SMP cable connection on the other. Our type N to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This type N to SMP cable is a female to female coax assembly, PE3C5632, can also be known as a type N jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. N type jack to SMP jack cable assembly PE3C5632 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency type N female 4 hole flange to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5632 can also be used in the other direction and will be right angle SMP female to type N female 4 hole flange cable assembly if the opposite connectivity is required. type N jack 4 hole flange to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMP cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female 4 hole flange to push-on SMP female right angle cable using RG316 coax.

PE3C5669

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female to MCX Plug Cable Using RG316 Coax., Radio frequency assembly BNC female to MCX plug cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to MCX plug cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and MCX cable connection on the other. Our BNC to MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3C5669, can also be known as a BNC jack to MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3C5669 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC female to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5669 can also be used in the other direction and will be MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug cable using RG316 coax.

PE3C5634

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using PE-P141 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to N female bulkhead cable using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly, PE3C5634, can also be known as a type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to N type jack cable assembly PE3C5634 is built with PE-P141 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead cable using PE-P141 coax.

PE3C5654LF

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to MCX Plug Cable Using LMR-100 Coax, LF Solder. PE3C5654LF is a FAKRA jack to MCX plug cable using LMR-100A coax. This Pasternack FAKRA jack to MCX plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MCX for connector 2. Our jack FAKRA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5654LF FAKRA jack to MCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C5605/HS

Pasternack Enterprises

PE3C5630

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P160, RF Cable Type: PE-P160, RF Cable Impedance: 50 Ohm. 2.4mm Female to 2.4mm Female Cable Using PE-P160 Coax., Radio frequency assembly 2.4mm female to 2.4mm female cable using PE-P160 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm female to 2.4mm female cable using PE-P160 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a female gender on end 1 and female on end 2. This 2.4mm to 2.4mm cable is a female to female coax assembly, PE3C5630, can also be known as a 2.4mm jack to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. 2.4mm jack to 2.4mm jack cable assembly PE3C5630 is built with PE-P160 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 40 GHz maximum frequency 2.4mm female to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm jack to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm female to 2.4mm female cable using PE-P160 coax.

PE3C5667

Pasternack Enterprises

Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. NMO Mount to QMA Male Cable Using RG58 Coax. PE3C5667 is a NMO Mount sexless to QMA male cable using RG58 coax. This Pasternack NMO Mount sexless to QMA male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm QMA for connector 2. Our sexless NMO Mount to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5667 NMO Mount sexless to QMA male cable assembly is constructed with RG58 coax.

PE3C5614

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to Straight Cut Lead Cable Using Tinned RG402 Coax., Radio frequency assembly SMA female 4 hole flange to straight cut lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to straight cut lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5614, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5614 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female 4 hole flange to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5614 can also be used in the other direction and will be straight cut lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to straight cut lead cable using tinned RG402 coax.

TE Connectivity

36502C56NJTDG

TE Connectivity

3650 1008 56nH 5% 2K RL Inductance: .56 µH Inductor Type: High Frequency Current Rating (Max): 1000 mA DC Resistance: .18 Ω Package Size Code: 1008 0.56 µH High Frequency 1000 mA .18 Ω | High Frequency & Rf Inductor | Part Number: 36502C56NJTDG | Internal Number: 1-1879023-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.53
250 : $0.54
100 : $0.56
50 : $0.57
25 : $0.59
10 : $0.6
1 : $0.62

4,865